Manufacturing of Porous Ceramic Preforms Based on Halloysite Nanotubes (Hnts)

• Autorzy: Kujawa M. , Dobrzański L. A. , Matula G. , Kremzer M. , Tomiczek B.

Identyfikatory

DOI

10.1515/amm-2016-0155

• Języki publikacji: EN

Abstrakty

EN

The aim of this study was to determine the influence of manufacturing conditions on the structure and properties of porous halloysite preforms, which during pressure infiltration were soaked with a liquid alloy to obtain a metal matrix composite reinforced by ceramic, and also to find innovative possibilities for the application of mineral nanotubes obtained from halloysite. The method of manufacturing porous ceramic preforms (based on halloysite nanotubes) as semi-finished products that are applicable to modern infiltrated metal matrix composites was shown. The ceramic preforms were manufactured by sintering of halloysite nanotubes (HNT), Natural Nano Company (USA), with the addition of pores and canals forming agent in the form of carbon fibres (Sigrafil C10 M250 UNS SGL Group, the Carbon Company). The resulting porous ceramic skeletons, suggest innovative application capabilities mineral nanotubes obtained from halloysite.

Słowa kluczowe

EN

metal matrix composites (MMC); halloysite nanotubes; porous ceramic preforms

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 917--922
• Opis fizyczny: Bibliogr. 18 poz., rys., tab., wykr.

Twórcy

autor

Kujawa M.

• Institute of Engineering Materials And Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18a Konarskiego Str, 44-100 Gliwice, Poland

autor

Dobrzański L. A.

• Institute of Engineering Materials And Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18a Konarskiego Str, 44-100 Gliwice, Poland

autor

Matula G.

• Institute of Engineering Materials And Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18a Konarskiego Str, 44-100 Gliwice, Poland

autor

Kremzer M.

• Institute of Engineering Materials And Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18a Konarskiego Str, 44-100 Gliwice, Poland

autor

Tomiczek B.

• Institute of Engineering Materials And Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18a Konarskiego Str, 44-100 Gliwice, Poland

Bibliografia

• [1] K. K. Chawla, Composite materials, Science and Engineering, New York 2012.
• [2] A. Hai, C. San Marchi, A. Mortensen, Metal matrix composites in industry: An introduction and a survey, New York 2003.
• [3] A. E. Tomiczek, R. Mech, L. A. Dobrzański, Variantion of magnetomechanical properties in giant magnetostrictive composite materials, Polym. Compos. (2015), DOI: 10.1002/pc.23640 (in press).
• [4] L. Rongqi, P. Fang, G. Junwei, Y. Xiaozhi, L. Shenzhuo, Z. Wenkai, Z. Xiaoling, Pressure infiltration of boron nitride preforms with molten aluminum for low density heat sink materials, J. Mater. Sci-Mater. El. 24, (4), 1175-1180 (2013).
• [5] W. Yu, J. K. Yu, Silicon dissolution and interfacial characteristics in Si/Al composites fabricated by gas pressure infiltration, Mater. Chem. Phys. 139, (2-3), 783-788 (2013).
• [6] Y. Wang, H. Liu, H. Cheng, J. Wang, Densification behavior and microstructure of mullite obtained from diphasic Al2O3-SiO2 gels, Ceram. Int. 40, (8), 12789-12796 (2014).
• [7] J. Luyten, S. Mullens, J. Cooymans, A. M. De Wilde, I. Thijs, R. Kemps, Different methods to synthesize ceramic foams, J. Eur. Ceram. Soc. 29, (5), 829-832 (2009).
• [8] E. C. Hammel, O. L.-R. Ighodaro, O.I. Okoli, Processing and properties of advanced porous ceramics: An application based review, Ceram. Int. 40, (10), 15351-15370 (2014).
• [9] B. Tomiczek, M. Kujawa, G. Matula, M. Kremzer, T. Tański, L. A. Dobrzański, Aluminium AlSi12 alloy matrix composites reinforced by mullite porous preforms, Materialwiss. Werkst. 46, (4-5), 368-376 (2015).
• [10] A. Mattern, B. Huchler, D. Staudenecker, R. Oberacker, A. Nagel, M. J. Hoffmann, Preparation of interpenetrating ceramic-metal composites, J. Eur. Ceram. Soc. 24, (12), 3399-3408 (2004).
• [11] P. Yuana, D. Tanb, F. Annabi-Bergayac, Properties and applications of halloysite nanotubes: recent research advances and future prospects, Appl. Clay. Sci. 112-113, 75-93 (2015).
• [12] D. Rawtani, Y. K. Agrawal, Multifarious applications of halloysite nanotubes, a review, Rev. Adv. Mater. Sci. 30, 282-295 (2012).
• [13] R. Kamble, M. Ghag, S. Gaikawad, B. Kumar Panda, Halloysite nanotubes and applications, a review, Adv. Sci. Res. 3, (2), 25-29 (2012).
• [14] B. Lecouvet, M. Sclavons, S. Bourbigot, C. Bailly, Thermal and flammability properties of polyethersulfone/halloysite nanocomposites prepared by melt compounding, Polym. Degrad. Stabil. 98, (10), 1993-2004 (2013)
• [15] B. Tomiczek, M. Pawlyta, M. Adamiak, L. A. Dobrzański, Effect of milling time on crystallite size and microstructure of AA6061 composites fabricated via mechanical alloying, Arch. Metall. Mater. 60, (2), 789-793 (2015).
• [16] L. A. Dobrzański, M. Kremzer, K. Gołombek, Structure and Properties of Aluminum Matrix Composites Reinforced by Al2O3 Particles, Mater. Sci. Forum. 591, 188-192 (2008).
• [17] M. Pawlyta, B. Tomiczek, L. A. Dobrzański, M. Kujawa, B. Bierska- Piech, Transmission electron microscopy observations on phase transformations during aluminum/mullite composites formation by gas pressure infiltration, Mater. Charact. 114, 9-17 (2016).
• [18] M. Król, P. Snopiński, B. Tomiczek, T. Tański, W. Pakieła, W. Sitek, Structure and properties of the Al alloy in as-cast state and after laser treatment, P. Est. Acad. Sci. 65/2 107-116 (2016).

Uwagi

EN

The project was financed by the National Science Centre grant according to theDEC-2011/03/B/ST8/06076 decision number

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę