Additive manufacturing for health technology applications

• Autorzy: Klimaschewski Sven F. , Raschke Robert , Vehse Mark

Identyfikatory

DOI

10.30464/jmee.2019.3.3.215

• Języki publikacji: EN

Abstrakty

EN

In this study we demonstrate an overview about possibilities in using additive manufacturing for tissue engineering and orthopedic prosthesis. We show the possibilities to produce scaffolds by using a low cost commercial stereolithography system under the use of biocompatible hydrogels like Poly(ethylene glycol) diacrylate. We also demonstrate that it is possible to use a low cost selective laser sintering system to produce individual prostheses to support the healing process in many orthopedic issues.

Słowa kluczowe

EN

additive manufacturing; biocompatible hydrogel; stereolithography; selective laser sintering

PL

wytwarzanie przyrostowe; hydrożel; stereolitografia; selektywne spiekanie laserowe

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2019
• Tom: Vol. 3, No 3
• Strony: 215--220
• Opis fizyczny: Bibliogr. 21 poz., rys.

Twórcy

autor

Klimaschewski Sven F.

• Faculty of Mechanical Engineering, CAE & Engineering Design, University of Applied Sciences Stralsund, Zur Schwedenschanze 15, Stralsund, 18435, Germany

autor

Raschke Robert

• Faculty of Mechanical Engineering, CAE & Engineering Design, University of Applied Sciences Stralsund, Zur Schwedenschanze 15, Stralsund, 18435, Germany

autor

Vehse Mark

• Faculty of Mechanical Engineering, CAE & Engineering Design, University of Applied Sciences Stralsund, Zur Schwedenschanze 15, Stralsund, 18435, Germany

Bibliografia

• 1. Skoog, S.A., Goering, P.L. & Narayan, R.J. (2014) Stereolithography in tissue engineering, J Mater Sci: Mater Med, Vol. 25, No. 3, pp. 845–856.
• 2. Cooke, M. N. (2003), et al., Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth, Journal of biomedical materials research. Part B, Applied biomaterials, Vol. 64, No. 2, pp. 65–69.
• 3. Vehse, M., Petersen, S. & Seitz, H. (2107) High resolution photo-polymerization technique for fabrication of hydrogel based scaffolds, Biomed. Eng.Biomed. Tech., Vol. 62, No. S1, p 212.
• 4. Vehse, M. & Seitz, H. (2014) (Micro-) Stereolithography based on Diode Laser Curing (DLC) and its Potential Applications in Tissue Engineering, BiomedTech, Vol. 59, No. S1, pp. 276-278.
• 5. Priola, A., et al., (1993) Properties of polymeric films obtained from uv cured poly (ethylene glycol) diacrylates, Polymer, Vol. 34, No. 17, pp. 3653–3657.
• 6. Kalakkunnath, S., et al. (2006), Viscoelastic characteristics of UV polymerized poly (ethylene glycol) diacrylate networks with varying extents of crosslinking, Journal of Polymer Science Part B: Polymer Physics, Vol. 44, No. 15, pp. 2058–2070.
• 7. Yu-an, J. et al. (2015) Additive Manufacturing of Custom Orthoses and Prostheses - A Review. Procedia CIRP, Vol. 36, pp. 199-204.
• 8. Mavroidis, C. et al. (2011), Patient specific ankle-foot orthoses using rapid Prototyping, Journal of NeuroEngineering and Rehabilitation, Vol. 8, No. 1 pp. 1-11.
• 9. Rogers, B. et al. (2007) Advanced Trans-Tibial Socket Fabrication Using Selective Laser Sintering, Prosthetics and Orthotics International, Vol. 31(1), pp. 88-100.
• 10. Kai C. C. (2000), et al., Facial prosthetic model fabrication using rapid prototyping tools, Integrated Manufacturing Systems, Vol. 11, No. 1, pp. 42-53.
• 11. Jacobs, P. F. (1992) Rapid Prototyping & Manufacturing - Fundamentals of Stereolithography, 1st ed., Society of Manufacturing Engineers, Ed. Michigan: Dearborn, 5. Print.
• 12. Kruth, J-P. et al. (2005) Binding mechanisms in selective laser sintering, Rapid Prototyping Journal, Vol. 11, No. 1, pp. 26-36.
• 13. L. Muraru, L. et al. (2010) SLS nylon 12 characterization through tensile testing and digital image correlation for finite element modelling of foot and ankle-foot orthoses, 21st Solid Freeform Fabrication Symposium, Austin, TX, USA, pp. 828-833.
• 14. Kozlovsky, K. et al. (2018), Mechanical Properties of Reused Nylon Feedstock for Powder-bed Additive Manufacturing in Orthopedics, Procedia Manufacturing, Volume 26, pp. 826-833
• 15. Nelson, JA, et al. (2014), Effects of scan direction and orientation on mechanical properties of laser sintered polyamide-12, International Journal of Advanced Design and Manufacturing Technology, Vol. 7, No. 3, pp. 19-25.
• 16. B. Mellott, M., Searcy, K. & Pishko, M. (2001) Release of protein from highly cross-linked hydrogels of poly(ethylene glycol) diacrylate fabricated by UV polymerization. Biomaterials, Vol. 22, pp. 929-941.
• 17. Wang, J., et al. (2016), Stereolithographic (SLA) 3D printing of oral modified-release dosage forms, International journal of pharmaceutics, Vol. 503, No. 12, pp. 207–212.
• 18. Rekowska, N., et al. (2008), Thermomechanical properties of PEGDA and its co-polymers, Current Directions in Biomedical Engineering, Vol. 4, No.1, pp. 669-672.
• 19. Gutsfeld, P. et al. (2016) Orthesen in der Unfallchirurgie. Trauma und Berufskrankheit, Vol. 18, No. 2, pp.116124.
• 20. Specht, J., Schmitt, M. & Pfeil, J. (2008) Technische Orthopädie – Orthesen und Schutzeinrichtungen, p. 95 Springer-Verlag Berlin Heidelberg.
• 21. Tosheva, Y. E. et al. (2005); Reverse engineering and rapid prototyping for new orthotic devices, Intelligent Production Machine and System - The 1st Virtual International Conference on Intelligent Production Machines and Systems, pp. 567-572.