Effect of the oxidation on the tribological behaviour of steels

• Autorzy: Djilali K.-A. , Hebbar A.
• Języki publikacji: EN

Abstrakty

EN

The work presented in this study focus on the application of the method of the plans of experiences (MPE) to the study and the optimization of the quantification of the wear of the steels (XC48, A60) under the effect of a factor of environment in the occurrence Hydrogen. Modeling can draw inspiration from the mathematical models established by the (MPE) in order to analyze more deeply the phenomenon of the wear while taking account of the various relevant factors [1]. The MPE, introduced is a consistent set of tools and methods algèbro-statistics to establish and analyze the relationships in the quantities studied (responses) and their sources of variations (factors) [2]. This analysis may be qualitative: study of “screening" (determination of influential factors) or quantitative: methodology of the surfaces of answers (variation of responses according to the influential factors). In all cases, it has for the purpose of determination of mathematical models approached the answers expressed in terms of the factors. These models are deducted from the values obtained of series of experiments. The definition of these plans of experiences determines the measurable quality of models. The multiple facets of the MPE are then used as the basis for the development of strategy to optimize [3].

Słowa kluczowe

EN

experimental design method; screening analysis; response surface methodology; optimisation; distributed calculations; wear; oxygen

PL

doświadczalna metoda projektowania; analiza przesiewowa; metoda powierzchni odpowiedzi; optymalizacja; obliczenia rozproszone; zużycie; tlen

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2018
• Tom: Vol. 22, nr 4
• Strony: 1247--1260
• Opis fizyczny: Bibliogr. 19 poz., wykr.

Twórcy

autor

Djilali K.-A.

• Laboratory of Industrial Engineering and Sustainable Development, Department of Mechanic / Centre Universitaire de Relizane, Bormadia 48000, Algeria

autor

Hebbar A.

• Université Ibn Badis de Mostaganem, 27000-Algeria

Bibliografia

• [1] Caubet, J.J.: Théorie et pratique industrielle du frottement, Paris, Dunod-Technip, 1964.
• [2] Bowden, F.P., Tabor, D.: The Friction and Lubrication of Solids, vol. I and II, Clarendon Press, Oxford, 1950-1954.
• [3] Armbruster, M.: Le Contrôle qualité et la Tribologie, in: Revue Pratique du Contrôle Industriel, 131, 28-34, 1985.
• [4] Godet, M.: Les fondements mécaniques de la tribologie, in: Mécanique Matériaux Électricité, 1972.
• [5] d'Agraives, B.C.: Présentation d'un programme d'étude comparative sur les mesures du coeffcient de frottement, in: Revue française de mécanique, 6, 31-42, 1978.
• [6] Georges, J.M.: Frottement, Usure et Lubrification (La Tribologie ou Sciences des Surfaces), CNRS Editions, 2000.
• [7] Bowden, F.P., Tabor, D.: Friction et lubrification, Paris, Dunod, 1956.
• [8] Lim, L.C. and Ashby, M.F.: Acta Metall., 35, 1-24, 1987.
• [9] Carslaw H.S, Jeager J.C.: Heat Conduction in Solids, Oxford University Press, London, 1979.
• [10] Kragelsky, I.V.: Le calcul de l'usure, in: Mécanique, Matériaux, Électricité, 265(1), 39-45, 1972.
• [11] Myers, R.H., Montgomery, D.C., Vining, G.G., Robinson, T.J.: Generalized linear models: with applications in engineering and the sciences, Hoboken, Wiley, 2010.
• [12] Box, G.E.P. and Wilson, K.B.: On the experimental attainment of optimum conditions, Journal of the Royal Statistical Society, XIII(1), 1-45, 1951.
• [13] Hax, A.C. and Candea, D.: Production and Operations Management, Prentice-Hall, Englewood Cliffs, N.J., 1984.
• [14] Mankiewicz, R.: The Story of Mathematics, Princeton, NJ, Princeton University Press, 2004.
• [15] Cochran, W.G.: The distribution of the largest of a set of estimated variances as a fraction of their total, Annals of Human Genetics (London), 11(1), 47-52, 1941.
• [16] Massart, D.L., Vandeginste, B.G.M., Buydens, L.M.C., de Jong, S., Lewi, P.J., Smeyers-Verbeke, J.: Handbook of Chemometrics and Qualimetrics: Part A, Elsevier, Amsterdam, The Netherlands, 1997.
• [17] Horwitz, W.: Harmonized protocol for the design and interpretation of collaborative studies, Trends in Analytical Chemistry, 7(4), 118-120, 1988.
• [18] Konieczka, P., Namieśnik, J.: Quality Assurance and Quality Control in the Analytical Chemical Laboratory, A Practical Approach, CRC Press, Boca Raton, Florida, 2009.
• [19] Taylor, J.K.: Quality Assurance of Chemical Measurements, 4th printing, Lewis Publishers, Chelsea, Michigan, 1988.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).