Identyfikatory
Warianty tytułu
Konferencja
Computer Applications in Electrical Engineering (23-24.04.2018 ; Poznań, Polska)
Języki publikacji
Abstrakty
The paper presents an algorithm for calculation of eddy current power losses caused by macroscopic eddy currents in ferromagnetic materials considering non-linearity of magnetization characteristics and magnetic hysteresis. The results of calculations are presented for a typical non-oriented steel sheet with silicon content of 6.5%. It has been found that inclusion of hysteresis loop and non-linearity of magnetization for the analyzed material has little effect on the calculated eddy current losses. Restrictions on the use of the algorithm are primarily due to the assumption of average values of the flux in the cross section of the sample, numerical problems when converting B → H and H → B for large increases in the induction, and the lack of regularity of the shape of the hysteresis loop measurements.
Słowa kluczowe
Rocznik
Tom
Strony
205--214
Opis fizyczny
Bibliogr. 8 poz., rys.
Twórcy
autor
- Czestochowa University of Technology
autor
- Czestochowa University of Technology
Bibliografia
- [1] Krings A., Soulard J., Overview and comparison of iron loss models for electrical machines, in Proceedings of International Conference on Ecological Vehicles and Renewable Energies EVER 2010, March 25-28 2010, Monaco, abridged version published in Journal of Electrical Engineering (ISSN 1582-4594) Vol. 10/2010 No. 3, paper 10.3.22.
- [2] C. Steinmetz: On the law of hysteresis (oryginał opublikowany in 1892), Proceeding of the IEE, vol. 72/2010 no. 2, pp. 197-221, 1984.
- [3] Barranger J., Hysteresis and eddy-current losses of transformer lamination viewied as an apllication of the Pointing Theorem, NASA Technical Note, D-3114, 1965.
- [4] Bertotti G., Some considerations on the physical interpretation of eddy current losses in ferromagnetic materials, J. Magn. Mater. 1986, vol. 54-57, pp. 1556-1560.
- [5] Zirka S.E., Moroz Y.I., Marketos P., Moses A.J., Loss separation in nonoriented electrical steels, IEE Trans. Magn. 2010, vol. 46, pp. 286-289.
- [6] Bereźnicki M., The influence of skin effect on the accuracy of eddy current Energy loss calculation in electrical steel sheets, IEEE, Selected Problems of Electrical Engineering and Electronics (WZEE), 2015, 17-19 Sept. 2015.
- [7] Górecki J., Nowak L., Poltz J., Numerical calculation of eddy current losses in conductive ferromagnetic plate, Electrical hearings in 1976, 22, z. 3, pp. 677-685.
- [8] G. Bertotti, Hysteresis in magnetism, Academic Press, San Diego (1998).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-b926d265-a682-4181-8553-5b57c848bd30