Plain stitch-bonded multi-plies for textile reinforced concrete

• Autorzy: Hausding J. , Engler T. , Franzke G. , Köckritz U. , Cherif C.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the research activities in the field of textile reinforced concrete carried out by the Institute of Textile and Clothing Technology (ITB) of the Technische Universität Dresden, Germany. Extensive research has been conducted with the aim to fully use the tensile strength of the applied high-performance fiber material in the reinforcing textile. To achieve this, the textile machinery was adjusted and improved and new testing methods were developed. This research has resulted thus far in several innovative applications for the repair of existing buildings as well as the production of precast concrete parts.

Słowa kluczowe

EN

AR glass filament yarn; stitch-bonding; multi-ply; Malimo; textile reinforced concrete; coating

PL

przędza z włókna szklanego; Malimo; beton zbrojony tekstyliami; powłoka

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2006
• Tom: Vol. 6, no. 2
• Strony: 81--90
• Opis fizyczny: Bibliogr. 10 poz.

Twórcy

autor

Hausding J.

• Institute of Textile and Clothing Technology Technische Universität Dresden, Germany

autor

Engler T.

• Institute of Textile and Clothing Technology Technische Universität Dresden, Germany

autor

Franzke G.

• Institute of Textile and Clothing Technology Technische Universität Dresden, Germany

autor

Köckritz U.

• Institute of Textile and Clothing Technology Technische Universität Dresden, Germany

autor

Cherif C.

• Institute of Textile and Clothing Technology Technische Universität Dresden, Germany

Bibliografia

• 1. Offermann, P.; Engler, Th.; Gries, Th. and Roye, A., 2004, “Technische Textilien zur Bewehrung von Betonbauteilen,” Beton- und Stahlbetonbau, Vol. 99, No. 6, pp. 437-443
• 2. Abdkader, A.; Offermann, P.; Jesse, F. and Curbach, M., 2003, “Textilbewehr-ter Beton mit AR-Glasfilamentgarnen,” Industrial Fabrics Bulletin, Vol. 13, No. 3, pp. 50-54
• 3. Abdkader, A.; Engler, Th.; Franzke, G. and Offermann, P., 2004, “Processability of coated AR Glass filament yarns,” ITB-Mitteilungen, No. 2, pp. 9-15
• 4. Engler, Th.; Franzke, G.; Horlacher, H.-B., Offermann, P. and Schmutterer, Ch., 2004, “Abrasionsverhalten textilbewehrter Feinbetonschichten,“ Kettenwirk-Praxis, Vol. 38, No. 2, pp. 17-20
• 5. Offermann, P.; Köckritz, U.; Abdkader, A.; Engler, Th. and Waldmann, M., 2003, “Load-Adapted Textile Structures for Concrete Reinforcement,” Textile Reinforced Structures. Proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 2003, ed. Curbach, M., Technische Universität Dresden, pp. 15-28
• 6. Köckritz, U.; Franzke, G.; Offermann, P. and Waldmann, M., 2004, “Stabilisation of open grid structures in the warp knitting machine,” Proceedings of the 7th Dresden Textile Conference 2004, Dresden, Germany
• 7. Köckritz, U.; Franzke, G.; Offermann, P. and Waldmann, M., 2004, “The Sustainable Structural Stabilisation of Open Grid Warp Knits,” 11th International Conference on Composite / Nano Engineering (ICCE-11), Hilton Head Island, USA 2004
• 8. Köckritz, U.; Klug, P.; Offermann, P. and Giessmann, A., 2004 “Drying of Textile Structures by Means of Convective Heat Flow,” Technical Textiles Vol. 47, No. 4, pp. 202-206
• 9. Jesse, F., 2004, Tragverhalten von unidirektionalen und textilen Bewehrungen aus Multifilamentgarnen in einer zementgebundenen Matrix, Doctoral thesis, Technische Universität Dresden
• 10. Engler, Th.; Schierz, M.; Franzke, G. and Offermann, P., 2002, “Standfest auch im Sturm durch multiaxiale Gelege,” Kettenwirk-Praxis, Vol. 36, No. 4, pp. 22-23

Uwagi

The paper was originally presented at the American Concrete Institute (ACI) Spring Convention in New York under the title: “State of the Art and Perspectives of Textile Reinforcements of Concrete Components” in April 2005