Powiadomienia systemowe
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This article presents new method of controlled gas nitriding called ZeroFlow, which is used for nitriding of selected car engine parts. Parts such as crankshafts, camshafts, piston rings, poppet valve springs and discs, piston pins or nozzles for unit injectors was nitrided with ZeroFlow method so far. Through the use of simulation models it was possible to develop the specially dedicated process with specific parameters for each of this parts; it allows forming of nitride layer with strictly expected properties: required phase structure with thicknesses of each zone occurs in it and required hardness distribution. Moreover, through the use of simulation models this layers were obtained in in the shortest possible time, which is connected with the lowest energy consumption; therefore, nitriding process using ZeroFlow method is both economical and environmentally friendly. This article will discuss the essence of controlled gas nitriding process, with an emphasis on the influence of process parameters on results of nitriding process. This information are the basis to understand the issue of the kinetics of nitrided layer growth, and as it follows – for its practical application in designing, regulation and control of nitriding processes using simulation models (simulator of the kinetics of nitrided layer growth). Designing of ZeroFlow nitriding processes on the basis of the kinetics of nitrided layer will be shown on the example of nitriding of crankshafts for sports car engines.
Czasopismo
Rocznik
Tom
Strony
3--7
Opis fizyczny
Bibliogr. 7 poz., wykr.
Twórcy
autor
- Faculty of Machines and Transport at Poznan University of Technology, postgraduate student
autor
- Faculty of Machines and Transport at Poznan University of Technology
Bibliografia
- [1] Campbell, F.C. Elements of metallurgy and engineering alloys, ASM International, Ohio, 2008.
- [2] Kowalska, J. Regulacja i kontrola kinetyki wzrostu warstwy azotowanej na stalach w procesie regulowanego azotowania gazowego ZeroFlow. Badania i Rozwój Młodych Naukowców w Polsce. Nauki Techniczne i Inżynieryjne. Monografie 2015(12), Wyd. Młodzi Naukowcy, 120-126, Poznań 2015.
- [3] Małdziński, L. Termodynamiczne, kinetyczne i technologiczne aspekty wytwarzania warstwy azotowanej na żelazie i stalach w procesach azotowania gazowego, Wyd. Politechniki Poznańskiej, Poznań 2002.
- [4] Małdziński, L. Niskoemisyjne, ekonomiczne, regulowane azotowanie gazowe ZeroFlow, technologie zero-emisji. Zeszyty Naukowe Politechniki Poznańskiej, Poznań 2011, pp. 189-229.
- [5] Małdziński, L. Opracowanie symulatora kinetyki wzrostu warstwy azotowanej na stalach, report No. 6ZR8 2008 C/07141, unpublished, 2009.
- [6] Małdziński, L., Bazel, M., Korecki, M., Miliszewski, A., Przygoński, T. Controlled nitriding using a ZeroFlow method. Industrial experiences, Heat Treating Progress, July/August, 19-22, 2009.
- [7] Pye, D. Practical nitriding and ferritic nitrocarburazing, ASM International, Ohio 2003.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-b7f8a831-5288-4f99-9d50-79c9e98b4178