Adsorption of reactive Orange 4 on sesame stalks. Modeling, kinetics and equilibrium

• Autorzy: Tanyildizi M. S. , Demirci Y.

Identyfikatory

DOI

10.5277/epe170301

• Języki publikacji: EN

Abstrakty

EN

Placket Burman design (PBD) and central composite design (CCD) were employed to study the adsorption of Reactive Orange 4 (RO4) on sesame stalk. In the study conducted with the PBD, a total of seven parameters (initial dye concentration, initial pH of solution, temperature, amount of adsorbent, particle size, contact time, and shaking speed) were studied, and four of these were found to influence the adsorption of dye. A mathematical model equation was developed by using the CCD. Analysis of variance (ANOVA) indicated a high coefficient of determination (R²= 0.93). The initial dye concentration, amount of sesame stalk, contact time, and initial pH were shown to be very significant (p < 0.05) for RO4 adsorption. The data for the adsorption of RO4 at equilibrium on sesame stalk were analyzed by the Langmuir, Freundlich, and Tempkin models. Temperature increase from 20 to 60 degrees C enhanced the adsorption capacity of the monolayer from 84.75 to 178.57 mg/g. The rate constants were calculated for various initial concentrations of the dye by using pseudo-first and pseudo-second order kinetic and particle diffusion adsorption models. The kinetic evaluations showed that the experimental data were in accordance with the pseudo-second order model.

Słowa kluczowe

EN

aqueous solutions; basic dye; removal; optimization; degradation; biomass; design

PL

barwnik reaktywny; hydroliza; łodyga sezamu; biomasa; degradacja; optymalizacja

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Environment Protection Engineering
• Rocznik: 2017
• Tom: Vol. 43, nr 3
• Strony: 5--20
• Opis fizyczny: Bibliogr. 18 poz., tab., rys.

Twórcy

autor

Tanyildizi M. S.

• Firat University, Engineering Faculty, Department of Bioengineering, 23119, Elazığ, Turkey.

autor

Demirci Y.

• Adiyaman University, Engineering Faculty, Department of Environmental Engineering, 02040 Adiyaman, Turkey

Bibliografia

• [1] ALTINIŞIK A., GÜR E., SEKI Y., A natural sorbent, Luffa cylindrica for the removal of a model basic dye, J. Hazard. Mater., 2010, 179, 658.
• [2] JANAKIA V., VIJAYARAGHAVANB K., OHC B.-T., LEEC K.-J., MUTHUCHELIAND K., RAMASAMYA A.K., KAMALA-KANNANC S., Starch/polyaniline nanocomposite for enhanced removal of reactive dyes from synthetic effluent, Carbohydr. Polym., 2012, 90, 1437.
• [3] MURUGANANDHAM M., SWAMINATHAN M., Photocatalytic decolourisation and degradation of Reactive Orange 4 by TiO-UV process, Dye Pigment, 2006, 68, 133.
• [4] SUTEU D., ZAHARIA C., MALUTAN T., Removal of orange 16 reactive dye from aqueous solutions by waste sunflower seed shells, J. Serbian Chem. Soc., 2011, 76, 607.
• [5] OLYA M.E., PIRKARAMI A., MIRZAIE M., Adsorption of an azo dye in an aqueous solution using hydroxyl-terminated polybutadiene (HTPB), Chemosphere, 2013, 91, 935.
• [6] SUMARI S.M., HAMZAH Z., YASIN Y., Adsorption of Reactive Orange16 from aqueous solutions by MgAlNO3 -LDH. Kinetic and Equilibrium Studies, IEEE, 2010, 16, 16.
• [7] HAMEED B.H., EL-KHAIARY M.I., Removal of basic dye from aqueous medium using a novel agricultural waste material: pumpkin seed hull, J. Hazard. Mater., 2008, 155, 601.
• [8] ATES F., PUTUN A., PUTUN E., Pyrolysis of two different biomass samples in a fixed-bed reactor combined with two different catalysts, Fuel, 2006, 85, 1851.
• [9] BOX G.E.P., WILSON K.B., On the experimental attainment of optimum conditions, J. Royal Stat. Soc. Ser. B Method., 1981, 13, 1.
• [10] TANYİLDİZİ M.S., Modeling of adsorption isotherms and kinetics of reactive dye from aqueous solution by peanut hull, Chem. Eng. J., 2011, 168, 1234.
• [11] TANYİLDİZİ M.Ş., ÖZER D., ELIBOL M., Optimization of -amylase production by Bacillus sp. using response surface methodology, Process Biochem., 2005, 40, 2291.
• [12] KUMAR A., PRASAD B., MISHRA I.M., Optimization of process parameters for acrylonitrile removal by a low-cost adsorbent using Box–Behnken design, J. Hazard. Mater., 2008, 150, 174.
• [13] DAWOOD S., SEN T.K., Removal of anionic dye Congo Red from aqueous solution by raw pine and acid-treated pine cone powder as adsorbent: equilibrium, thermodynamic, kinetics, mechanism and process design, Water Res., 2012, 46, 1933.
• [14] KÖRBAHTI B.K., RAUF M.A., Application of response surface analysis to the photolytic degradation of Basic Red 2 dye, Chem. Eng. J., 2008, 138, 166.
• [15] HO Y., MCKAY G., Pseudo-second order model for sorption processes, Process Biochem., 1999, 34, 451.
• [16] SAFA Y., BHATTI H.N., Kinetic and thermodynamic modeling for the removal of Direct Red 31 and Direct Red 26 dyes from aquoeus solutions by rice husk, Desalination, 2011, 273, 313.
• [17] O’MAHONY T., GUIBAL E., TOBN J.M., Reactive dye biosorption by rhizopus arrhizus, Enzyme Microb. Technol., 2002, 31, 456.
• [18] BASERİ J.R., PALANİSAMY P.N., SİVAKUMAR P., Polyaniline nano composite for the adsorption of reactive dye from aqueous solutions: equilibrium and kinetic studies, Asian J. Chem., 2013, 25, 4145.