Determination of temperature impact on cmm residual kinematic errors distribution

• Autorzy: Harmatys W. , Gąska P. , Gąska A. , Gruza M. , Sładek J.

Identyfikatory

DOI

10.12913/22998624/2374

• Języki publikacji: EN

Abstrakty

EN

In case of coordinate machines that use CAA correction matrix, the issue of kine¬matic errors analysis may be based on the determination of residual error distribu¬tion. Temperature changes have an impact on CMM kinematic structure, which may cause the differences in the map of residual errors. As for today, the residual errors were analysed only for the reference temperature. No research was undertaken on the residual errors changes depending on the temperature variations. This paper presents the experiment aimed at residual errors analysis and resulting errors distributions for different temperatures.

Słowa kluczowe

EN

residual errors; CMM correction

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2015
• Tom: Vol. 9, nr 26
• Strony: 113–--117
• Opis fizyczny: Bibliogr. 7 poz., fig., tab.

Twórcy

autor

Harmatys W.

• Laboratory for Coordinate Metrology (M-10), Faculty of Mechanical Engineering, Cracow University of Technology, Jana Pawła II 37, 31-864 Kraków, Poland

autor

Gąska P.

• Laboratory for Coordinate Metrology (M-10), Faculty of Mechanical Engineering, Cracow University of Technology, Jana Pawła II 37, 31-864 Kraków, Poland

autor

Gąska A.

• Laboratory for Coordinate Metrology (M-10), Faculty of Mechanical Engineering, Cracow University of Technology, Jana Pawła II 37, 31-864 Kraków, Poland

autor

Gruza M.

• Laboratory for Coordinate Metrology (M-10), Faculty of Mechanical Engineering, Cracow University of Technology, Jana Pawła II 37, 31-864 Kraków, Poland

autor

Sładek J.

• Laboratory for Coordinate Metrology (M-10), Faculty of Mechanical Engineering, Cracow University of Technology, Jana Pawła II 37, 31-864 Kraków, Poland

Bibliografia

• 1. Trapet E., Franke M., Hartig F., Schwenke H., Wadele F., Cox M., Forbers A., Delbressine F., Schnellkens P., Trenk M., Meyer H., Morltz G., Guth Th., Wanner N.: Traceability of coordinate measuring machines according to the method of the Virtual Measuring Machines, PTB-F-35, Germany, Braunschweig, 1999.
• 2. Sładek J.: Modelowanie i ocena dokładności maszyn oraz pomiarów współrzędnościowych. Praca habilitacyjna, Wydział Mechaniczny, Politechnika Krakowska, 2001.
• 3. Gąska A., Krawczyk M., Kupiec R., Ostrowska K., Gąska P., Sładek J.: Modeling of the residual kinematic errors of coordinate measuring machines using LaserTracer system, The International Journal of Advanced Manufacturing Technology, 73, 1-4, 2014, 497–507.
• 4. Trapet E. et al.: Traceability of coordinate measurements according to the method of the virtual measuring machine. Final report, European Commission SMT- EDG XII/C/5 Project No. Mat. 1 – CT94-0076.
• 5. Schwenke H., Knapp W., Haitjema H., Weckenmann A., Schmitt R., Delbressine F.: Geometric error measurement and compensation of machines – An update. CIRP Annals – Manufacturing Technology, 57, 2008, 660–675.
• 6. Gąska A., Gruza M., Gąska P., Karpiuk M., Sładek J.: Identification and correction of coordinate measuring machine geometrical errors using LaserTracer systems, Advances in Science and Technology Research Journal, 7, 20, 2013, 17–22.
• 7. Gąska A.: Modeling the accuracy of coordinate measurement with use of Monte Carlo method. Ph.D. Dissertation, Cracow University of Technology, 2011.