The parameters of passenger cars engine in terms of real drive emission test

• Autorzy: Merkisz J. , Jacyna M. , Merkisz-Guranowska A. , Pielecha J.

Identyfikatory

DOI

10.5604/08669546.1146998

• Języki publikacji: EN

Abstrakty

EN

This paper presents the preliminary concept research to develop the test used in the measurement of emissions in real traffic conditions for passenger vehicles. Work based on the lack of legal solutions for determining the environmental performance of light vehicles – as opposed to heavy-duty vehicles for which such regulations have specified. The elaboration is to compare the emission test used in clinical approval of passenger cars, while the synthesis of the results obtained under different conditions road tests. The intention is to develop a test for assessing the ecological vehicle in real traffic conditions, where restrictions will only drive type (gasoline engine, diesel engine, hybrid vehicle), which is consistent with the requirements of the certification tests. The result should be the foundation for the development of the test in terms of: the duration, to determine the operating conditions and vehicle and proposals for emission limit values.

Słowa kluczowe

EN

exhaust emission; road tests; passenger cars

PL

emisja spalin; testy drogowe; samochody osobowe

• Wydawca: Warsaw University of Technology, Faculty of Transport
• Czasopismo: Archives of Transport
• Rocznik: 2014
• Tom: Vol. 32, iss. 4
• Strony: 43--50
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Merkisz J.

• Poznan University of Technology, Faculty of Machines and Transportation, Poznan, Poland

autor

Jacyna M.

• Warsaw University of Technology, Faculty of Transport, Warsaw, Poland

autor

Merkisz-Guranowska A.

• Poznan University of Technology, Faculty of Machines and Transportation, Poznan, Poland

autor

Pielecha J.

• Poznan University of Technology, Faculty of Machines and Transportation, Poznan, Poland

Bibliografia

• [1] Regulations Commission: Regulation No 582/2011 of 25 May 2011 implementing and amending Regulation No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council, 2011.
• [2] Merkisz, J., Pielecha, J., The on-road exhaust emissions characteristics of SUV vehicles fitted with diesel engines. Combustion Engines, No. 2, 2011.
• [3] Merkisz, J., Pielecha, J., Radzimirski, S., New trends in emission control in the European Union. Springer Tracts on Transportation and Traffic, Vol. 1, 2014, pp. 170.
• [4] Bougher, T., Khalek, I.A., Trevitz, S., Akard, M., Verification of a Gaseous Portable Emissions Measurement System with a Laboratory System Using the Code of Federal Regulations Part 1065. SAE Technical Paper Series 2010-01-1069, 2010.
• [5] Rubino, L., Bonnel, P., Hummel, R., Krasenbrink, A., Manfredi, U., De Santi, G., Perotti, M., Bomba, G., PEMS light duty vehicles application: experiences in downtown Milan. SAE Technical Paper Series 2007-24-0113, 2007.
• [6] Johnson, K.C., Durbin, T.D., Cocker, D.R., Miller, J.W., Agama, R.J., Moynahan, N., On-road evaluation of a PEMS for measuring gaseous in-use emissions from a heavy-duty diesel vehicle. SAE Technical Paper Series 2008-01-1300, 2008.
• [7] Engeljehringer, K., Automotive emission testing and certification: past, present and future. Current and future trends in automotive emissions, fuels, lubricants and test methods. Bielsko-Biała, 25.05.2011.
• [8] Jehlik, H., Challenge X 2008 – hybrid powered vehicle on-road emissions findings and optimization techniques: a 4 year summary. Sensors 5th Annual SUN (SEMTECH User Network) Conference, September 2008.
• [9] Bonnel, P. Weiss, M., Provenza, A., In-use emissions requirements in the new and future European motor vehicle emissions regulations: state of play. In: 8th Annual SUN Conference, Ann Arbor, 2011.
• [10] Steininger, N., Automotive particulate emissions in European legislation: state of the art and developments to come. In: 13th ETH Conference on Combustion Generated Particles, Zurich 2009.
• [11] Seger, J.P., Vehicle integration for US EPA 2010 emissions and lowest cost of owner-ship. SAE Technical Paper Series 2010-01-1956, 2010.
• [12] Weiss, M., Bonnel P., Hummel, R., Analyzing on-road emissions of light duty vehicles with Portable Emission Measurement Systems (PEMS). European Commission, Joint Research Centre, Institute for Energy, 2011.
• [13] Ortenzi F., Costagliola, M.A., A new method to calculate instantaneous vehicle emissions using OBD data. SAE Technical Paper Series 2010-01-1289, 2010.
• [14] Wei Q., Rooney, R., The on-board PM mass calibration for the real-time PM mass measurement. SAE Technical Paper Series 2010-01-1283, 2010.