Experimental and modelling study of the grain refinement of Fe-30wt%Ni-Nb austenite model alloy subjected to severe plastic deformation process

• Autorzy: Svyetlichnyy D. S. , Majta J. , Kuziak R. , Muszka K.

Identyfikatory

DOI

10.1007/s43452-021-00178-7

• Języki publikacji: EN

Abstrakty

EN

This study addresses some aspects regarding a computer modelling based on three-dimensional Frontal Cellular Automata (FCA) for the simulation of ultrafine-grained (UFG) microstructure development in purpose-designed microalloyed austenite model alloy i.e. FCC structure. Proposed in the present study model is a step forward towards understanding the deformation and microstructure development mechanisms occurring during severe plastic deformation (SPD) processes with high accumulation of the plastic deformation effects in FCC structures. The analysed microalloyed austenite microstructures were developed due to SPD effects. Using the proposed computer model, based on three-dimensional FCA it has been shown that it is possible to predict some characteristics of the FCC microstructures such as the grain size and the distribution of the boundaries misorientation angle. These abilities were proved by the qualitative and quantitative comparisons of the modelling and SEM/EBSD results. The capabilities of the proposed model were tested using experimental results of the wire drawing processes. The paper presents the new original results of experimental studies of multi-staged MaxStrain technology with the microscopic investigation. Basing on data obtained from these studies, the dependencies of the evolution of grain structure and misorientation angle on the accumulative strain and cycle number were obtained in a form of approximation equations. The equations were implemented into the CA model, and MaxStrain technology was simulated. Comparison of the results obtained in experimental studies and simulations shows a satisfactory agreement. Industrial verification of the developed model as well shows a satisfactory agreement.

Słowa kluczowe

EN

austenite model alloy; cellular automata; ultrafine-grained microstructure; grain boundaries; severe plastic deformation

PL

austenit; mikrostruktura; odkształcenie plastyczne

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2021
• Tom: Vol. 21, no. 1
• Strony: 339--352
• Opis fizyczny: Bibliogr. 46 poz., rys., wykr.

Twórcy

autor

Svyetlichnyy D. S.

• AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Krakow, Poland

autor

Majta J.

• AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Krakow, Poland

autor

Kuziak R.

• Łukasiewicz Research Network, Institute for Ferrous Metallurgy, 12-14 K. Miarki St., 44-100 Gliwice, Poland

autor

Muszka K.

• AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Krakow, Poland

• https://orcid.org/0000-0001-8449-7795

Bibliografia

• [1] Altan BS, Miskioglu I, Purcek G, Mulyukov RR, Artan R. Severe plastic deformation: towards bulk production of nanostructured materials. New York: NOVA Science Publishers; 2006.
• [2] Zehtbauer MJ, Zhu YT. Bulk nanostructured materials. Weinheim: Wiley-VCH; 2009.
• [3] Majta J, Muszka K. Mechanical properties of ultrafine-grained HSLA and Ti-IF steels. Mater Sci Eng A. 2007;464:186–91.
• [4] Majta J, Muszka K. Modelling microstructure evolution and work hardening in conventional and ultrafine-grained microal-loyed steels. In: Lin J, Balint D, Pietrzyk M, editors. Microstructure evolution in metal forming processes. Oxsford: Wood-head Publishing Limited; 2012. p. 243–63.
• [5] Hodgson PD, Siciliano Jr F, Jonas JJ, Sellars CM. Modelling microstructural development during hot rolling. Met Forum. 1993;31:1072–81.
• [6] Siciliano F, Jonas JJ. Mathematical modeling of the hot strip rolling of microalloyed Nb, multiply-alloyed Cr-Mo, and plain C-Mn steels. Metall Mater Trans A. 2000;31:511–30.
• [7] Petryk H, Stupkiewicz S. A quantitative model of grain refinement and strain hardening during severe plastic deformation. Mater Sci Eng A. 2007;444:214–9.
• [8] Muszka K, Hodgson P, Majta J. A physical based modeling approach for the dynamic behavior of ultrafine grained structures. J Mater Process Technol. 2006;177:456–60.
• [9] Estrin Y, Vinoradov A. Extreme grain refinement by severe plastic deformation: a wealth of challenging science. Acta Mater. 2013;61:782–817.
• [10] Estrin Y, Vinogradov A. Modeling of severe plastic deformation: time-proven recipes and new results. In: Molodov DA, editor. Microstructural design of advanced engineering materials. Hoboken: Wiley; 2013.
• [11] Militzer M. Phase field modeling of microstructure evolution in steels. Curr Opin Solid State Mater Sci. 2011;15:106–15.
• [12] Steinbach I. Phase-field model for microstructure evolution at the mesoscopic scale. Annu Rev Mater Res. 2013;43:89–107.
• [13] Takaki T, Yamanaka A, Tomita Y. Phase-field modeling for dynamic recrystallization. In: Altenbach H, Matsuda T, Okumura D, editors. From creep damage mechanics to homogenization methods. Berlin: Springer International Publishing; 2015. p. 441–59.
• [14] Bernacki M, Logé RE, Coupez T. Level set framework for the finite-element modelling of recrystallization and grain growth in polycrystalline materials. Scr Mater. 2011;64:525–8.
• [15] Osher S, Fedkiw RP. Level set methods: an overview and some recent results. J Comput Phys. 2001;169:463–502.
• [16] Barrales Mora LA. 2D vertex modeling for the simulation of grain growth and related phenomena. Math Comput Simul. 2010;80:1411–27.
• [17] Mellbin Y, Hallberg H, Ristinmaa M. A combined crystal plasticity and graph-based vertex model of dynamic recrystallization at large deformations. Model Simul Mater Sci Eng. 2015;23:45011.
• [18] Fang B, Huang CZ, Liu HL, Xu CH, Sun S. Monte Carlo simulation of grain-microstructure evolution in two-phase ceramic tool materials. J Mater Process Technol. 2009;209:4568–72.
• [19] Hore S, Das SK, Banerjee S, Mukherjee S. Computational modelling of static recrystallization and two dimensional microstructure evolution during hot strip rolling of advanced high strength steel. J Manuf Process. 2015;17:78–87.
• [20] Burbelko A. Mezomodelling of solidification using a cellular automaton. AGH University of Science and Technology. Kra-kow, Poland; 2004.
• [21] Zhan X, Wei Y, Dong Z. Cellular automaton simulation of grain growth with different orientation angles during solidification process. J Mater Process Technol. 2008;208:1–8.
• [22] Dmytro SS. Modeling of macrostructure formation during the solidification by using frontal cellular automata. In: Salcido A (ed) Cellular automata-innovative modelling for science and engineering. Rijeka, Croatia: InTech; 2011. pp. 179–196. http://www.intechopen.com/books/cellularautomata-innovative-modelling-for-science-and-engineering/modeling-of-macrostructure-formation-duringthesolidification-by-using-frontal-cellular-automata.
• [23] Asadi P, Besharati Givi MK, Akbari M. Simulation of dynamic recrystallization process during friction stir welding of AZ91 magnesium alloy. Int J Adv Manuf Technol. 2016;83:301–11.
• [24] Chen F, Qi K, Cui Z, Lai X. Modeling the dynamic recrystallization in austenitic stainless steel using cellular automaton method. Comput Mater Sci. 2014;83:331–40.
• [25] Shen W, Zhang L, Zhang C, Xu Y, Shi X. Constitutive analysis of dynamic recrystallization and flow behavior of a medium carbon Nb-V microalloyed steel. J Mater Eng Perform. 2016;25:2065–73.
• [26] Majta J, Madej Ł, Svyetlichnyy DS, Perzyński K, Kwiecień M, Muszka K. Modeling of the inhomogeneity of grain refinement during combined metal forming process by finite element and cellular automata methods. Mater Sci Eng A. 2016;671:204–13.
• [27] Song KJ, Wei YH, Dong ZB, Zhan XH, Zheng WJ, Fang K. Numerical simulation of β to α phase transformation in heat affected zone during welding of TA15 alloy. Comput Mater Sci. 2013;72:93–100.
• [28] Yoshimoto C, Takaki T. Multiscale hot-working simulations using multi-phase-field and finite element dynamic recrystallization model. ISIJ Int. 2014;54:452–9.
• [29] Ding Y, Zhu Q, Le Q, Zhang Z, Bao L, Cui J. Analysis of temperature distribution in the hot plate rolling of Mg alloy by experiment and finite element method. J Mater Process Technol. 2015;225:286–94.
• [30] Chen WC, Ferguson D, Ferguson HS, Mishra RS, Jin Z. Development of ultrafine grained materials using the MAXStrain® technology. Mater Sci Forum. 2001;357–359:425–30.
• [31] Sakai T, Belyakov A, Kaibyshev R, Miura H, Jonas JJ. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions. Prog Mater Sci. 2014;60:130–207.
• [32] Petryk H, Stupkiewicz S, Kuziak R. Grain refinement and strain hardening in IF steel during multi-axis compression: experiment and modelling. J Mater Process Technol. 2008;204:255–63.
• [33] Aoyagi Y, Watanabe C, Kobayashi M, Todaka Y, Miura H. Crystal plasticity simulation on effect of heterogeneous-nano-structure induced by severe cold-rolling on mechanical properties of austenitic stainless steel. J Iron Steel Technol Instit Japan. 2019;105:140–9.
• [34] Wei PT, Zhou H, Liu HJ, Zhu CC, Wang W, Deng G. Investigation of grain refinement mechanism of nickel single crystal during high pressure torsion by crystal plasticity modeling. Mater. 2019;12:351.
• [35] Frydrych K. Simulations of grain refinement in various steels using the three-scale crystal plasticity model. Metal Mater Trans A. 2019;50A:4913–9.
• [36] Gronostajski Z, Pater Z, Madej L, Gontarz A, Lisiecki L, Lukaszek-Solek A, Luksza J, Mroz S, Muskalski Z, Muzykiewicz W, Pietrzyk M, Sliwa RE, Tomczak J, Wiewiorowska S, Winiarski G, Zasadzinski J, Ziolkiewicz S. Recent development trends in metal forming. Arch Civil Mech Eng. 2019;19:898–941.
• [37] Madej L. Digital/virtual microstructures in application to metals engineering-a review. Arch Civil Mech Eng. 2017;17:839–54.
• [38] Zhu HJ, Chen F, Zhang HM, Cui ZS. Review on modeling and simulation of microstructure evolution during dynamic recrystallization using cellular automaton method. Sci China-Technol Sci. 2020;63:357–96.
• [39] Zhang J, Xu X, Outeiro J, Liu HG, Zhao WH. Simulation of grain refinement induced by high-speed machining of OFHC copper using cellular automata method. J Manuf Sci Eng Trans ASME. 2020;142:091006.
• [40] Svyetlichnyy DS. Modeling of microstructure evolution in process with severe plastic deformation by cellular automata. Mater Sci Forum. 2010;638–642:2772–7.
• [41] Svyetlichnyy DS. Modeling of grain refinement by cellular automata. Comp Mater Sci. 2013;77:408–16.
• [42] Perig AV, Golodenko NN. Effect of workpiece viscosity on strain unevenness during equal channel angular extrusion: CFD 2D solution of Navier-Stokes equations for the physical variables flow velocities-punching pressure. Mater Res Exp. 2016;3:115301.
• [43] Perig AV, Golodenko NN. CFD 2D simulation of viscous flow during ECAE through a rectangular die with parallel slants. Int J Adv Manuf Technol. 2014;74:943–62.
• [44] Wu Y, Zong YP, Jin JF. Grain growth in a nanostructured AZ31 Mg alloy containing second phase particles studied by phase field simulations. Sci China Mater. 2016;59:355–62.
• [45] Svyetlichnyy DS. A three-dimensional frontal cellular automaton model for simulation of microstructure evolution-initial microstructure module. Modell Simul Mater Sci Eng. 2014;22:085001 (1085001-19).
• [46] Svyetlichnyy DS, Majta J, Muszka K. Three-dimensional frontal cellular automata modeling of the grain refinement during severe plastic deformation of microalloyed steel. Comp Mater Sci. 2015;102:159–66.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021)