Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Main aim of submitted work is evaluation and experimental verification of inoculation effect on Al alloys hot-tear sensitivity. Submitted work consists of two parts. The first part introduces the reader to the hot tearing in general and provides theoretical analysis of hot tearing phenomenon. The second part describes strontium effect on hot tearing susceptibility, and gives the results on hot tearing for various aluminium alloys. During the test, the effect of alloy chemical composition on hot tearing susceptibility was also analyzed. Two different Al-based alloys were examined. Conclusions deals with effect of strontium on hot tearing susceptibility and confirms that main objective was achieved.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
1837--1842
Opis fizyczny
Bibliogr. 5 poz., fot., rys., tab.
Twórcy
autor
- University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Žilina, Slovakia
autor
- University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Žilina, Slovakia
autor
- University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Žilina, Slovakia
autor
- AGH University Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Str., 30-059 Krakow, Poland
Bibliografia
- [1] D. Bolibruchova, J. Macko, M. Bruna, Elimination of negative effect of Fe in secondary alloys AlSi6Cu4 (EN AC 45 000, A 319) by nickel, Archives of Metallurgy and Materials 59 (2), 717-721 (2014).
- [2] S. Lin, A Study of Hot Tearing in Wrought Aluminum alloys, Universitè du Quebec – Chicoutimi (1999).
- [3] Q. Wu, Study of Hot Tearing in Cast and Wrought Aluminum Alloys. [online] Worcester polytechnic institute, 44 (2012).
- [4] G. Eskin, D. Suyitno, L. Katgerman, Contraction of aluminium alloys during and after solidification, Progr. Mater. Sci. 49, 629-711 (2004).
- [5] T. W. Clyne, G. J. Davies, Solidification and Casting of Metals, Metals Society, London, 275-278 (1979).
Uwagi
EN
The authors thank VEGA SR for the financial support of this work, which is related to the solution of the grant assignment VEGA 1/0494/17.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-b8d5a7da-5403-4b99-bb68-05c2a40242dd