PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Komputerowe wspomaganie metody spektroskopii impedancji. Cz. 1 - charakterystyka problemu badawczego

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Computer-aided impedance spectroscopy. Part 1. – characteristics of the research problem
Języki publikacji
PL
Abstrakty
PL
Przedstawiono problem badawczy i podstawy teoretyczne niskoczęstotliwościowej spektroskopii impedancji oraz przesłanki jej zastosowania do diagnozowania paramagnetycznych i ferromagnetycznych stopów używanych w transporcie. Główną uwagę zwrócono na modelowanie metalu i postępującej jego degradacją przy pomocy obwodu zastępczego RLC.
EN
In the article theoretical bases of the low frequency impedance spectroscopy method and possibilities of its use in the diagnostics of paramagnetic and ferromagnetic alloys used in transport are explained. The main attention is put on modelling metal ant its degradation by equivalent RLC circuit.
Rocznik
Strony
1657--1663, CD
Opis fizyczny
Bibliogr. 26 poz., rys.
Twórcy
autor
  • Instytut Techniczny Wojsk Lotniczych, Zakład Informatycznego Wsparcia Logistyki
autor
  • Politechnika Śląska, Wydział Transportu, Katedra Budowy Pojazdów Samochodowych
Bibliografia
  • 1. http://www.ndt.net
  • 2. Dobrzański J., Materiałoznawcza interpretacja trwałości stali dla energetyki. Open Access Library, 2011, t. 3, 228 s., http://www.openaccesslibrary.com/vol03/vol03.pdf
  • 3. Nabarro F. R. N., Dislocations in a Simple Cubic Lattice. Proc. Phys. Soc. 59(2), 1947, 256-272.
  • 4. Shaniavski A.A., Modeling of fatigue cracking of metals. Synergetics for aviation. Publishing House of Scientific and Technical Literature “Monography”, Ufa 2007, (ros.).
  • 5. Vilysa J., Kvedarasb V., Dislocation Structure of Near Surface Layers of Deformed Low-carbon Steel. 15th Int. Metallurgical & Material Conference METAL 2006 , 23.- 25.5.2006, Hradec nad Moravicí.
  • 6. Kroos J. et al., Combined measuring system for an improved non-destructive determination of the mechanical/technological material properties of steel sheet. Technical steel research. Final report EUR 21339 EN, Publication Office of the Europe-an Union, Luxmbourg 2005.
  • 7. Leunis E. et al., Quantitative phase analysis of multi-phase steels – PHAST. Final report EU 22387 EN, Publication Office of the European Union, Luxmbourg 2006.
  • 8. Stolzenberg M. et al., Online material characterization at strip production. Research Found of Coal and Steel. Final report EUR 25879 EN, Publications Office of the European Union, Luxmbourg 2013, doi: 10.2777/77313.
  • 9. Keysight Technologies, Impedance Measurement Handbook. A guide to measurement technology and techniques, 4th Edi-tion, Keysight Technologies, 2014, http://www.keysight.com.
  • 10. Żurek Z. H., Duka P., RLC circuits for material testing and NDT, Institute of Electrical Drives and Machines KOMEL, Katowice 2015.
  • 11. Zurek Z. H., Application of flaw detection methods for detection of fatigue prosses in low-alloyed steel, http://www.ndt.net/article/ENDTdays2007/nde_for_safety/36.pdf.
  • 12. Hofmann U. et al.: Non-destructive evaluation (NDE) of quality characteristics of heavy plates. Final report EUR 21436 EN. Publication Office of the European Union, Luxmbourg 2005.
  • 13. Praca zbiorowa pod red. Zieliński W., Rajcy A., Metody spektroskopowe i ich zastosowanie do identyfikacji związków organicznych. WNT Warszawa 2000.
  • 14. Eddy Current Testing at Level 2: Manual for the Syllabi Contained in IAEA-TECDOC-628. Rev. 2 "Training Guidelines for Non Destructive Testing Techniques", Printed by the IAEA in Austria, February 2011.
  • 15. Hornsch A., Automatic identification of induction hardening using eddy current and Preventive Multi-Frequency Testing, http://www.ibgndt.ch/wp-content/uploads/2014/10/ibg_white-paper_automatic-verification-induction-hardening-by-EC-and-PMFT.pdf
  • 16. Abu-Nabah B. A., Nagy P. B., High-frequency eddy current conductivity spectroscopy for residual stress profiling in sur-face-treated nickel-base superalloys. NDT & E International, Volume 40, Issue 5, pp. 405 – 418, July 2007.
  • 17. Heuer H., Hillmann S. , Klein M. and Meyendorf N., Sub Surface Material Characterization using High Frequency Eddy Current Spectroscopy. MRS Proceedings, (2009) 1195, 1195-B09-02 doi:10.1557/PROC-1195-B09-02.
  • 18. Pitropakis I, Pfeiffer H. Wevers M., Crack detection in aluminum plates for aerospace applications by electromagnetic im-pedance spectroscopy using flat coil sensors. Sensors and Actuators A: Physical Volume 176, April 2012, pp. 57–63, doi:10.1016/j.sna.2012.01.013.
  • 19. Newnham R., Properties of materials. Anisotropy, symmetry, structure. Oxford University Press, 2005.
  • 20. Engineering Design Handbook - Electromagnetic Compatibility (DARCOM P 706-410). U.S. Army Material Command, March 1977.
  • 21. Jarvis J. B. et al., Measuring the Permittivity and Permeability of Lossy Materials: Solids, Liquids, Metals, Building Materials, and Negative-Index Materials. NIST Technical Note 1536, February 2005.
  • 22. Witos M., Increasing the durability of turbine engine components through active diagnostics and control. Research works of AFIT, 2011, Issue 29, 324 p. (pol.), doi: 10.13140/RG.2.1. 4341.4560.
  • 23. Tanner D. B., Optical effects in solids. Lecture notes for PHY7097, Department of Physics, University of Florida.
  • 24. Green L., RF-inductor modeling for the 21st century, http://m.eet.com/media/1142818/19256-159688.pdf
  • 25. Dobrzański J., Sposób szacowanie czasu dalszej bezpiecznej pracy materiałów pracujących w warunkach pełzania na przykładzie charakterystyk materiałowych stali 10CrMo9-10 po długotrwałej eksploatacji. XIV Konferencja Naukowo-Techniczna Projektowanie, Innowacje Remontowe i Modernizacje w Energetyce PIRE 2012, Ustroń 28-30.11. 2012.
  • 26. Duff W.G., Designing Electronic System for EMC. SciTech Publishing, 2011.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-bab2609f-4497-4671-85d8-a6e695516392
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.