Centrifugal Infiltration of Porous Ceramic Preforms by the Liquid Al Alloy – Theoretical Background and Experimental Verification

• Autorzy: Dolata A. J.

Identyfikatory

DOI

0.1515/amm-2016-0075

• Języki publikacji: EN

Abstrakty

EN

The goal of this work is the description of phenomena occurring during centrifugal infiltration of porous ceramic materials by liquid Al alloy. In this method, the pressure required to infiltration of liquid metal into pores of ceramic is generated by centrifugal force. From the beginning it was assumed that the porous ceramic material will create reinforcement layer in specific area of the casting. The forces that influence on the liquid metal during mould centrifugation and heat exchange between ceramic preform and metal alloy within the area of the front of infiltration were considered in the analysis. The paper presents also selected experiment results.

Słowa kluczowe

EN

aluminium casts; Al2O3 porous performs; local reinforcement; centrifugal infiltration

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 1
• Strony: 411--418
• Opis fizyczny: Bibliogr. 29 poz., rys., tab., wykr., wzory

Twórcy

autor

Dolata A. J.

• Silesian University of Technology, Faculty of Materials Engineering and Metallurgy, Krasinskiego 8, 40-019 Katowice, Poland

Bibliografia

• [1] J. J. Sobczak, L. Drenchev, J. Mater. Sci. Technol. 29, (4), 297-316 (2013).
• [2] S. Golak, R. Przylucki, IEEE Trans. Magn. 47, (12), 4701-4706 (2011).
• [3] S. Golak, M. Dyzia, J. Mater. Sci. Tech. 31, (9), 918-922 (2015).
• [4] E. Olejnik, S. Sobula, T. Tokarski, G. Sikora, Arch. Metall. Mater. 58, (3), 769-773 (2013).
• [5] A. J. Dolata, Arch. Metall. Mater. 59, (1), 343-346 (2014).
• [6] H. G. Kang, D. L. Zhang, B. Cantor, J. Microsc. 169, (2), 239-45 (1993).
• [7] S. Galak, Adv. Mater. Sci. Eng. 2015, (Article ID 681939), doi:10.1155/2015/681939 (2015).
• [8] P. Colombo, Phil. Trans. R. Soc. 364, 109-24 (2006).
• [9] A. R. Studart, U. T. Gonzenbach, E. Tervoort, L. J. Gauckler, J. Am. Ceram. Soc. 89, 1771-89 (2006).
• [10] A. Oziębło, Z. Jaegermann, S. Traczyk, C. Dziubak, Glass and Ceram. 57, 1-7 (2006).
• [11] M. D. M. Innocentini, P. Sepulveda, V. R. Salvini, V. C. Pandolfelli, J. R. Coury, J. Am. Ceram. Soc. 81, (12), 3349-52 (1998).
• [12] S. Dhara, P. A. Bhargava, J. Am. Ceram. Soc. 86, (10), 1645-50 (2003).
• [13] J. M. Tulliani, M. Lombardi, P. Palmero, M. Fornabaio, L. J. Gibson, J. Eur. Ceram. Soc. 33, 1567-76 (2013).
• [14] T. W. Clyne, J. F., Metall. Trans. A. 18A, 1519-30 (1987).
• [15] J. I. Song, Y. C. Yang, K. S. Han, J. Mater. Sci. 31, (10), 2615-21 (1996).
• [16] B. Wang, K. M. Pillai, Metall. Mater. Trans. A. 44, 5834-52 (2013).
• [17] A. Mortensen, L. J. Masur, J. A. Cornie, M. C. Flemings, Metall. Trans. A. 20, 2535-47 (1989).
• [18] A. Boczkowska, P. Chabera, A. J. Dolata, M. Dyzia, R. Kozera, A. Oziębło, Solid State Phenomena 191, 57-66 (2012).
• [19] A. Boczkowska, P. Chabera, A. J. Dolata, M. Dyzia, A. Oziębło, Metalurgija 52, (3), 345-48 (2013).
• [20] R. Gil, A. Jinnapat, A.R. Kennedy, Compos. Part. A. 43, (6), 880-84 (2012).
• [21] A. J. Dolata, Solid State Phenomena 212, 7-10 (2014).
• [22] A. J. Dolata, M. Dyzia, in: Proceedings of ICCM-19, Montreal (2013).
• [23] A. J. Dolata, J. Mater. Eng. Perform. (2016), DOI: : 10.1007/ s11665-016-1901-2 (in press).
• [24] M. Sánchez, J. Rams, A. Ureña, Compos. Part A. 41, 1605-11 (2010).
• [25] 2J. Wannasin, M. C. Flemings, J. Mater. Process. Technol. 169, 143-9 (2005).
• [26] H. Chang, J. Binner, R. Higginson, Wear, 268, 166-71, (2010).
• [27] H. Chang, R. Higginson, J. Binner, J. Microsc., 233, 132-39 (2009).
• [28] J. Binner, H. Chang, R. Higginson, J. Eur. Ceram. Soc., 29, 837-42 (2009).
• [29] M. Potoczek, R. E. Sliwa, Arch. Metall. Mater. 56, 29 1265-9 (2011).

Uwagi

EN

The authors would gratefully acknowledge the financial support from National Science Centre in Poland (Project No. N N508 630 540). Furthermore, the experimental works were partially supported within research work performed at the Silesian University of Technology (Project No. BK 220/RM3/2015).

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę