Influence of high-speed arc metallization wire feed rate on tribological and corrosion properties of 30HGSA steel coatings

• Autorzy: Rakhadilov Bauyrzhan , Shynarbek Aibek , Kakimzhanov Dauir , Muktanova Nazerke , Kusainov Rinat

Identyfikatory

DOI

10.2478/msp-2024-0030

• Języki publikacji: EN

Abstrakty

EN

This study investigates the influence of wire feed rate on the porosity of coatings, elemental analysis, corrosion resistance, tribological properties, and microstructure of iron-based coatings deposited by high-speed arc metallization. The coatings were obtained using a SX-600 high-speed electric arc metallizer. The properties of Fe-based coatings depend on the arcsputtering parameters. Determination of the optimum arc spraying parameters helps to minimize the deterioration of coating properties. Increasing the wire feed speed leads to an increase in the current value, which generates more heat energy in the arc to melt the wire and consequently favours the formation of dense coatings with low porosity. At high temperatures, Fe-based coatings form oxide deposits that protect the coating from further oxidation and increase coating hardness. Tribological tests show that the friction coefficient of coatings decreases in the presence of FeO on the coating surface, activating its self-lubricating ability. Investigation of the porosity of the samples showed that adjusting the wire feed affected both the pore size and the number of pores.

Słowa kluczowe

EN

wire; porosity; coating; arc metallization; structure; corrosion; tribology

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2024
• Tom: Vol. 42, No. 3
• Strony: 171--180
• Opis fizyczny: Bibliogr. 24 poz., rys., tab.

Twórcy

autor

Rakhadilov Bauyrzhan

• Sarsen Amanzholov East Kazakhstan University Ust-Kamenogorsk, Kazakhstan

autor

Shynarbek Aibek

• Shakarim State University of Semey Semey, Kazakhstan

autor

Kakimzhanov Dauir

• PlasmaScience LLP Ust-Kamenogorsk, Semey, Kazakhstan

autor

Muktanova Nazerke

• PlasmaScience LLP Ust-Kamenogorsk, Semey, Kazakhstan

autor

Kusainov Rinat

• Shakarim State University of Semey Semey, Kazakhstan

Bibliografia

• [1] Fauchais, P.L., Heberlein, J.V., Boulos, M.I., Fauchais, P.L., Heberlein, J.V., Boulos, M.I., Industrial applications of thermal spraying technology, Thermal Spray Fundamentals: From Powder to Part, Springer, 2014, p. 1401–1566, doi:10.1007/978-0-387-68991-3
• [2] Davis, J.R., (ed.)., Handbook of thermal spray technology, ASM international, Materials Park, 2004, p. 5–7.
• [3] Fukumoto, M., The current status of thermal spraying in Asia, J. Therm. Spray Technol., 2008, 17: 5–13, doi:10.1007/s11666-008-9154-8
• [4] Kengesbekov, A., Rakhadilov, B., Sagdoldina, Z., Improving the efficiency of air plasma spraying of titanium nitride powder, Coatings, 2022, 12(11): 1644, doi:10.3390/coatings12111644
• [5] Ilyushchanka, A.P., Baray, S.G., Letsko, A.I., Talako, T.L., Manoila, Y.D., Janu, Y., et al., Preparation of Ti-Si-C system and their ceramic composite coatings using gas flame spraying for microwave absorbing applications, Surf. Coat. Technol.,2021, 405: 126631, doi:10.1016/j.surfcoat.2020.126631
• [6] Srikanth, A., Basha, G.M.T., Venkateshwarlu, B., A. brief review on cold spray coating process, Mater. Today Proc., 2020, 22: 1390–1397, doi:10.1016/j.matpr.2020.01.482
• [7] Rakhadilov, B., Buitkenov, D., Sagdoldina, Z., Idrisheva, Z., Zhamanbayeva, M., Kakimzhanov, D., Preparation and characterization of NiCr/NiCr-Al2O3/Al2O3 multilayer gradient coatings by gas detonation spraying, Coatings, 2021, 11(12): 1524, doi:10.3390/coatings11121524
• [8] Rakhadilov, B., Magazov, N., Kakimzhanov, D., Apsezhanova, A., Molbossynov, Y., Kengesbekov, A.,Influence of spraying process parameters on the characteristics of steel coatings produced by arc spraying method, Coatings, 2024, 14(9): 1145, doi:10.3390/coatings14091145
• [9] Weis, S., Brumm, S., Grunert, R., Morgenschweis, J., Bosler, J., Grund, T., Influence of current modulation on melting behavior during wire arc spraying, Metals, 2022, 12(8): 1347, doi:10.3390/met12081347
• [10] Devaraj, S., McDonald, A., Chandra, S., Metallization of porous polyethylene using a wire-arc spray process for heat transfer applications, J. Therm. Spray. Technol., 2021, 30: 145–156, doi:10.1007/s11666-020-01119-1
• [11] Ndumia, J.N., Kang, M., Gbenontin, B.V., Lin, J., Nyambura, S.M., A review on the wear, corrosion and high-temperature resistant properties of wire arc-sprayed Fe-based coatings, Nanomaterials, 2021, 11(10): 2527, doi:10.3390/nano11102527
• [12] Wielage, B., Pokhmurska, H., Student, M., Gvozdeckii, V., Stupnyckyj, T., Pokhmurskii, V., Iron-based coatings arc-sprayed with cored wires for applications at elevated temperatures, Surf. Coat. Technol., 2013, 220: 27–35, doi:10.1016/j.surfcoat.2012. 12.013
• [13] Matyushkin, B.A., Denisov, V.I., Tolkachev, A.A., Tekhnologicheskie osobennosti elektrodugovoj metallizacii v otrasli APK, Svarochnoe Proizvodstvo, 2016, 12: 46–50, [in Russian]
• [14] Logachev, V.N., Litovchenko, N.N., Elektrodugovaya metallizaciya: puti sovershenstvovaniya oborudovaniya i tekhnologii, Trudy GOSNITI, 2014, 117: 228–234, [in Russian]
• [15] Newbery, A., Grant, P., Oxidation during electric arc spray forming of steel, J. Mater. Process. Technol., 2006, 178(1): 259–269, doi: 10.1016/j.jmatprotec.2006.03.176
• [16] Newbery, A., Grant, P., Droplet splashing during arc spraying of steel and the effect on deposit microstructure, J. Therm. Spray. Technol., 2000, 9(2):250–258, doi:10.1361/105996300770350005
• [17] Zhu, Y., Liao, H., Coddet, C., Xu, B., Characterization via image analysis of cross-over trajectories and inhomogeneity in twin wire arc spraying, Surf. Coat. Technol., 2003, 162(2): 301–308, doi:10.1016/S0257-8972(02)00706-5
• [18] Erdemir, A., Li, S., Jin, Y., Relation of certain quantum chemical parameters to lubrication behavior of solid oxides, Int. J. Mol. Sci., 2005, 6(6): 203–218, doi:10.3390/i6060203
• [19] Lee, J., Kwon, H., Kim, Y.G., Lee, C., Tribological and microstructural properties of carbon steel coatings fabricated by wire arc spray, Met. Mater. Int., 2020, 26: 650–659, doi:10.1007/s12540-019-00354-8
• [20] Rasband, W., Program Image J (Image Processing and Data Analysisin Java), rsb.info.nih.gov/ij/
• [21] Hahn, M., Theissmann, R., Gleising, B., Dudzinski, W., Fischer, A., Microstructural alterations within thermal spray coatings during highly loaded diesel engine tests, Wear, 2009, 267(5–8): 916–924, doi:10.1016/j.wear.2008.12.109
• [22] Lin, J., Wang, Z., Lin, P., Cheng, J., Zhang, J., Zhang, X., Microstructure and corrosion resistance of Fe-based coatings prepared by twin wires arc spraying process, J. Therm. Spray. Technol., 2014, 23: 333–339, doi:10.1007/s11666-013-0017-6
• [23] Prchlik, L., Sampath, S., Effect of the microstructure of thermally sprayed coatings on friction and wear response under lubricated and dry sliding conditions, Wear, 2007, 262(1–2): 11–23, doi:10.1016/j.wear.2006.03.042
• [24] Bobzin, K., Ernst, F., Richardt, K., Schlaefer, T., Verpoort, C., Flores, G., Thermal spraying of cylinder bores with the plasma transferred wire arc process, Surf. Coat. Technol., 2008, 202(18): 4438–4443, doi:10.1016/j.surfcoat.2008.04.023 Tribological and corrosion properties of 30HGSA steel coatings 180