Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Purpose: To evaluate the superpave design performance using Epolene (EE-2) as modifier, since SUPERPAVE design is a modified and sophisticated aspect as compared to previous mix design for asphalt mixtures. This is primarily due to the fact that superpave design mix also takes into consideration properties of materials beside asphalt. Design/methodology/approach: This study was conducted using Epolene (EE-2) as modifier in order to evaluate the performance of SUPERPAVE suitability for construction of roads in Alfaraa campus (King Khalid University) Abha, in Asir Province of Saudi Arabia. Glow number test, dynamic modulus test and indirect tensile strength test were conducted to evaluate the performance of EE-2 modifier against the control mixture. Findings: The mixture modified with EE-2 gave better performance in terms of temperature-based performance and resistance to moisture damage. Also, larger values of E*/sinφ were obtained for EE-2 modified mixture at various loading frequencies and temperature in comparison to control mixture. Research limitations/implications: The Epolene modifier successfully enhances and improves the SUPERPAVE mixture performance. Further studies are required to evaluate the performance of EE-2 modifier at much lower temperature ranges. Practical implications: The results of the study allow us to recommend the investigated asphalt mixture for applied for the construction of roads in the Alfaraa (new campus of King Khalid University), Abha, Asir province, Saudi Arabia. Originality/value: A modified asphalt mixture has been proposed that has better performance at higher and lower temperatures. The developed asphalt mixture is more resistant to moisture damage than the compared to control mixture.
Wydawca
Rocznik
Tom
Strony
49--54
Opis fizyczny
Bibliogr. 8 poz.
Twórcy
autor
- Department of Civil Engineering, King Khalid University, Abha, Saudi Arabia
autor
- Department of Civil Engineering, King Khalid University, Abha, Saudi Arabia
autor
- Department of Geography, LADES, FLSH-M, Hassan II University of Casablanca, Mohammedia, Morocco
autor
- Department of Civil Engineering, King Khalid University, Abha, Saudi Arabia
autor
- Department of Civil Engineering, King Khalid University, Abha, Saudi Arabia
autor
- Department of Civil Engineering, Jamia Millia Islamia, New Delhi, India
autor
- Department of Civil Engineering, King Khalid University, Abha, Saudi Arabia
autor
- Department of Logistics and Technical Support of Rescue Operations, National University of Civil Defence of Ukraine, Kharkiv Ukraine
autor
- Department of Logistics and Technical Support of Rescue Operations, National University of Civil Defence of Ukraine, Kharkiv Ukraine
Bibliografia
- [1] P. Jitsangiam, P. Chindaprasirt, H. Nikraz, An Evaluation of the Suitability of SUPERPAVE and Marshall Asphalt Mix Designs as They Relate to Thailand’s Climatic Conditions, Construction and Building Materials 40 (2013) 961-970. DOI: https://doi.org/10.1016/j.conbuildmat.2012.11.011
- [2] I.M. Asi, Performance Evaluation of SUPERPAVE and Marshall Asphalt Mix Designs to Suite Jordan Climatic and Traffic Conditions, Construction and Building Materials 21/8 (2007) 1732-1740. DOI: https://doi.org/10.1016/j.conbuildmat.2006.05.036
- [3] S. Liu, W. Cao, X. Li, Z. Li, C. Sun, Principle Analysis of Mix Design and Performance Evaluation on SUPERPAVE Mixture Modified with Buton Rock Asphalt, Construction and Building Materials 176 (2018) 549-555. DOI: https://doi.org/10.1016/j.conbuildmat.2018.05.045
- [4] A.I. Kareem, H. Nikraz, H. Asadi, Performance of Hot- Mix Asphalt Produced with Double Coated Recycled Concrete Aggregates, Construction and Building Materials 205 (2019) 425-433. DOI: https://doi.org/10.1016/j.conbuildmat.2019.02.023
- [5] A.H. Guha, G.J. Assaf, Effect of Portland Cement as a Filler in Hot-Mix Asphalt in Hot Regions, Journal of Building Engineering 28 (2020) 101036. DOI: https://doi.org/10.1016/j.jobe.2019.101036
- [6] Ş. Sargin, M. Saltan, N. Morova, S. Serin, S. Terzi, Evaluation of Rice Husk Ash as Filler in Hot Mix Asphalt Concrete, Construction and Building Materials 48 (2013) 390-397. DOI: https://doi.org/10.1016/j.conbuildmat.2013.06.029
- [7] H. Ali, L.M. McCarthy, A. Welker, “Performance of Hot In-Place Recycled SUPERPAVE Mixtures in Florida, Construction and Building Materials 49 (2013) 618-626. DOI: https://doi.org/10.1016/j.conbuildmat.2013.08.043
- [8] M.I. Khan, M.H. Sutanto, S. Sunarjono, S. Room, N.I.M. Yusoff, Effect of Crumb Rubber, Epolene (EE- 2), and Date Palm Ash as Modifiers on the Performance of Binders and Mixtures: A Sustainable Approach, Sustainability 11/22 (2019) 6484. DOI: https://doi.org/10.3390/su11226484
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-bc57bb9e-0667-4de6-a616-33adab1d43b9