A software tool for automatic geometry generation of a micro turbine

• Autorzy: Hoffmann S. P. , Rückert F. U. , Theis D. , Ruffino A. G. , Lehser-Pfeffermann D. , Hübner D.
• Języki publikacji: EN

Abstrakty

EN

Heat recovery plays an important role in increasing the efficiency of renewable energy facilities like biomass furnaces, solar power plants or biofuel combustion engines. As the overall efficiency of the facilities can be increased by recovering the energy. The available waste heat can be converted directly into mechanical energy, pressure or subsequently converted into electrical energy by coupling the expansions machine with a generator. The waste heat can be converted by Organic Rankine Cycle (ORC). Therefore, an expansion machine, e.g. a turbine is required. Also small amounts of waste heat can be recovered, if so-called micro turbines are used. Design and construction of such micro turbines always follow fixed rules. Aim of this work is to explain the rules how to design a micro turbine. Furthermore, our workflow and a software tool which follows these rules should be presented.

Słowa kluczowe

EN

organic Rankine cycle; ORC; microturbine; computational fluid dynamics; CFD; fused deposition modeling; FDM; waste heat recovery; WHR

PL

organiczny obieg Rankine’a; ORC; mikroturbina; obliczeniowa mechanika płynów; CFD; osadzanie topionego materiału; FDM; odzysk ciepła odpadowego; WHR

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2018
• Tom: Vol. 22, nr 2
• Strony: 465--478
• Opis fizyczny: Bibliogr. 21 poz., il. (w tym kolor.), fot., wykr.

Twórcy

autor

Hoffmann S. P.

• University of Applied Sciences Saarbrücken, Saarbrücken, Germany

autor

Rückert F. U.

• University of Applied Sciences Saarbrücken, Saarbrücken, Germany

autor

Theis D.

• University of Applied Sciences Saarbrücken, Saarbrücken, Germany

autor

Ruffino A. G.

• University of Applied Sciences Saarbrücken, Saarbrücken, Germany

autor

Lehser-Pfeffermann D.

• University of Applied Sciences Saarbrücken, Saarbrücken, Germany

autor

Hübner D.

• University of Applied Sciences Saarbrücken, Saarbrücken, Germany

Bibliografia

• [1] Paulus, M.: Wärmerückgewinnungspotenziale durch die Nutzung von Abgas an Walzwerk-öfen, Bachelorarbeit, htw saar, 2015.
• [2] Freymann, R., Strobl, W.: Der Turbosteamer: Ein System zur Kraft-Wärme-Kopplung im Automobil, MTZ, 69, 2008.
• [3] Quoilin, S.: Experimental Study and Modeling of a Low Temperature Rankine Cycle for Small Scale Cogeneration, PhD Thesis, University of Liege, 2007.
• [4] Ibaraki, S., Endo, T., Kojima, Y., Takahashi, K., Baba, T., Kawajiri, S.: Study of Efficient On-board Waste Heat Recovery System Using Rankine Cycle, Re- view of Automotive Engineering, 28, 307-313, 2007.
• [5] Bredel, E., Nickl, J.: Abwärmenutzung im Antrieb von Heute und Morgen, MTZ, 04, 72, 2001.
• [6] Ringler, J., Seifert, M., Guyotot, V., Hübner, W.: Rankine Cycle for Waste Heat Recovery of IC Engines; SAE International; 2009-01-0174, 2009.
• [7] Perić, M., Ferziger, J. H.: Computational Methods for Fluid Dynamics, Springer, 2002.
• [8] Engineering Simulations and 3-D Design Software, Available online: www.ANSYS.com.
• [9] https://www.3ds.com/de/produkte-und-services/catia.
• [10] https://www.plm.automation.siemens.com/de/products/lms/imagine-lab.
• [11] Noll, B.: Numerische Strömungsmechanik, Berlin 1993.
• [12] Menter, F., Esch, T., Kubacki, S.: Transition modelling based on local Variables, In Proceedings of the Fifth International Symposium on Engineering Turbulence Modelling and Measurements, Mallorca, Spain, 16-18 September 2002, Engineering Turbulence Modelling and Experiments 5. Rodi, W., Fueye, N., Eds., Elsevier: Amsterdam, Netherlands, 555-564, 2002.
• [13] Resch, M., Currle-Linde, N., Küster, U., Risio, B.: A Grid Framework for Computational Mechanics Applications, Mastorakis, N. (Eds.), Proceedings of the 2nd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS’ 06), 360-369, Venice, Italy, 2006.
• [14] Rückert, F. U., Ströhle, J., Sabel, T., Schnell, U., Hein, K. R. G.: Advantages of Combining Different Grid Types for 3D Furnace Modelling, Sixth Interna- tional Conference on Technologies and Combustion for a Clean Environment, Porto, Portugal, 2001.
• [15] Benim, A. C., Chattopadhyay, H., Nahavandi, A.: Computational Analysis of turbulent forced Cconvection in a Channel with a triangular Prism, Int. J. Therm. Sci., 50, 1973-1983, 2011.
• [16] Wursthorn, S.: Numerische Untersuchung kavitierender Strömungen in einer Modellkreiselpumpe, Universität Karlsruhe, Dissertation, Karlsruhe, 2001.
• [17] Benim, A. C., Nahavandi, A., Syed, K.: URANS and LES analysis of turbulent swirling flows, Progress in Computational Fluid Dynamics An Int. J., 5, 444-454., 2005.
• [18] Barth, T. J., Jespersen, D.: The Design and Application of upwind Schemes on unstructured Meshes, In Proceedings of the AIAA 27th Aerospace Sciences Meeting, Reno, NV, USA, Technical Report, AIAA-89-0366, 1989.
• [19] Durbin, P. A., Pettersson Reif, B. A.: Statistical Theory and Modeling for Turbulent Flows, 2nd ed., Wiley: Chichester, UK, 2011.
• [20] Roloff/Matek: Maschinenelemente, 21. Auflage, Springer Vieweg, 2013.
• [21] Roloff/Matek: Maschinenelemente - Tabellenbuch, 21. Auflage, Springer Vieweg, 2013.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).