Numerical Analysis of a Rolling Process for Producing Steel Balls Using Helical Rolls

• Autorzy: Chyła P. , Pater Z. , Tomczak J. , Chyła P.

Identyfikatory

DOI

10.1515/amm-2016-0085

• Języki publikacji: EN

Abstrakty

EN

This paper presents the research results of the balls rolling process according to the conventional and modified methods of rolling. Theoretical analysis was carried out by using numerical methods based on the Finite Element Method. The Simufact package version 10.0 were used for calculation. Simulations of balls rolling were carried out under conditions of 3D state of strain, taking into account the effect of thermal conditions occurring during forming. The study of the achieved results showed that the best rolling process parameters were obtained for the modified method, in which the feed material is heated up to 1150 °C. In this case, the rolling parameters such as: rolling force and torque as well as tool wear reached the smallest values.

Słowa kluczowe

EN

helical rolling; FEM analysis; balls; effective strain

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 485--492
• Opis fizyczny: Bibliogr. 25 poz., rys.

Twórcy

autor

Chyła P.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Al. A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Pater Z.

• Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Tomczak J.

• Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Chyła P.

• AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science Al. A. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] P. Wasilewski, Odlewnictwo jako jedna z najstarszych metod wytwarzania, Archiwum odlewnictwa 1, (1/2), 9-31 (2001).
• [2] http://www.kuzniaostrowiec.neostrada.pl/odkuwki.html
• [3] S. Urbański, J. Kazanecki, Assessment of the strain distribution in the rotary piercing process by the finite element method, Journal Materials Processing Technology 45, 335-340 (1994).
• [4] J. Pietsh, Thievien, FEM simulation of the rotary tube piercing process, MPT International 2, 52-60 (2003).
• [5] E. Ceretti et al., Rotary tube piercing study by FEM Analysis: 3D simulations and Experimental Results, Tube & Pipe Technology March/April, 155-159 (2004).
• [6] K. Komori, Simulation of Mannesmann piercing process by the three-dimensional rigid-plastic finite-element method, International Journal of Mechanical Sciences 47, 1838-1853 (2005).
• [7] Z. Pater, J. Kazanecki, J. Bartnicki, Three dimensional thermo-mechanical simulation of the tube forming process in Diescher’s mill. Journal of Materials Processing Technology 177, 167-170 (2006).
• [8] Z. Pater, J Kazanecki, Thermo-mechanical analysis of piercing plug loads in the skew rolling process of thick-walled tube shell. Metallurgy and Foundry Engineering 32, 1, 31-40 (2006).
• [9] J. Kazanecki, Z. Pater, J Bartnicki, The analysis of the influence of plug shape and its position on piercing process in skew rolling mill. Computer Methods in Materials Science 7, 2, 299-304 (2007).
• [10] Z. Pater, J. Kazanecki, Complex numerical analysis of the tube forming process using Diescher mill. Archives of Metallurgy and Materials 58, 3, 717-724 (2013).
• [11] J. Kazanecki, Z. Pater, Analiza termomechaniczna procesu walcowania pierścieni w trójwalcowej walcarce skośnej. Rudy i Metale Nieżelazne 11, 861-866 (2007).
• [12] Z. Pater, A. Tofil, Experimental and theoretical analysis of the cross - wedge rolling process in cold forming conditions. Archives of Metallurgy and Materials 52, 2, 289-297 (2007).
• [13] Y. F. Qiang, P. B. Song, Analysis on temperature distribution in cross wedge rolling process with finite element method, Journal of Materials Processing Technology 187-188, 392-196 (2007).
• [14] Z. Pater, J. Bartnicki, Finished cross-wedge rolling of hollowed cutters, Archives of Metallurgy and Materials 51, 2, 205-211 (2006).
• [15] Z. Pater, Finite element analysis of cross wedge rolling, Journal of Materials Processing Technology 173, 201-208 (2006).
• [16] Z. Pater, A. Gontarz, W. Weroński, Cross-wedge rolling by means of one Flat wedge and two shaped rolls, Journal of Materials Processing Technology 177, 550-554 (2006).
• [17] Z. Pater, J. Bartnicki, G. Samołyk, Numerical modeling of cross wedge rolling process of ball pin, Journal of Materials Processing Technology 164-165, 1235-1240 (2005).
• [18] J. Bartnicki, Z. Pater, Numerical simulation of three-rolls cross wedge rolling of hollowed shaft, Journal of Materials Processing Technology 164-165, 1154-1159 (2005).
• [19] Z. Pater, The analysis of the state of strain in parts formed by means of the wedgerolls rolling (WRR), Archives of Metallurgy and Materials 50, 3, 675-690 (2006).
• [20] J. Bartnicki, Z. Pater, The aspects of stability in crosswedge rolling processes of hollowed shafts, Journal of Materials Processing Technology 155-156, 1867-1873 (2004).
• [21] Z. Pater, Stress state in cross wedge rolling process, Archives of Metallurgy 48, 1, 21-35 (2003).
• [22] http://www.ec-e.pl/software-pl/Simufact/simufact. forming
• [23] A. Kocańda, Określenie trwałości narzędzia w obróbce plastycznej metali. Informatyka w technologii metali, Gliwice 2003.
• [24] P. Szota, S. Mróz, A. Stefanik, H Dyja, Numerical modelling of the working rolls wear during rods rolling process, Archives of Metallurgy and Materials 56, 2, 495-501 (2011).
• [25] P. Szota, S. Mróz, A. Stefanik, Numeryczne modelowanie zużycia ciągadeł podczas ciągnienia drutu okrągłego, Hutnik Wiadomości hutnicze 1, 138-141 (2011).