Determining the route for the purpose light vehicles testing in Real Driving Emissions (RDE) test
Treść / Zawartość
In the regulations concerning approval of light vehicles starting from September 2019 it will be necessary to conduct exhaust emissions tests both on a chassis dynamometer and for real driving emissions. It is a legislative requirement set forth in EU regulations for the purpose of the RDE (Real Driving Emissions) procedure. To decide on the RDE route for the purpose of the LV exhaust emissions tests many requirements must be fulfilled, regarding for example external temperature and the topographic height of the tests, driving style (driving dynamic parameters), trip duration, length of respective test sections (urban, rural, motorway, etc.). The works on outlining RDE routes are continued across the country in various research centres. Specifying the RDE route for test purposes, i.e. works in which the authors of this article are actively involved, has become a major challenge for future approval surveys concerning the assessment of hazardous emissions from light vehicles and for development studies focusing on - for example - the consumption of energy in electric and hybrid vehicles. The test route has been chosen to ensure that the test is performed on a continual basis. Data were recorded on a constant basis with the minimum duration of the test achieved. The test involved light vehicles and PEMS device for measuring the exhaust emissions, vehicle’s speed, completed route, etc. The device was installed in such manner as to ensure that its impact on the exhaust emissions from the tested vehicle and on the device’s operation is the least. The vehicle load was consistent with the requirements of the standard and included the aforesaid measurement device, the driver and the operator of PEMS. The tests were carried out on working days. The streets and roads used for the tests were hard-surfaced. Measurements were performed in accordance with the requirements of RDE packages (Package 1-4), i.e. taking into account - among others - the engine cold start. The article discusses the method of outlining the test route fulfilling the specific requirements for RDE testing. Chosen results of exhaust emissions from a passenger car with a spark-ignition engine along the defined RDE test route have been provided. The tests discussed in the article are introductory in the area of RDE tests and provide an introduction into further studies of exhaust emissions and energy consumption in real driving conditions in conventional vehicles and vehicles with alternative engines, e.g. hybrid and electric vehicles.
Bibliogr. 7 poz., fot. kolor., rys., wykr.
- Motor Transport Institute, firstname.lastname@example.org
- Faculty of Transport Engineering, Poznan University of Technology, email@example.com
- Faculty of Transport Engineering, Poznan University of Technology, firstname.lastname@example.org
- Environment Protection Centre, Motor Transport Institute, email@example.com
- Environment Protection Centre, Motor Transport Institute, firstname.lastname@example.org
-  Commission Regulation (EU) 2016/427 of 10 March 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6).
-  Commission Regulation (EU) 2016/646 of 20 April 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6).
-  Commission Regulation (EU) 2017/1154 of 7 June 2017 amending Regulation (EU) 2017/1151 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Regulation (EC) No 692/2008 and Directive 2007/46/EC of the European Parliament and of the Council as regards real-driving emissions from light passenger and commercial vehicles (Euro 6).
-  Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and realdriving emissions and introducing devices for monitoring the consumption of fuel and electric energy.
-  MERKISZ, J., PIELECHA, J. Selected remarks about RDE test. Combustion Engines. 2016, 166(3), 54-61.
-  MERKISZ, J., PIELECHA, J., JASIŃSKI, R. Remarks about real driving emissions tests for passenger cars. Archives of Transport. 2016, 39(3), 51-63.
-  Product Guide, AVL Gas PEMS, AVL List GmbH, Graz 2012.