Formulating of reverse task of chosen class of mechatronic systems

• Autorzy: Buchacz A.
• Języki publikacji: EN

Abstrakty

EN

Purpose: of this paper is modelling by means of the first and second category graphs and analysis of vibrating subsystem of mechatronic systems by means of the exact and approximate methods. Design/methodology/approach: Approach was to nominate the relevance or irrelevance between the characteristics obtained by means of the exact method (only for the mechanical subsystem) and the approximate method. Such formulation concerns mostly the relevance of the natural frequencies-poles of the characteristics both mechanical subsystems and mechatronic systems. Findings: are approximate solutions requiring all the conditions for torsionally vibrating mechanical and/or mechatronic systems. It is an introduction to synthesis of these systems modelled by graphs of the considered category. Research limitations/implications: is both torsional vibrating continuous mechanical subsystem and mechatronic systems of the linear continuous type. Practical implications: of this work is to present the introduction to synthesis of considered class of mechatronic bar-systems with a constant changeable cross-section. Originality/value: Originality of such formulation is focused on the use of the different category graphs for modelling and synthesising by means of the continued fraction expansion method represented by graphs of torsionally vibrating bars to the synthesis of discrete-continuous mechatronic systems.

Słowa kluczowe

EN

applied mechanics; exact and approximate methods; graphs and hypergraphs; vibrating subsystem of mechatronic system

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2012
• Tom: Vol. 54, nr 1
• Strony: 75--82
• Opis fizyczny: Bibliogr. 29 poz., rys., tab.

Twórcy

autor

Buchacz A.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] S. Bellert, H. Woźniacki, The analysis and synthesis of electrical systems by means of the method of structural numbers, WNT, Warsaw, 1968 (in Polish).
• [2] C. Berge, Graphs and hypergraphs, American Elsevier Publishing Co., Inc., New York/North Holland Publishing Co., Amsterdam-London, 1973.
• [3] K. Białas, A. Buchacz, T. Dzitkowski, Synthesis of active mechanical systems with dumping inview of polar graphs and structural numbers, Monograph No 230, Silesian University of Technology Press, Gliwice, 2009 (in Polish).
• [4] A. Buchacz, Modelling, synthesis and analysis of bar systems characterized by a cascade structure represented by graphs, Mechanism and Machine Theory 30/7 (1995) 969-986.
• [5] A. Buchacz, The synthesis of vibrating bar-systems represented by graph and structural numbers, Scientific Letters of Silesian University of Technology, MECHANICS 104, Silesian University of Technology Press, 1991 (in Polish).
• [6] A. Buchacz, A. Dymarek, T. Dzitkowski, Design and examining of sensitivity of continuous and discrete-continuous mechanical systems with required frequency spectrum represented by graphs and structural numbers, Monograph 88, Silesian University of Technology Press, Gliwice, 2005 (in Polish).
• [7] A. Buchacz, The expansion of the synthesized structures of mechanical discrete systems represented by polar graphs, Journal of Materials Processing Technology 164-165 (2005) 1277-1280.
• [8] A. Buchacz, K. Żurek, Reverse task of dynamice of active mechanical systems by means the graphs and structural numbers methods, Monograph 81, Silesian University of Technology Press, Gliwice, 2005 (in Polish).
• [9] A. Buchacz, Modelling, synthesis, modification, sensitivity and analysis of mechanic and mechatronic systems. Journal of achievements in materials and manufacturing engineering 24/1 (2007) 198-207.
• [10] A. Buchacz, Dynamical flexibility of discrete-continuous vibrating mechatronic system, Journal of Achievements in Materials and Manufacturing Engineering 28/2 (2008) 159-166.
• [11] A. Buchacz, Characteristics of discrete-continuous flexibly vibrating mechatronic system, Journal of Achievements in Materials and Manufacturing Engineering 28/1 (2008) 43-46.
• [12] A. Buchacz, Calculation of flexibility of vibrating beam as the subsystem of mechatronic system by means the exact and approximate methods, Proceedings in Applied Mathematics and Mechanics 9/1 (2009) 373-374.
• [13] A. Buchacz, Transformations of hypergraphs of beams as models in synthesis of flexibly vibrating continuous mechanical systems, Vestnik Krymskoy Akademii Nauk -Sevastopolskie Otdelenie 1 (2010) 35-38.
• [14] A. Buchacz, Orthogonalization method of analysis of mechanical and mechatronic systems, Les problémes du technoshere et de la formation des cadres d'Ingénieurs contemporains, Recueil des exposés des participants du III Séminaire international scientifique et méthodique, Sousse, Donetsk, 2009, 85-88.
• [15] A. Buchacz, Comparison of characteristics of subsystems and systems as introduction to synthesis of torsionally vibrating mechatronic systems, Les problémes du technoshere et de la formation des cadres d'Ingenieurs contemporains, Recueil des exposes des participants du IV Seminaire international scientifique et méthodique, Hammamet, Donetsk ,2010, 85-88.
• [16] A. Buchacz, Hypergraphs of simple beams - models of their analysis in synthesis of complex beams-systems, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 233-242.
• [17] A. Buchacz, A. Wróbel, Computer aided analysis of piezoelectric plates, Solid State Phenomena, - Mechatronic Systems and Materials, Mechatronic Systems and Robotics 164 (2010) 239-242.
• [18] A. Buchacz, S. Żółkiewski, Longitudinal three-dimensional vibrations of the round rod with taking into consideration the transportation effect, Proceedings of the International Conference of Machine-Building and Technosphere of the XXI Century, Sevastopol 5 (2005) 17-20.
• [19] J. Callahan, H. Baruh, Vibration monitoring of cylindrical shells using piezoelectric sensors, Finite Elements in Analysis and Design 23 (1996) 303-318.
• [20] W. Kurnik, Damping of mechanical vibrations utilizing shunted piezoelements, Machine Dynamics Problems 28/4 (2004) 15-26.
• [21] P. Lu, K. H. Lee, S. P. Lim, Dynamical analysis of a cylindrical piezoelectric transducer, Journal of Sound and Vibration 259/2 (2003) 427-443.
• [22] M. Płaczek, A comparison of PZT and MFC piezoelectric transducers used as actuators in vibrating mechatronic systems, Proceedings of the 16th ModTech International Conference, Iasi, 2012, 705-708.
• [23] M. Płaczek, Indication of the suitable model of a mechatronic system as an introduction to the synthesis task, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 338-349.
• [24] J. Wojnarowski, A. Buchacz, Use of hypergraphs and complete structural numbers in the analysis of vibrating beam systems with non-linearly changing cross-sections, Vibration Engineering 3/4 (1989) 593-598.
• [25] A. Wróbel, Kelvin Voigt’s model of single piezoelectric plate, Journal of Vibroengineering 14/2 (2012) 534-537.
• [26] A. Wróbel, Model of piezoelectric including material damping, Proceedings of the 16th ModTech International Conference, 2012, 1061-1064.
• [27] S. Żółkiewski, Analysis and modelling of rotational systems with the Modyfit application, Journal of Achievements in Materials and Manufacturing Engineering 30/1 (2008) 59-66.
• [28] S. Żółkiewski, Numerical application for dynamical analysis of rod and beam systems in transportation, Solid State Phenomena 164 (2010) 343-348.
• [29] S. Żółkiewski, Modelling of dynamical systems in transportation using the Modyfit application, Journal of Achievements in Materials and Manufacturing Engineering 28/1 (2008) 71-74.