Analysis of the Hard-Faced Multi-Phase Material Wear Process by the Ball-Cratering Method

• Autorzy: Ligier Krzysztof , Napiórkowski Jerzy , Lemecha Magdalena

Identyfikatory

DOI

10.5604/01.3001.0016.1034

Warianty tytułu

PL

Analiza procesu zużywania napawanych materiałów wielofazowych metodą ball-cratering

• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of tribological testing performed on multi-phase layers produced by the hard-facing method. Three materials based on Fe-C-Cr alloys and containing carbide-forming elements B, V, Nb, Mn, Mo and W, used to hard-face abrasion-resistant layers, were selected for the study. The ball- cratering method performed the tests in two variants: with or without an abrasive slurry. The obtained results demonstrated that all test materials showed similar wear intensity in the presence of abrasive slurry, while the wear intensity varied for the test with no abrasive slurry.

PL

W pracy przedstawiono wyniki badań tribologicznych warstw wielofazowych wykonanych metodą napawania. Do badań wybrano trzy materiały na bazie stopów Fe-C-Cr zawierających pierwiastki węglikotwórcze B, V, Nb, Mn, Mo i W, stosowane do napawania warstw odpornych na ścieranie. Badania przeprowadzono metodą ball-cratering w dwóch wariantach: z obecnością zawiesiny ściernej i bez zawiesiny ściernej. Uzyskane wyniki wykazały, że w obecności zawiesiny ściernej wszystkie badane materiały charakteryzowały się podobną intensywnością zużywania, natomiast w badaniu bez zawiesiny ściernej intensywność zużycia była zróżnicowana.

Słowa kluczowe

EN

abrasive wear; hard-faced multi-phase layers; ball-cratering method

PL

zużycie ścierne; wielofazowe warstwy napawane; metoda ball-cratering

• Wydawca: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
• Czasopismo: Tribologia
• Rocznik: 2022
• Tom: nr 3
• Strony: 59--67
• Opis fizyczny: Bibliogr. 23 poz., rys., tab., wykr.

Twórcy

autor

Ligier Krzysztof

• University of Warmia and Mazury in Olsztyn, Faculty of Technical Sciences, Oczapowskiego 11 Street, 10-719 Olsztyn, Poland

• https://orcid.org/0000-0003-1348-7068

autor

Napiórkowski Jerzy

• University of Warmia and Mazury in Olsztyn, Faculty of Technical Sciences, Oczapowskiego 11 Street, 10-719 Olsztyn, Poland

• https://orcid.org/0000-0003-2953-7402

autor

Lemecha Magdalena

• University of Warmia and Mazury in Olsztyn, Faculty of Technical Sciences, Oczapowskiego 11 Street, 10-719 Olsztyn, Poland

• https://orcid.org/0000-0003-3414-4099

Bibliografia

• 1. Ligier K., Napiórkowski J., Lemecha M.: The Effect Of Abrasive Mass Moisture Content On The Abrasion-Resistant Steel Wear Rate. Quarterly Tribologia 2019, 284 (2), pp. 75–82.
• 2. Napiórkowski J., Ligier K.: Tribological Properties Of Polyurethanes In Abrasive Soil Mass. Tribologia 276(6), pp. 65–70.
• 3. Alavi Gharahbagh E., Rostami J., Palomino A.M.: New Soil Abrasion Testing Method For Soft Ground Tunneling Applications. Tunnelling and Underground Space Technology, Vol. 26, Issue 5, pp. 604–613.
• 4. Napiórkowski J., Lemecha M.: An Analysis Of The Wear Of Ploughshares With Various Technological Solution. Quarterly Tribologia 2016, 267 (3), pp. 139–151.
• 5. Stachowiak G.B., Stachowiak G.W., Celliers O.: Ball-Cratering Abrasion Tests of High-Cr White Cast Irons, Tribol. Int., 2005, 38, pp. 1076–1087.
• 6. Mathew M.T., Stack M.M., Matijevic B., Rocha L.A., Ariza E.: Micro-Abrasion Resistance of Thermochemically Treated Steels in Aqueous Solutions: Mechanisms, Maps, Materials Selection, Tribol. Int., 2008, 41, pp. 141–149.
• 7. Marques F., da Silva W.M., Pardal J.M., Tavares S.S.M., and Scandian C., Influence of Heat Treatments on the Micro-Abrasion Wear Resistance of a Superduplex Stainless Steel, Wear, 2011, 271, pp. 1288–1294.
• 8. Vale Antunes P., Ramalho A.: Study of Abrasive Resistance of Composites for Dental Restoration by Ball-Cratering, Wear 2003, 255, pp. 990–998.
• 9. Stachowiak G.B., Stachowiak G.W.: Tribological Characteristics of WC-Based Claddings Using a Ball-Cratering Method, Int. J. Refract. Met. H. 2010, 28, pp. 95–105.
• 10. Sharifi S., Stack M.M., Stephen L., Wang-Long Li, Moo-Chin Wang: Micro-Abrasion of Y-TZP in Tea, Wear 2013, 297, pp. 713–721.
• 11. Ibanez M.J., Gilabert J., Vicent M., Gomez P., and Munoz D.: Determination of the Wear Resistance of Traditional Ceramic Materials by Means of Micro-Abrasion Technique, Wear 2009, 267, pp. 2048–2054.
• 12. Sampaio M., Buciumeanu M., Henriques B., Silva F. S., Souza J.C.M., Gomes J.R.: Comparison Between PEEK and Ti6Al4V Concerning Micro-Scale Abrasion Wear on Dental Applications, J. Mech. Behav. Biomed. Mater. 2016, 60, pp. 212–219.
• 13. Farfan-Cabrera L.I., Gallardo-Hernandez E.A., Sedano de la Rosa C., Vite-Torres M.: Micro-Scale Abrasive Wear of Some Sealing Elastomers, Wear 2017, 376–377, pp. 1347–1355.
• 14. Ligier K., Olejniczak K., Napiórkowski J.: Wear of polyethylene and polyurethane elastomers used for components working in natural abrasive environments, Polymer Testing, Volume 100, 2021, 107247.
• 15. Batista J., Joseph M., Godoy C., Matthews A.: Micro-Abrasion Wear Testing of PVD TiN Coatings on Untreated and Plasma Nitrided AISI, H13 Steel, Wear 2002, 249, pp. 971–979.
• 16. Silva F., Martinho R., Baptista A.: Characterisation of Laboratory and Industrial CrN/CrCN/Diamond-Like Carbon Coatings, Thin Solid Films, 2014, 550, pp. 278–284.
• 17. Osuch-Słomka E., Michalczewski R., Szczerek M.: Ocena odporności na zużywanie powłok PVD/CVD metodą ball-cratering. Tribologia 2007, pp. 213–214 (3–4), pp. 47–58.
• 18. Napiórkowski J., Ligier K., Lemecha M., Fabisiak D.: Evaluation of tribological properties of powder paint coatings using the ball-cratering method. Quarterly Tribologia 2019, 288 (6), pp. 57–63.
• 19. Gee M.G. and Wicks M.J.: Ball Crater Testing for the Measurement of the Unlubricated Sliding Wear of Wear-Resistant Coatings, Surf. Coat. Technol. 2000, 133–134, pp. 376–382.
• 20. Cozza R.C.: Influence of the Normal Force, Abrasive Slurry Concentration and Abrasive Wear Modes on the Coefficient of Friction in Ball-Cratering Wear Tests, Tribol. Int. 2014, 70, pp. 52–62.
• 21. Peng Y. Ni X., Zhu Z., Yu Z., Yin Z., Li T., Liu S., Zhao L., Xu J.: Friction and Wear of Liner and Grinding Ball in Iron Ore Ball Mill, Tribol. Int. 2017, 115, pp. 506–517.
• 22. Bello J., Wood R., Wharton J.: Synergistic Effect of Micro-Abrasion-Corrosion of UNS S30403, S31603 and S32760 Stainless Steels, Wear 2007, 263, pp. 149–159.
• 23. Stack M., Rodling J., Mathew M., Jawan H., Huang W., Parck G., Hodge C.: Micro-Abrasion Corrosion of a Co-Cr/UHMWPE Couple in Ringer’s Solution: An Approach to Construction of Mechanism and Synergism Maps for Application to Bio-Implants, Wear, 2010, 269, pp. 376–382.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).