Application of a double cross limiting method in a lime mixing and milling system

• Autorzy: Mikoś Z. , Jachimski M. , Wróbel G. , Hayduk G.

Identyfikatory

DOI

10.24425/118987

• Języki publikacji: EN

Abstrakty

EN

The article presents the adaptation of the setpoint calculation algorithm with limitation using the double cross method, known from the fuel-air regulation systems, in the system for mixing two sorts of lime, enabling the start of the process line without additional start-up procedures. The authors modified the standard double cross algorithm in order to enable the start of the system without special start-up procedures, while maintaining all the features of the algorithm. The results of the tests of the modified algorithm in the lime milling and mixing system are also presented.

Słowa kluczowe

EN

control systems; double cross limiting method; programmable controllers

• Wydawca: Polish Academy of Sciences, Committee on Electrical Engineering
• Czasopismo: Archives of Electrical Engineering
• Rocznik: 2018
• Tom: Vol. 67, nr 1
• Strony: 5--16
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wz.

Twórcy

autor

Mikoś Z.

• AGH University of Science and Technology al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Jachimski M.

• AGH University of Science and Technology al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Wróbel G.

• AGH University of Science and Technology al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Hayduk G.

• AGH University of Science and Technology al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] Houtz A., Cooper D., Ratio with Cross-Limiting Override Control of a Combustion Process, http://www.controlguru.com/2008/041308.html, accessed June 2015.
• [2] Li G., Ma H., Zhang W., Zhu Y., Application of Double-cross-limiting Ratio of Closed-loop Control in Boiler Control System, Control and Instruments in Chemical Industry, vol. 5 (2008).
• [3] Zenghuan L., Guangxiang H., Lizhen W., Optimization of Furnace Combustion Control System Based on Double Cross-limiting Strategy, 2010 International Conference on Intelligent Computation Technology and Automation (ICICTA), Changsha, China, IEEE Conference Publications 2010, vol. 2, pp. 858–861 (2010).
• [4] Mikoś Z., Wróbel G., Hayduk G., Kwasnowski P., Jachimski M., Zygmunt H., ISaGRAF environment for distributed control and regulation application development, Real time systems: research progress and application: collective work (in Polish), WKiŁ, pp. 43–62 (2009).
• [5] European Committee For Electrotechnical Standarization EN61131-3:2003 Standard, Programmable controllers. Part 3: Programming languages, IEC 61131-3:2003, Brussels (2003).
• [6] Kasprzyk J., Programming Industrial Controllers, WNT (in Polish) (2006).
• [7] Danilevicius G., Ezerskis D., Kaunas L.B., Data structures and interfaces for automated PLC applications development process, IEEE 6th Conference on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS), Prague, Czech Republic, IEEE Conference Publications 2011, pp. 546–549 (2011).
• [8] Mikoś Z., Wróbel G., Hayduk G., Jachimski M., Kwasnowski P., Zygmunt H., Control system of dosing installation for lime hydration process, Proceedings of 7th International Carpathian Control Conference, Rožnov pod Radhošt˘em, Czech Republic, pp. 373–376 (2006).
• [9] Mikoś Z., Jachimski M., Wróbel G., General purpose function blocks with inputs expanding functionality for control of technological drives, Electrical Review (in Polish), vol. 91, pp. 28–35 (2015).

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).