Influence of the Mould Cooling Process on the Quality and Properties of Aluminium Alloy

• Autorzy: Weiss V. , Svobodova J.
• Języki publikacji: EN

Abstrakty

EN

The article deals with the effect on the quality of casting moulds (metal, bentonite mixture) on the structure of the alloy AlZn5,5MgCu and selected mechanical properties of the alloy. The effect of foundry moulds can significantly affect formation and range of crystal segregation and the subsequent thermal process of homogenization which has an influence on the final quality of the alloy. The research focuses on the formation and range of crystal segregation and its removal with homogenization annealing, in which the observed influence of individual factors influencing the diffusion process and quality of the aluminium alloy.

Słowa kluczowe

EN

cooling process; quality; aluminium alloy; casting moulds

PL

proces chłodzenia; jakość; stop aluminium; formy odlewnicze

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2014
• Tom: Vol. 5, No. 4
• Strony: 36--41
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Weiss V.

• Faculty of Production Technology and Management, University of J. E. Purkyně in Ústí nad Labem, Pasteurova 3334/7, Ústí nad Labem 400 01, Czech Republic, [phone]

autor

Svobodova J.

• Faculty of Production Technology and Management, University of J. E. Purkyně in Ústí nad Labem, Pasteurova 3334/7, Ústí nad Labem 400 01, Czech Republic, [phone]

Bibliografia

• 1. Michna Š., Lukáč I., Louda et al. 2007. Aluminium materials and technologies from A to Z. Printed by Adin, s.r.o., Prešov.
• 2. Michna Š., Nová I. 2008. Technologie a zpracování kovových material. Adin, s.r.o.,Prešov.
• 3. Lukáč I., Michna Š. 1999. Atlas struktur a vad u hliníku a jeho slitin. Deltaprint, Děčín.
• 4. Michna Š., Lukáč I., Očenášek V., Kořený R., Drápala J., Schneider H., Iškufová et al. 2005. Encyklopedie hliníku. Adin, Prešov.
• 5. Hurtalová L., Tillová E., Chalupová M., Farkašová M. 2014. Evaluation of Sb Effect onto Eutectic Si Changes and Mechanical Properties in an 4xxx Al Cast Alloys Series. Production Engineering Archives, Vol. 3, No. 2, p. 2-5.
• 6. Vajsová V. 2011. Optimization of homogenizing annealing for Al-Zn5,5-Mg2,5-Cu1,5 alloy. Metallurgist, Volume 54, Issue 9.
• 7. Romankiewicz R., Romankiewicz F. 2014. The Influence of Modification for Structure and Impact Resistance of Silumin AlSi11. Production Engineering Archives, Vol. 3, No. 2, p. 6-9.
• 8. Vajsová V., Michna Š. 2010. Optimization of AlZn5.5Mg2.5Cu1.5, Alloy Homogenizing Annealing. Metallofizika i noveishie tekhnologii, Volume 32, No.7.
• 9. Vajsova V., Michna Š. 2010. Optimalizace homogenizacniho žihani slitiny AlZn5,5Mg2,5Cu1,5. Strojirenska technologie XV, p. 6-11.
• 10. Náprstková N., Cais J. 2014. Machinability of modified AlSi7Mg0,3 alloy. Production Egineering Archives. Vol. 3(2), p.10-13.