Comparative Analysis of the Effect of Machining with Wire and Ceramic Brushes on Selected Properties of the Surface Layer of EN AW-7075 Aluminium Alloy

• Autorzy: Matuszak Jakub

Identyfikatory

DOI

10.12913/22998624/146211

• Języki publikacji: EN

Abstrakty

EN

In the cutting process, when the cutting edge leaves the material, burrs are often formed on the edges of the workpiece. Due to inconveniences associated with burrs, such as problems with properly fixing the workpiece on the machine for further processing or problems with parts working in assemblies, deburring operations must be performed. In addition to that, burrs may pose danger for workers at the production stage and for customers at the stage of using the finished product. One of the popular deburring methods is brushing. Apart from deburring, brushing can be used to change surface layer properties. The aim of this study is a comparative analysis of the effect of machining with wire and ceramic brushes on microhardness and the surface quality of EN AW-7075 aluminium alloy. Results show that, for all defined brushing conditions, lower surface roughness parameters are obtained when using ceramic brushes rather than wire brushes. In contrast, the use of wire brushes leads to increased microhardness of the surface layer.

Słowa kluczowe

EN

surface roughness; microhardness; wire brushing; ceramic brushes

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2022
• Tom: Vol. 16, no 2
• Strony: 50--56
• Opis fizyczny: Bibliogr. 23 poz., fig., tab.

Twórcy

autor

Matuszak Jakub

• Lublin University of Technology

• https://orcid.org/0000-0002-3340-5237

Bibliografia

• 1. Aurich J.C., Dornfeld D., Arrazola P.J., Franke V., Leitz L., Min S. Burrs. Analysis, Control and Removal. CIRP Ann. - Manuf. Technol. 2009; 58: 519–542. DOI: 10.1016/j.cirp.2009.09.004.
• 2. Bergs T., Müller U., Barth S., Ohlert M. Experimental Analysis on Vibratory Finishing of Cemented Carbides. Manuf. Lett. 2021; 28: 21–24. DOI: 10.1016/j.mfglet.2021.02.004.
• 3. Swat M., Brünnet H., Lyubenova N., Schmitt J., Diebels S., Bähre D. Improved Process Control and Model of Axial Forces of One-Way Abrasive Flow Machining. Procedia CIRP. 2014; 14: 19–24. DOI: 10.1016/j.procir.2014.03.106
• 4. Kwon B.C., Kim K.H., Kim K.H., Ko S.L. New Abrasive Deburring Method Using Suction for Micro Burrs at Intersecting Holes. CIRP Ann. - Manuf. Technol. 2016; 65: 145–148. DOI: 10.1016/j.cirp.2016.04.085.
• 5. Yang M., Choi J., Lee J., Hur N., Kim D. Wet Blasting as a Deburring Process for Aluminum. J. Mater. Process. Technol. 2014; 214: 524–530. DOI: 10.1016/j.jmatprotec.2013.09.011.
• 6. Stango R.J. Filamentary Brushing Tools for Surface Finishing Applications. Met. Finish. 2002; 100: 82–91. DOI: 10.1016/S0026-0576(02)82007-4.
• 7. Kłonica M. Analysis of the Effect of Selected Factors on the Strength of Adhesive Joints. IOP Conf. Ser. Mater. Sci. Eng. 2018; 393: 012041, DOI: 10.1088/1757-899X/393/1/012041.
• 8. Kłonica M., Kuczmaszewski J. Modification of Ti6Al4V Titanium Alloy Surface Layer in the Ozone Atmosphere. Materials. 2019; 12: 2113. DOI: 10.3390/ma12132113.
• 9. Matuszak J., Zaleski K. Analysis of Deburring Effectiveness and Surface Layer Properties around Edges of Workpieces Made of 7075 Aluminium Alloy. Aircr. Eng. Aerosp. Technol. 2018; 90: 515–523. DOI: 10.1108/AEAT-05-2016-0074.
• 10. Matuszak J. Influence of Machining with Ceramic Brushes on the Surface Quality of EN-AW 7075 Aluminum Alloy after Abrasive Waterjet Process. In Proceedings of the 2021 IEEE 8th International Workshop on Metrology for AeroSpace (MetroAeroSpace); IEEE: Naples, Italy 2021, 344–348.
• 11. Matuszak J., Kłonica M., Zagórski I. Measurements of Forces and Selected Surface Layer Properties of AW-7075 Aluminum Alloy Used in the Aviation Industry after Abrasive Machining. Materials. 2019; 12: 3707. DOI: 10.3390/ma12223707.
• 12. Kulisz M., Zagórski I., Matuszak J., Kłonica M. Properties of the Surface Layer After Trochoidal Milling and Brushing: Experimental Study and Artificial Neural Network Simulation. Appl. Sci. 2019; 10: 75, DOI: 10.3390/app10010075.
• 13. Matuszak J., Zaleski K., Skoczylas A., Ciecieląg K., Kęcik K. Influence of Semi-Random and Regular Shot Peening on Selected Surface Layer Properties of Aluminum Alloy. Materials; 2021; 14: 7920. DOI: 10.3390/ma14247620.
• 14. Skoczylas A., Zaleski K. Effect of Centrifugal Shot Peening on the Surface Properties of Laser-Cut C45 Steel Parts. Materials. 2019; 12: 3635. DOI: 10.3390/ma12213635.
• 15. Wiertel M., Zaleski K., Gorgol M., Skoczylas A., Zaleski R. Impact of Impulse Shot Peening Parameters on Properties of Stainless Steel Surface. Acta Phys. Pol. A. 2017; 132: 1611–1615. DOI: 10.12693/APhysPolA.132.1611.
• 16. Zaleski K., Skoczylas A., Ciecieląg K. The Investigations of the Surface Layer Properties of C45 Steel After Plasma Cutting and Centrifugal Shot Peening. In; 2020; 172–185.
• 17. Sidhom N., Moussa N.B., Janeb S., Braham C., Sidhom H. Potential Fatigue Strength Improvement of AA 5083-H111 Notched Parts by Wire Brush Hammering: Experimental Analysis and Numerical Simulation. Mater. Des. 2014; 64: 503–519. DOI: 10.1016/j.matdes.2014.08.002.
• 18. Kitahara H., Yada T., Hashiguchi F., Tsushida M., Ando S. Mg Alloy Sheets with a Nanocrystalline Surface Layer Fabricated by Wire-Brushing. Surf. Coat. Technol. 2014; 243: 28–33. DOI: 10.1016/j.surfcoat.2012.04.020.
• 19. Ciecieląg K., Kecik K., Zaleski K. Defects Detection from Time Series of Cutting Force in Composite Milling Process by Recurrence Analysis. J. Reinf. Plast. Compos. 2020; 39: 890–901. DOI: 10.1177/0731684420935985.
• 20. Song D., Ma A., Sun W., Jiang J., Jiang J., Yang D., Guo G. Improved Corrosion Resistance in Simulated Concrete Pore Solution of Surface Nanocrystallized Rebar Fabricated by Wire-Brushing. Corros. Sci. 2014; 82: 437–441. DOI: 10.1016/j.corsci.2014.01.034.
• 21. Pour-Ali S., Kiani-Rashid A., Babakhani A., Davoodi A. Enhanced Protective Properties of Epoxy/Polyaniline-Camphorsulfonate Nanocomposite Coating on an Ultrafine-Grained Metallic Surface. Appl. Surf. Sci. 2016; 376: 121–132. DOI: 10.1016/j.apsusc.2016.03.131.
• 22. Kim Y., Kim J., Lee S.K. Investigation of Surface Uniformity Machined by Ceramic Brush. Int. J. Adv. Manuf. Technol. 2018; 94: 2593–2603. DOI:10.1007/s00170-017-1053-z.
• 23. Matuszak J. Effect of Ceramic Brush Treatment on the Surface Quality and Edge Condition of Aluminium Alloy after Abrasive Waterjet Machining. Adv. Sci. Technol. Res. J. 2021; 15: 254–263. DOI: 10.12913/22998624/140336.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).