The Effect of Fe-Ti Inoculation on Solidification, Structure and Mechanical Properties of High Chromium Cast Iron

• Autorzy: Kopyciński D. , Siekaniec D. , Szczęsny A. , Guzik E. , Nowak A.

Identyfikatory

DOI

10.1515/amm-2017-0321

• Języki publikacji: EN

Abstrakty

EN

The results of studies of the effect of different amounts of the Fe-Ti inoculant on structure and selected mechanical properties of High Chromium Cast Iron (conventionally abbreviated as HCCI) are presented. The main purpose of the inoculation is structure refinement and hence the improvement of casting properties. Generally considered a strong carbide-forming element, titanium is an effective inoculant for the high chromium cast iron. However, there is an optimal amount of titanium addition beyond which the mechanical properties begin to deteriorate. The studies enabled determining the amount of Fe-Ti inoculant optimal for the cast iron of a given chemical composition.

Słowa kluczowe

EN

high chromium cast iron; inoculation; titanium; mechanical properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2183--2187
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr., wzory

Twórcy

autor

Kopyciński D.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Siekaniec D.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Szczęsny A.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Guzik E.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Nowak A.

• Odlewnie Polskie S. A., Based in Starachowice, Al. Wyzwolenia 70, 27-200 Starachowice, Poland

Bibliografia

• [1] H. H. Tian, G. R. Addie, K. V. Pagalthivarthi, Determination of wear coefficients for erosive wear prediction through Coriolis wear testing, Wear. 259 (1-6), 160-170 (2005).
• [2] Cz. Podrzucki, Cast Iron, 1991 ZG STOP Publication, Krakow.
• [3] A. Studnicki, R. Dojka, M. Gromczyk, M. Kondracki, Influence of Titanium on Crystallization and Wear Resistance of High Chromium Cast Iron, Arch. Foundry Eng. 1/16, 117-12 (2016).
• [4] O. N. Dogan, J. A. Hawk, G. Laird II, Solidification structure and abrasion resistance of high chromium white irons, Metall. Mater. Trans. A. 128 A, 1315-1325 (1997).
• [5] D. Kopyciński, E. Guzik, D. Siekaniec, A. Szczęsny, The effect of addition of titanium on the structure and properties of High Chromium Cast Iron, Arch. Foundry Eng. 3/15, 35-38 (2015).
• [6] C. P. Tabrett, I. R. Sare, The effect of heat treatment on the abrasion resistance of alloy white irons, Wear. 203, 206-219 (1997).
• [7] A. Studnicki, Crystallization temperatures of chromium cast iron in function cooling rate, Arch. Foundry Eng. 48/15, 371-378 (2005).
• [8] X. B. Yaer, Erosive wear characteristics of spheroidal carbides cast, Wear. 264 (11-12), 947-957 (2008).
• [9] A. Bedolla-Jacuinde, S. L. Aguilar, B. Hernandez, Eutectic modification in a low-chromium white cast iron by a mixture of titanium, rare earths, and bismuth: I. Effect on microstructure, J. Mater. Eng. Perform. 14 (2), 149-157 (2005).
• [10] A. B. Jacuinde, W. M. Rainforth, The wear behavior of highchromium white cast irons as a function of silicon and Mischmetal content, Wear. 250, 449-461 (2001).
• [11] Y. Matsubara, Solidification and abrasion wear of white cast irons alloyed with 20% carbide forming elements, Wear. 250, 502-510 (2001).
• [12] D. Kopyciński, D. Siekaniec, A. Szczęsny, M. Sokolnicki, A. Nowak, The Althoff-Radtke test adapted for High Chromium Cast Iron, Arch. Foundry Eng. 4/2016, 61-64 (2016).
• [13] A. Bedolla-Jacuinde, B. Hernandez, L. Bejar-Gomez, SEM study on the M7C3 carbide nucleation during eutectic solidification of highchromium white irons, Z. Metallkd. 96 (12), 1380-138 (2005).
• [14] A. E. Karantzalis, A. Lekatou, E. Diavati, Effect of Destabilization Heat Treatments on the Microstructure of High chromium Cast Iron: A Microscopy Examination Approach, J. Mater. Eng. Perform. 18 (8), 1078-1085 (2009).
• [15] P. Villars, A. Pronce, H. Okamoto, Handbook of Ternary Alloy Phase Diagrams, ASM International 5, 6624 (1995).

Uwagi

EN

The study was co-financed by NCBiR as a targeted project No. PBS /B5/44/2015

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).