Dual completion petroleum production engineering for several oil formations

• Autorzy: Ivanova T. N. , Korshunov A. I. , Koretckiy V. P.

Identyfikatory

DOI

10.1515/mspe-2018-0035

• Języki publikacji: EN

Abstrakty

EN

Cost-efficient, enabling technologies for keeping and increasing the reservoir recovery rate of oil-formations with high water cut of produced fluids and exhausted resource are really essential. One of the easiest but short-term ways to increase oil production and incomes at development of oil deposits is cost of development and capital cost reduction. Therefore, optimal choice and proper feasibility study on the facilities for multilayer oil fields development, especially at the late stage of reservoir working, is a crucial issue for now-day oil industry. Currently, the main oil pools do not reach the design point of coefficient of oil recovery. The basic feature of the late stage of reservoir working is the progressing man-made impact on productive reservoir because of water injection increasing for maintaining reservoir pressure. Hence cost-efficient, enabling technologies for keeping and increasing the reservoir recovery rate of oil-formations with high water cut of produced fluids and exhausted resource are really essential. To address the above concerns the dual completion petroleum production engineering was proposed. The intensity of dual completion of formation with of different permeability is determined by rational choice of each of them. The neglect of this principle results a disproportionately rate of highly permeable formations development for the time. In effect the permeability of the formations or their flow rate is decreasing. The problem is aggravated by lack of awareness of mechanics of layers' mutual interference in producers and injectors. Dual completion experience in Russian has shown, that success and efficiency of the technology in many respects depend on engineering support. One of the sufficient criteria for the choice of operational objects should be maximal involvement of oil-saturated layers by oil displacement from seams over the economic life of well producing oil. If it is about getting high rate of oil recovery for irregular formations there is no alternative to dual completion and production. The recommended dual completion petroleum production technology enables development several formations by single well at the time. The dual completion petroleum production technology has been more important than ever because it is right not only for formations but for thin layers with undeveloped remaining reserves.

Słowa kluczowe

EN

dual completion; wells; deposits; layouts; hydrocarbons

• Wydawca: STE GROUP
• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2018
• Tom: nr 4 (26)
• Strony: 217--221
• Opis fizyczny: Bibliogr. 25 poz., rys.

Twórcy

autor

Ivanova T. N.

• Tchaikovsky Branch “Perm National Research Polytechnic Institute” 617764, Lenin st., 73, Tchaikovsky, RUSSIA Federal State Budgetary Institution of Science “Udmurt Federal Research Center of the Ural Branch of the Russian Academy of Sciences“ 426067, T. Baramzinoy str., 34, Izhevsk, RUSSIA

autor

Korshunov A. I.

• Federal State Budgetary Institution of Science “Udmurt Federal Research Center of the Ural Branch of the Russian Academy of Sciences“ 426067, T. Baramzinoy str., 34, Izhevsk, RUSSIA

autor

Koretckiy V. P.

• Kalashnikov Izhevsk State Technical University, 426069, Studencheskaya St., d.7, Izhevsk, RUSSIA

Bibliografia

• [1] E.I. Bogomolny. Intensification of recovery of highly viscous oil from carbonate reservoirs of Udmurtia. Moscow-Izhevsk: Institute of Computer Science, 2003.
• [2] U.V. Zheltov, V.I. Kudinov and G.E. Malofeev. “Razrabotka slozhnopostroennyh mestorozhdeniy vyazkoy nefti v carbonathyh collectorah” [Development of oilfields of complex structure with high viscous oil in carbonate reservoirs]. Regular and Chaotic Dynamics, 2011, p. 327.
• [3] M.N. Baranov and T.N. Ivanova. “Employing dual completion technology and dual completion assemblies on oilfields of Udmurtia”. Natural and Technology Sciences, vol. 9, no. 99, pp. 32-37, 2016.
• [4] M.N. Baranov, N.G. Istomina, A.L. Gavrikov and T.N. Ivanova. “Optimization of oilfield development models”. Natural and Technology Sciences, vol. 10, no. 100, pp. 48-54, 2016.
• [5] Baranov M.N., Gavrikov A.L., Gubanov A.M., Drachuk V.R., Ziganshin F.H., Ivanova T.N. “On the improvement of the WEM technology at a late stage development of oil fields with hard-to-recover reserves”. In Modern technologies of oil and gas extraction. Prospects of development of mineral raw material, Izhevsk: UdSU, pp. 195-204, 2016.
• [6] M.N Baranov, O.A. Chikisheva and T.N. Ivanova. “Calculation economical efficiency of dual completion technology”. In Current socio-economic problems of modern times, Sarapul, Carton-Plus Publisher's House, pp. 30-34, 2016.
• [7] V.D. Lysenko. “Development of oil fields. Effective methods”. Monograph. Moscow, Nedra-Business Center, 2009. p. 552.
• [8] T.N. Ivanova, E.O. Emelyanov, D.N. Novokshonov and E.U. Vdovina. “Research of pump working capacity and identifying causes of its failures”. Сhemical and petroleum engineering, vol. 5, pp. 257-268, 2016.
• [9] M.D. Valeev, Y.V. Belousov and A.V. Kalugin. “Method of determination of oil inflow from layers at simultaneously-separate wells operation”. Oil Industry, vol. 2, pp. 28-35, 2006.
• [10] P. Božek and E. Pivarčiová. “Flexible manufacturing system with automatic control of product quality”. Strojarstvo, vol. 55, no. 3, pp. 211-221, 2013.
• [11] O.M. Garipov, V.A. Leonov and M.Z. Sharifov. “Technology and equipment for simultaneous-separate injection of water into several reservoirs by a single well”. Vestnik nedropolzovatelya HMAO, no 17, pp. 69-74, 2007.
• [12] R.H. Muslimov. Oil recovery: past, present, future. Kazan: FEN Publisher's House, 2012.
• [13] R.K. Nizaev, R.G. Ramazanov, R.T. Shakirova, V.Y. Kondakova and G.V. Aleksandrov. “Estimating efficiency of dual completion for development of the Bashkirian stage using geological and reservoir modelling”. Oil industry, no 7, pp. 29-31, 2010.
• [14] K.M. Garifov, N.G. Ibragimov and R.G.Zabbarov. “Dual completion technology development”. Oil and life, no 3, pp. 40-41, 2008.
• [15] P.Božek and E. Pivarčiová. “Registration of Holographic Images Based on Integral Transformation”. Computing and Informatics, vol. 31, no. 6, pp. 1369- 1383, 2012.
• [16] R.R. Gabdullov, P.I. Slivka, A.A. Agafonov and V.I. Nikishov. “Expirience of employing dual completion technology for multilayered oilfields in Rosneft oil company”. Engineering Practise, no 1, pp. 30-31, 2010.
• [17] H. Oberhaensli, K. Novotna, A. Piskova, S. Chabrillat, D.K. Nourgaliev and A.K. Kurbaniyazov. “Extraterrestrial iron in the Cretaceous-Danian sediments”. Izvestiya, Physics of the Solid Earth, vol. 47, no. 5, pp. 379-401, 2011.
• [18] V.A. Afanasyev. “Optimization of well assemblies and well pump equipment of dual completion”. Engineering Practice., no 2, p. 36, 2012.
• [19] A.I. Ipatov. “Monitoring and regulating of formations with employing dual completion and SMART WELL equipment”. Engineering practice, no 2, pp. 16-25, 2012.
• [20] V.N. Ivanovskiy. “Dual completion and lateral hole exploitation: modern technologies review and development prospects”. Engineering practice, no 2, pp. 4-15, 2012.
• [21] Y. Muslimov. “The projects of WEM in TNK-BP: at a low start”. Innovator, no 5, pp. 2-10, 2012.
• [22] Y.V. Zeigman, O.A. Gumerov, I.V. Generalov. Choice of equipment and operation processes of wells equipped with sucker rod pumps and electric submersible pumps. Ufa: USPTU, 2000.
• [23] M. Fabián, R. Boslai, P. Ižol, J. Janeková, J. Fabiánová, G. Fedorko and P. Božek. “Use of parametric 3D modelling – tying parameter values to spreadsheets at designing molds for plastic injection”. Manufacturing technology, vol. 15, no. 1, pp. 24-31, 2015.
• [24] J. Černecký, P. Božek, E. Pivarčiová. “A new system for measuring the Deflection of the beam with the support of digital holographic interferometry”. Journal of Electrical Engineering, vol. 66, no. 1, pp. 52-55, 2015.
• [25] M.N. Baranov, P. Božek, V. Prajová, T.N. Ivanova, D.N. Novokshonov and A.I. Korshunov. “Constructing and calculating of multistage sucker rod string according to reduced stress”. Acta Montanistica Slovaca, vol. 22, no. 2, pp. 107-115, 2017.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).