Aspekty akustyczne strugi syntetyzowanej : przegląd

• Autorzy: Smyk Emil

Identyfikatory

DOI

10.37660/dme.2020.16.8.4

Warianty tytułu

EN

Acoustic aspects of synthetic jet : rewiev

• Języki publikacji: PL

Abstrakty

PL

Struga syntetyzowana znajduje coraz więcej zastosowań zarówno w technice, jak i w nauce. Do jej generowania wykorzystuje się najczęściej głośniki lub elementy piezoelektryczne. Głośniki zapewniają większy strumień pędu, jednak generują również większy hałas, co może być problematyczne przy komercyjnych zastosowaniach siłowników strugi syntetyzowanej. W artykule dokonano przeglądu publikacji dotyczących aspektu poziomu dźwięku generowanego przez siłowniki strugi oraz wskazano kierunek przyszłego rozwoju w tej dziedzinie.

EN

Synthetic jet finds more and more applications in technology and science. It is generated most often by loudspeakers or piezoelectric elements. The loudspeakers provide greater velocity momentum, but also generates more noise, which can be problematic in commercial applications of the synthetic jet actuator. The paper reviews articles on the aspect of the sound level generated by the synthetic jet actuators and show the direction of future development in this field.

Słowa kluczowe

PL

poziom hałasu; akustyka; generator strugi syntetyzowanej

EN

noise level; acoustic; synthetic jet actuator

• Wydawca: Wydawnictwa Uczelniane Politechniki Bydgoskiej im. Jana i Jędrzeja Śniadeckich
• Czasopismo: Developments in Mechanical Engineering
• Rocznik: 2020
• Tom: nr 16(8)
• Strony: 41--49
• Opis fizyczny: Bibliogr. 25 poz., fot., rys., tab.

Twórcy

autor

Smyk Emil

• Uniwersytet Technologiczno-Przyrodniczy, Al. prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Polska

Bibliografia

• [1] Arik, M., "An investigation into feasibility of impingement heat transfer and acoustic abatement of meso scale synthetic jets", Appl. Therm. Eng. 27 (2007), 1483-1494, doi:10.1016/j.applthermaleng.2006.09.027.
• [2] Bhapkar, U.S., Srivastava, A., Agrawal, A., "Acoustic and heat transfer aspects of an inclined impinging synthetic jet", Int. J. Therm. Sci. 74 (2013), 145-155, doi:10.1016/j.ijthermalsci.2013.06.007.
• [3] Bhapkar, U.S., Srivastava, A., Agrawal, A., "Acoustic and heat transfer characteristics of an impinging elliptical synthetic jet generated by acoustic actuator", Int. J. Heat Mass Transf. 79 (2014), 12-23, doi:10.1016/j.ijheatmasstransfer.2014.07.083.
• [4] Brouckova, Z., Travnicek, Z., "Visualization study of hybrid synthetic jets", J. Vis. 18 (2015), 581-593, doi: 10.1007/s12650-014-0256-8.
• [5] Catalin, A.M., Florin, F., "Numerical simulations of synthetic jets in aerodynamic applications", Incas Bull. 6 (2014), 81-93, doi:10.13111/2066-8201.2014.6.S1.9.
• [6] de Luca, L., Girfoglio, M., Chiatto, M., Coppola, G., "Scaling properties of resonant cavities driven by piezo-electric actuators", Sensors Actuators, A Phys. 247 (2016), 465-474, doi:10.1016/j.sna.2016.06.016.
• [7] Gil, P., "Synthetic jet Reynolds number based on reaction force measurement", J. Fluids Struct. 81 (2018), 466-478, doi:10.1016/j.jfluidstructs.2018.05.011.
• [8] Greco, C.S., Ianiro, A., Astarita, T., Cardone, G., "On the near field of single and twin circular synthetic air jets", Int. J. Heat Fluid Flow 44, (2013), 41-52, doi:10.1016/j.ijheatfluidflow.2013.03.018.
• [9] Hanfeng, W., Yu, Z., Chao, Z., Xuhui, H., "Aerodynamic drag reduction of an Ahmed body based on deflectors", J. Wind Eng. Ind. Aerodyn. 148 (2016), 34-44, doi:10.1016/j.jweia.2015.11.004.
• [10] International Organization for Standardization (ISO) Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010); ISO: Geneva, Switzerland, 2010, p. 48.
• [11] International Organization for Standardization (ISO) EN ISO 9241-6:2002. Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999); ISO: Geneva, Switzerland, 1999, 32.
• [12] Jabbal, M., Jeyalingam, J., "Towards the noise reduction of piezoelectrical-driven synthetic jet actuators", Sensors Actuators, A Phys. 266 (2017), 273-284, doi:10.1016/j.sna.2017.09.036.
• [13] Jeyalingam, J., Jabbal, M., "Experimental investigation of the aeroacoustics of synthetic jet actuators in quiescent conditions", Sensors Actuators, A Phys. 280 (2018), 52-60, doi:10.1016/j.sna.2018.07.007.
• [14] Kanase, M.M., Mangate, L.D., Chaudhari, M.B., "Acoustic aspects of synthetic jet generated by acoustic actuator", J. Low Freq. Noise Vib. Act. Control 37 (2018), 31-47, doi:10.1177/1461348418757879.
• [15] Kopiev, V.F., Zaytsev, M.Y., Ostrikov, N.N., "Subsonic jet noise suppression by a corrugated nozzle", Acoust. Phys. 59 (2013), 207-209, doi:10.1134/S1063771013010090.
• [16] Lasance, Aarts, R.M., Ouweltjes, O., "Synthetic jet cooling part II: Experimental results of an acoustic dipole cooler", Proceedings of the 2008 Twenty-fourth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2008, 26-31.
• [17] Le, L. Van, Bui, T.T., Nguyen, C.N., Nguyen, A.N., Dinh, T.X., Dang, L.B., Tran, C.D., Chu, T.D., Dau, V.T., "Simulation and Experimental Study of a Synthetic Jet Valveless Pump", IEEE/ASME Trans. Mechatro. 25/3 (2020), 1162-1170, doi:10.1109/TMECH.2019.2960332.
• [18] Mahalingam, R., Heffington, S., Jones, L., Williams, R., "Synthetic Jets for Forced Air Cooling of Electronics", Electron. Cool. 13 (2007), 1-5.
• [19] Mangate, L.D., Chaudhari, M.B., "Heat transfer and acoustic study of impinging synthetic jet using diamond and oval shape orifice", Int. J. Therm. Sci. 89 (2015), 100-109, doi:10.1016/j.ijthermalsci.2014.10.006.
• [20] Mangate, L., Yadav, H., Agrawal, A., Chaudhari, M., "Experimental investigation on thermal and flow characteristics of synthetic jet with multiple-orifice of different shapes", Int. J. Therm. Sci. 140 (2019), 344-357, doi:10.1016/j.ijthermalsci.2019.02.036.
• [21] Mohseni, K., Mittal, R. (eds.), "Synthetic jets: fundamentals and applications", CRC Press, 2014.
• [22] Schwickert, M.M. "SynJet ® Thermal Management Technology Increases LED Lighting System Reliability", IEEE Trans. Reliab. 29 (2009), 449-482.
• [23] Smyk, E., Wawrzyniak, S., Peszyński, K., "Synthetic jet actuator with two opposite diaphragms", Mech. Mech. Eng. 24 (2020), 17-25, doi:https://doi.org/10.2478/mme-2020-0004.
• [24] Sun, C.L., Sun, C.Y., "Effective mixing in a microfluidic oscillator using an impinging jet on a concave surface", Microsyst. Technol. 17 (2011), 911-922, doi:10.1007/s00542-010-1177-7.
• [25] Yu, Q., Mei, Z., Bai, M., Xie, D., Ding, Y., Li, Y., "Cooling performance improvement of impingement hybrid synthetic jets in a confined space with the aid of a fluid diode", Appl. Therm. Eng. 157 (2019), 113749, doi:10.1016/j.applthermaleng.2019.113749.

Uwagi

Błędny numer DOI