Influence of thermo-plastic deformation on grain size of high-manganese austenitic X11MnSiAl17-3-1 steel

• Autorzy: Dobrzański L.A. , Czaja M. , Borek W. , Labisz K.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of the paper is to compare fragmentation of grains after thermo-mechanical treatment using Gleeble 3800 simulator of high-manganese austenitic X11MnSiAl7-1-3 steel. Design/methodology/approach: The hot-working behaviour was determined 4- and 8-stage compression tests performed in a temperature range of 850 to 1100°C by the use of the Gleeble 3800 thermo-mechanical simulator. The comparison between two type of thermo-mechanical treatment has been established based on microstructure research and X-ray diffraction analysis. Findings: It was found that steel X11MnSiAl7-1-3 in initial state and after thermo-mechanical treatment on Gleeble simulator has homogeneous austenite structure. Compression tests were realized in the temperature range from 850 to 1050°C with the true strain 4x0.23 for 4-stage process, and 0.4 in the first deformation, and 0.25 and 0.2 in the following deformations for 8-stage process. The multi-stage compression examination gives the possibility to refine the austenite microstructure. Based on microstructures research were found that this process perfectly led to fragmentation of the material structure which may result in the ideal material properties. Practical implications: The obtained microstructure after Gleeble simulations can be useful in determination of power-force parameters of hot-rolling for thin sheets to obtain fine-grained austenitic microstructures. Originality/value: The hot-working behaviour and microstructure evolution in various conditions of plastic deformation for new-developed high-manganese austenitic steels were investigated.

Słowa kluczowe

EN

high-manganese steel; thermo-mechanical simulation; grain size

PL

stal wysokomanganowa; symulacja cieplno-mechaniczna; wielkość ziarna

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2013
• Tom: Vol. 61, nr 2
• Strony: 169--174
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Dobrzański L.A.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology,ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Czaja M.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology,ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Borek W.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology,ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Labisz K.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology,ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] L.A. Dobrzański, W. Borek, M. Ondrula, Thermo-mechanical processing and microstructure evolution of high-manganese austenitic TRIP-type steels, Journal of Achievements in Materials and Manufacturing Engineering 53/2 (2012) 59-66.
• [2] T. Tański, K. Labisz, Electron microscope investigation of PVD coated aluminium alloy surface layer, Solid State Phenomena 186 (2012) 192-197.
• [3] T. Tański, K. Lukaszkowicz, Structure and properties of PVD coatings deposited on the aluminium alloys, Surface Engineering 28/8 (2012) 598-604.
• [4] SafetyNet, 2009, Vehicle Safety, retrieved 15.12.2013.
• [5] ULSAB-AVC, www.worldautosteel.com.
• [6] L.A. Dobrzanski, M. Krupinski, K. Labisz, B. Krupinska, A. Grajcar, Phases and structure characteristics of the near eutectic Al-Si-Cu alloy using derivative thermo analysis (Conference Paper), Materials Science Forum 638-642 (2010) 475-480.
• [7] L.A. Dobrzański, W. Borek, Hot-working behaviour of advanced high-manganese C-Mn-Si-Al steels, Materials Science Forum 654-656 (2010) 266-269.
• [8] Advanced High Strength Steel (AHSS) Application Guidelines, International Iron and Steel Institute, 2013, www.worldautosteel.org,
• [9] L.A. Dobrzański, W. Sitek, M. Krupiński, J. Dobrzański, Computer aided method for evaluation of failure class of materials working in creep conditions, Journal Of Materials Processing Technology 157 (2004) 102-106.
• [10] J.A. Jiménez, G. Frommeyer, Analysis of the microstructure evolution during tensile testing at room temperature of high-manganese austenitic steel, Materials Characterization 61 (2010) 221-226.
• [11] M. Krupinski, L.A. Dobrzanski, J.H. Sokolowski, W. Kasprzak, G. Byczynski, Methodology for automatic control of automotive Al-Si cast components, Materials Science Forum 539-543 (2007) 339-344.
• [12] Z. Jaglarz, W. Leskiewicz, M. Morawiecki, Technology and equipment rolling flat products, Publishing house Silesia, Katowice, 1979 (in Polish).
• [13] W. Ozgowicz, K. Labisz, Analysis of the state of the fine-dispersive precipitations in the structure of high strength steel Weldox 1300 by means of electron diffraction, Journal of Iron and Steel Research, International 18 (2011) 135-142.
• [14] L.A. Dobrzański, T. Tański, Influence of aluminium content on behaviour of magnesium cast alloys in bentonite sand mould, Solid State Phenomena 147-149 (2009) 764-769.
• [15] L.A. Dobrzański, A. Grajcar, W. Borek, Microstructure evolution of C-Mn-Si-Al-Nb high-manganese steel during the thermo-mechanical processing, Materials Science Forum 638 (2010) 3224-3229.
• [16] L.A. Dobrzański, W. Borek, Thermo-mechanical treatment of Fe-Mn-(Al, Si) TRIP/TWIP steels, Archives of Civil and Mechanical Engineering 12/3 (2012) 299-304.
• [17] A. Grajcar, M. Opiela, G. Fojt-Dymara, The influence of hot-working conditions on a structure of high-manganese steel, Archives of Civil and Mechanical Engineering 9/3 (2009) 49-58.
• [18] L.A. Dobrzański, R. Maniara, J. Sokolowski, W. Kasprzak, M. Krupinski, Z. Brytan, Applications of the artificial intelligence methods for modeling of the ACAlSi7Cu alloy crystallization process, Journal of Materials Processing Technology 192 (2007) 582-587.
• [19] T. Tański, Characteristics of hard coatings on AZ61 magnesium alloys, Journal of Mechanical Engineering 59/3 (2013) 165-174.
• [20] L.A. Dobrzański, W. Borek, Hot-rolling of advanced high-manganese C-Mn-Si-Al steels, Materials Science Forum 706/709 (2012) 2053-2058.
• [21] A. Grajcar, W. Borek, The thermo-mechanical processing of high-manganese austenitic TWIP-type steels, Archives of Civil and Mechanical Engineering 8/4 (2008) 29-38.