Selection of a practicable shearer loader based on mechanical properties of coal for Parvadeh 1 mine

• Autorzy: Bakhtavar E. , Shahriar K.

Warianty tytułu

PL

Wybór wrębiarko-ładowarki w oparciu o właściwości mechaniczne węgla w kopalni Parvadeh 1

• Języki publikacji: EN

Abstrakty

EN

Obtaining the maximum productivity with minimum energy consumption in coaling faces, directly depends on selection of the suitable shearer loader machine with the most effective and fitness picks for it and also their arrangement on cutter head. In order to select appropriate shearer loader machine, some in-situ tests have been carried out on C1 coal seam of Parvadeh1 long wall mine located in east of Iran. Studying of the mechanical properties of C1 coal seam demonstrates an extremely low strength of coal. Thus, it was concluded that a kind of two drums shearer (model EL600) with the conical picks can be effectively worked.

PL

Zapewnienie maksymalnej wydajności pracy w rejonie przodka połączonego z minimalnym zużyciem energii związane jest z wyborem odpowiedniego rodzaju urządzenia (wrębiarko-ładowarki), zapewniającego optymalną ilość i układ noży wrębowych. W celu wyboru optymalnej maszyny urabiającej, przeprowadzono badania in situ w złożu węgla C1 w kopalni Parvadeh 1 we wschodnim Iranie, gdzie wydobycie prowadzi się metodą ścianową. Badanie właściwości mechanicznych węgla C1 wykazało, że jest to węgiel o niskich parametrach wytrzymałościowych. Stwierdzono, że do urabiania tego typu węgla optymalnym rozwiązaniem będzie zastosowanie dwóch wrębiarek bębnowych (model EL600) wyposażonych w stożkowe noże wrębowe.

Słowa kluczowe

EN

shearer loader; mechanical properties; C1 coal seam; longwall; Parvadeh 1

PL

wrębiarko-ładowarka; właściwości mechaniczne; pokład węgla C1; wydobycie ścianowe; Parvadeh 1

• Wydawca: Instytut Mechaniki Górotworu PAN
• Czasopismo: Archives of Mining Sciences
• Rocznik: 2013
• Tom: Vol. 58, no. 1
• Strony: 145--157
• Opis fizyczny: Bibliogr. 23 poz., rys., tab., wykr.

Twórcy

autor

Bakhtavar E.

• Department of Mining and Metallurgical Engineering, Urmia University of Technology, Urmia, Iran

autor

Shahriar K.

• Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran

Bibliografia

• Balc C., Demircin M.A., Copur H., Tuncdemir H., 2004. Estimation of specific energy based on rock properties for assessmentof road header performance. Journal of the South African Institute of Mining and Metallurgy 11, 633-643.
• Bilgin N., Demircinb M.A., Copura H., Balcia C., Tuncdemira H., Akcinc N., 2006. Dominant rock properties affectingthe performance of conical picks and the comparison of some experimental and theoretical results. International Journal of Rock Mechanics and Mining Sciences 43 (1), 139-156.
• Chadwick J., 1995. Advances in Face Productivity. Mining Magazine 173 (3), Elsevier publisher, 138-145.
• Chironis N.P., 1978. Coal Age Operating. Handbook of Coal Surface Mining and Reclamation, Vol. 2, New York, McGraw - Hill Inc., 442p.
• Dinescu S., Andraş A., 2009. Modeling of shearer loader cutter head in order to improve energy consumption. Annals of the University of Petroşani, Mechanical Engineering, pp. 67-72.
• Du C., Liu S., Cui X., Li T., 2008. Study on pick arrangement of shearer drum based on load fluctuation. Journal of China University of Mining and Technology 18 (2), 305-310.
• Evans I., 1984. A theory of the cutting force for point attack picks. International Journal of Mining Engineering 2, 63-71.
• Evans I., Pomeroy C.D., 1966. The Strength, Fracture and Workability of Coal. UK National Coal Board, Mining Research Establishment, Pergamon Press, London, 277p.
• Evenden M.P., Edwards J.S., 1985. Cutting theory and coal seam assessment techniques and their application to shearerdesign. Mining Science and Technology 2 (4), 253-270.
• Goktan R.M., 1992. A theoretical comparison of the performance of drag picks in relation to coal strength parameters. Technical note, Journal of the South African Institute of Mining and Metallurgy 92 (4), 85-87.
• Goktan R.M., 1997. A suggested improvement on Evans’ cutting theory for conical bits. In: Proceedings of the 4th International Symposium on mine mechanization and automation, Brisbane, Queensland, Australia, Volume 1, p. A4-57/A4-61.
• Goktan R.M., Gunes N., 2005. A semi-empirical approach to cutting force prediction for point-attack picks. Journal of the South African Institute of Mining and Metallurgy 105, 257-264.
• Hekimoglu O.Z., 1995. The radial line concept for cutting head picks lacing arrangements. International Journal of Rock Mechanics and Mining Sciences & Geomechanics, 301-311.
• Jaszczuk M., Kania J., 2008. Coal production costs components and coal price as crucial factors in the designation ofcoal output. Arch. Min. Sci., Vol. 53, No 2, p. 183-214.
• Kahraman S., Bilgin N., Feridunoglu C., 2003. Dominant rock properties affecting the penetration of percussive drills. International Journal of Rock Mechanics and Mining Science 40, 711-723.
• Liu S., Du C., Cui X., 2009a. Research on the cutting force of a pick. Mining Science and Technology (China) 19 (4), 514-517.
• Liu S., Du C., Cui X., Cheng X., 2009b. Model test of the cutting properties of a shearer drum. Mining Science and Technology 19, 74-78.
• Rostami J., Ozdemir L., Neil D., 1994. Performance prediction, a key issue in mechanical hard rock mining. Mining Engineering, November, 1264-1267.
• Roxborough F.F., Phillips H.R., 1981. Applied Rock and Coal Cutting Mechanic. Australia Mineral Foundation.
• Roxborough F.F., King P., Pedroncelli E.J., 1981. Tests on the cutting performance of a continuous miner. Journal of the South African Institute of Mining and Metallurgy, 9-25.
• Shahriar K., Bakhtavar E., Moeinzadeh A., 2009. Some experiments in-situ and in laboratory to determine the physicomechanicalproperties of coal. Gospodarka Surowcami Mineralnymi (Mineral Resources Management) Journal 45, 51-62.
• Singh R., Singh J.K., Singh T.N., Dhar B.B., 1995. Cuttability assessment of hard coal seams. International Journal of Geotechnical and Geological Engineering 132, 63-78.
• Singh R., 1999. Mining methods to overcome geo-technical problems during underground working of thick coal seams- casestudies. Transactions of the Institution of Mining and Metallurgy (Section A Mining Industry) 18, A121-A131.