Strength analysis of an off-road lorry frame

• Autorzy: Dižo Ján , Blatnický Miroslav , Droździel Pawel , Semenov Stanislav , Mikhailov Evgeniy , Kurtulík Jakub

Identyfikatory

DOI

10.20858/sjsutst.2021.110.2

• Języki publikacji: EN

Abstrakty

EN

The lorry frame is the main carrying part of a lorry, composed of several components. These components are connected by joints into one structural unit and it forms the lorry chassis. The contribution of this article is focused on thestrength analyses of a backbone frame, which is used on an off-road lorry chassis. Strength analyses are carried out utilising the finite element method. This article presents a created three-dimensional model of the frame and definition of boundary conditions (loads, the definition of degrees of freedom) needed for simulation computations. Results of the numerical calculations are the main parts of this article. Attention is mainly centred on the distribution of stresses of the frame under defined loads and its deformations.

Słowa kluczowe

EN

frame; offroad truck; strength analysis; finite element method

PL

rama; samochód terenowy; analiza wytrzymałościowa; metoda elementów skończonych

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2021
• Tom: z. 110
• Strony: 23--33
• Opis fizyczny: Bibliogr. 37 poz.

Twórcy

autor

Dižo Ján

• Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

• https://orcid.org/0000-0001-9433-392X

autor

Blatnický Miroslav

• Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

• https://orcid.org/0000-0003-3936-7507

autor

Droździel Pawel

• Faculty of Mechanical Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin

• https://orcid.org/0000-0003-2187-1633

autor

Semenov Stanislav

• Educational and Scientific Institute of Transport and Building, Volodymyr Dahl East Ukrainian National University, Central Avenue 59A/303, Severodonetsk

• https://orcid.org/0000-0002-5236-4557

autor

Mikhailov Evgeniy

• Educational and Scientific Institute of Transport and Building, Volodymyr Dahl East Ukrainian National University, Central Avenue 59A/303, Severodonetsk, Ukraine

• https://orcid.org/0000-0002-6667-5348

autor

Kurtulík Jakub

• Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

• https://orcid.org/0000-0003-3544-9089

Bibliografia

• 1. Barta Dalibor, Martin Mruzek, Martin Kendra, Paweł Kordos, Leszek Krzywonos. 2016. “Using of non-conventional fuels in hybrid vehicle drives”. Advanced in Science and Technology – Research Journal 10(32): 240-247. ISSN: 2299-8624. DOI: 10.12913/22998624/65108.
• 2. Barta Dalibor, Martin Mruzek, Robert Labuda, Tomas Skrucany, Leszek Gardynski. 2018. “Possibility of increasing vehicle energy balance using coasting”. Advances in Science and Technology – Research Journal 12(1): 228-235. ISSN: 2299-8624. DOI: 10.12913/22998624/86215.
• 3. Figlus Tomasz, Łukasz Kuczyński. 2018. “Selection of a semi-trailer for the haulage of long oversize loads, taking into account an analysis of operational damage”. XI International Science-Technical Conference Automotive Safety. IEEE Proceedings Paper. DOI: 10.1109/AUTOSAFE.2018.8373342.
• 4. Fomin Oleksij, Juraj Gerlici, Alyona Lovska, Kateryna Kravchenko, Yuliia Fomina, Tomas Lack. 2019. “Determination of the strength of the containers fittings of a flat wagon loaded with containers”. 9th International Scientific Conference on Research and Development of Mechanical Elements and Systems IRMES 2019. University of Kragujevac. 5-7 September, Kragujevac, Serbia. ISSN: 1757-8981. DOI: 10.1088/1757-899X/659/1/012056.
• 5. Fomin Oleksij, Juraj Gerlici, Alyona Lovskaya, Kateryna Kravchenko, Oleksii Burlutski, Vladimir Hauser. 2019. “Peculiarities of the mathematical modelling of dynamic loading on containers in flat wagons transportation”. MATEC Web of Conferences 254. ISSN: 2261-1009. DOI: 10.1051/matecconf/201925402039.
• 6. Gardynski Leszek, Jacek Caban, Dalibor Barta. 2018. “Research of composite materials used in the construction of vehicle bodywork”. Advanced in Science and Technology – Research Journal 12(3): 181-187. ISSN: 2299-8624. DOI: 10.12913/22998624/92096.
• 7. Gerlici Juraj, Tomas Lack, Jozef Harusinec. 2014. “Development of test stand prototype for rail vehicles brake components testing”. Communications – Scientific Letters of the University of Zilina (Komunikacie) 16(3): 27-32. ISSN: 1335-4205.
• 8. Gerlici Juraj, Tomas Lack, Jozef Harušinec. 2012. “Test stand properties analysis for wheels tread wear in accordance to the laboratory simulated railway operation”. Proceedings of the 13th Mini Conference on Vehicle System Dynamics, Identification and Anomalies VSDIA 2012: 157-165. Budapest University of Technology and Economics. 5-7 November, Budapest, Hungary. ISBN: 978-963313102-2.
• 9. Gülenç B., H. Kocaman, B. Çevik, A. Durgutlu, T. Fındık. 2016. “The effect of cold and hot reformation process to mechanical properties of deformed automobile chassis material”. Mechanika 22(5): 376-379.
• 10. Handrik Marian, Peter Kopas, Vladmimir Baniari, Milan Vasko, Milan Saga. 2017. “Analysis of stress and strain of fatigue specimens localized in the cross-sectional area of the gauge section testing on bi-axial fatigue machine loaded in the high-cycle fatigue region”. Procedia Engineering 177: 516-519. ISSN: 1877-7058. DOI: 10.1016/j.proeng.2017.02.254.
• 11. Jakubovicova Lenka, Alzbeta Sapietova, Jan Moravec. 2018. “Static analysis of transmission tower beam structure”. MATEC Web of Conference 244. ISSN: 2261-236X. DOI: 10.1051/matecconf/201824401011.
• 12. Jakubovicova Lenka, Peter Zavadinka, Jan Jakubovic. 2016. “Transport duty cycle measurement of hybrid drive unit for mixing drum”. Advanced Mechatronics Solutions 393: 219-224. ISSN: 2194-5357. DOI: 10.1007/978-3-319-23923-1_33.
• 13. Kalincak Daniel, Lubos Bartik, Juraj Grencik. 2012. “The hybrid traction – the way of fuel utilization improvement”. Facta Universitas – Series Mechanical Engineering 10(2): 163-170. ISSN: 0354-2025.
• 14. Klimenda Frantisek, Josef Soukup, Milan Zmindak, Blanka Skocilasova. 2018. “Dissemination of shock waves in thin isotropic plates”. MATEC Web of Conferences 254. ISSN: 2261-236X. DOI: 10.1051/matecconf/201925405005.
• 15. Kostrzewski Mariusz. 2018. “Analysis of selected acceleration signals measurements obtained during supervised service conditions – study of hitherto approach”. Journal of Vibroengineering 20(4): 1850-1866. ISSN: 1392-8716. DOI: 10.21595/jve.2018.19367.
• 16. Kozioł, Mateusz, Tomasz Figlus. 2015. “Failure Progress of 3D Reinforced GFRP Laminate during Static Bending, Evaluated by Means of Acoustic Emission and Vibrations Analysis”. Materials 8: 8751-8767. DOI: 10.3390/ma8125490.
• 17. Kravchenko Alexander, Olga Sakhno, Alexander Lukichov. 2014. “Research of dynamics of tire wear of trucks and prognostication of their service life”. Transport Problems 7(4): 85-94. ISSN: 1896-0596.
• 18. Kravchenko Alexander, Olga Sakhno, Alexander Lukichov. 2014. “Trucks tires resource controlling by control of process of their wearing-out”. Transport Problems 9(1): 83-93. ISSN: 1896-0596.
• 19. Labuda Robert, Dalibor Barta, Andrej Kovalcik. 2010. “Effective use of the braking effect of vehicle drivetrain at deceleration”. XLI. International Scientific Conference of Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines (KOKA 2020): 206-211. Technical University Liberec. 06-07 September, Liberec, Czech Republic.
• 20. Leitner Bohus, Lucia Figuli. 2018. “Fatigue life prediction of mechanical structures under stochastic loading”. MATEC Web of Conferences 157. ISSN: 2261-1009. DOI: 10.1051/matecconf/201815702024.
• 21. Leitner Bohus. 2010. “A new approach to identification and modelling of machines dynamic systems behaviour”. Proceedings of the 19th International Scientific Conference on Transport Means TRANSPORT MEANS 2010: 17-20. Kaunas University of Technology. 21-22 October, Kaunas, Lithuania. ISSN: 1822-296X.
• 22. Leitner Bohuš. 2014. “Fatigue damage analysis and fatigue life prediction of lorry frame under random excitation”. 18th International Conference on Transport Means Transport Means 2014: 9-14. Kaunas University of Technology. 23-24 October, Kaunas, Lithuania. ISBN: 1822-296X.
• 23. Liščák Štefan, Rostislav Matějka, Vladimír Rievaj, Marián Šulgan. 2006. Chassis of road vehicles (In Slovak). Žilina: University of Žilina. ISBN: 80-8070-588-7.
• 24. Melaika M., S. Nagurnas, R. Pečeliūnas, N. Višniakov, G. Garbinčius. 2013. “Investigation on distribution of stresses in steel and aluminium alloy arms of a car suspension system”. Mechanika 19(6): 632-640.
• 25. Melnik Rafal, Bogdan Sowinski. 2017. “Analysis of dynamics of a metro vehicle model differential wheelsets”. Transport Problems 12(3): 113-124. ISSN: 1896-0596. DOI: 10.20858/tp.2017.12.3.11.
• 26. Ren Yuan, Yongchang Yu, Binbin Zhao, Chuanhui Fan, He Li. 2017. “Finite element analysis and optimal design for the frame of SX360 dump trucks”. Procedia Engineering 174: 638-647. ISSN: 1877-7058. DOI: 10.1016/j.proeng.2017.01.201.
• 27. Savkin Alexey Nikolaevich, Alexander Gorobtsov, KA Badikov. 2016. “Estimation of truck frame fatigue life under service loading”. Procedia Engineering 150: 318-323. ISSN: 1877-7058. DOI: 10.1016/j.proeng.2016.07.020.
• 28. Stastniak Pavol, Lukas Smetanka, Marian Moravcik. 2018. “Structural analysis of a main construction assemblies of the new wagon prototype type Zans.” Manufacturing Technology 18(3): 510-517. ISSN: 1213-2489. DOI: 10.21062/ujep/130.2018/a/1213-2489/MT/18/3/510.
• 29. Suchanek Andrej, Jozef Harusinec, Maria Loulova, Peter Strazovec. 2018. “Analysis of the distribution of temperature fields in the braked railway wheel”. MATEC Web of Conference 157. ISSN: 2261-1009. DOI: 10.1051/matecconf/201815702048.
• 30. Suda Yoshihiro, Juraj Grencik. 1996. “The mechanism of enhanced curving performance of unsymmetric suspension trucks under acting traction/brake torque”. Vehicle System Dynamics 25 (SUPPL): 629-640. ISSN: 0042-3114. DOI: 10.1080/00423119608969225.
• 31. Supardjo, Agus Dwi Anggono, Tri Widodo Besar. 2018. “Finite element analysis of truck frame by using CATIA V5”. Proceeding of the 4th International Conference on Engineering, Technology and Industrial Application ICETIA 2017. Universitas Muhammandiyah Surakarta. 13-14 December, Surakatra, Indonesia. ISSN: 1551-7616. DOI: 10.1063/1.5042949.
• 32. Svoboda Martin, Vaclav Schmid, Josef Soukup, Milan Sapieta. 2018. “Modal analysis of the vehicle model”. Springer Proceedings in Mathematics & Statistics 249: 351-362. ISSN: 2194-1009. DOI: 10.1007/978-3-319-96601-4_32.
• 33. Tatra vehicle design. Available at: https://www.tatratrucks.com/why-tatra/tatra-vehicle-design/tatra-vehicle-design-1/.
• 34. Varjan Pavol, Jozef Gnap, Pavol Ďurana, Mariusz Kostrzewski. 2019. “Research on the relationship between transport performance in road freight transport and revenues from excise duty on diesel fuel in selected European countries”. Transportation Research Procedia 40: 1216-1223. ISSN: 2352-1457. DOI: 10.1016/j.trpro.2019.07.169.
• 35. Vatulia Glib, Anatoliy Falendysh, Yevhen Orel, Mikhailo Pavliuchenkov. 2017. “Structural improvements in a tank wagon with modern software packages”. 10th International Scientific Conference on Transportation Science and Technology TRANSBALTICA 2017: 301-307. Vilnius Gediminas University of Technology. 04-05 May, Vilnius, Lithuania. ISSN: 1877-7058. DOI: 10.1016/j.proeng.2017.04.379.
• 36. Vlk František. 2006. Chassis of engine vehicles (In Czech). Brno: František Vlk Publishing. ISBN: 80-239-6464-X.
• 37. Weyssenhoff Andrzej, Michal Opala, Seweryn Koziak, Rafal Melnik. 2019. “Characteristics and investigation of selected manufacturing defects of passenger car tires”. Transportation Research Procedia 40: 119-126. ISSN: 2352-1457. DOI: 10.1016/j.trpro.2019.07.020.