Porównanie modelowanych oraz rzeczywistych wartości parametrów świetlnych i kolorymetrycznych białych diod LED pracujących w szerokim zakresie temperatur

• Autorzy: Listowski Maciej

Identyfikatory

DOI

10.15199/48.2022.06.10

Warianty tytułu

EN

The real and modeled values of photometric and colorimetric parameters comparison of white LEDs operating at wide temperature range

• Języki publikacji: PL

Abstrakty

PL

Z powodu czasochłonności oraz kosztochłonności, jakiej wymaga przeprowadzanie pomiarów rozkładów widmowych (SPD) LED-ów pracujących w różnych temperaturach, pożądanym jest możliwość zamodelowania tych pomiarów w szerokim zakresie temperatur pracy. Bazując na modelowaniu SPD białych LED-ów metodą superpozycji Gaussa przeprowadzono analizę dokładności tej metody w wyznaczaniu ich parametrów fotometrycznych oraz kolorymetrycznych dla różnych temperatur pracy. Wykazano, że wartości parametrów świetlnych dla rozkładu zmierzonego oraz odtworzonego tym modelem są zgodne.

EN

Because of the time- and cost- intensive nature of making spectral distribution (SPD) measurements of LEDs operating at different temperatures, it is desirable to be able to model these measurements over a wide range of operating temperatures. Based on the SPD modeling of white LEDs by the Gauss superposition method, an analysis of the accuracy of this method in determining their photometric and colorimetric parameters for different operating temperatures was conducted. It was shown that the values of light parameters for the distribution measured and modeled by this model are consistent.

Słowa kluczowe

PL

źródło LED światła białego; rozkład widmowy; SPD; model superpozycji Gaussa; metryka dopasowania

EN

white light LED source; spectral distribution; SPD; Gaussian superposition model; matching metric

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2022
• Tom: R. 98, nr 6
• Strony: 57--61
• Opis fizyczny: Bibliogr. 43 poz., rys., tab.

Twórcy

autor

Listowski Maciej

• Politechnika Białostocka, Wydział Elektryczny, Katedra Fotoniki, Elektroniki i Techniki Świetlnej, ul. Wiejska 45D, 15-352 Białystok

• https://orcid.org/0000-0001-5951-4098

Bibliografia

• [1] Zheludev N., The life and times of the LED - A 100-year history, Nature Photonics, Vol. 1 (2007), 189-192
• [2] Muthu S., Schuurmans F. J. P., Pashley M. D., Red, Green, and Blue LEDs for White Light Illumination, IEEE Journal On Selected Topics In Quantum Electronics, Vol. 8 (2002), No. 2, 333-338
• [3] Muthu S., Schuurmans F. J., Pashley M. D., Red, Green, and Blue LED based white light generation: Issues and control, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting, 327-333, [doi: 10.1109/IAS.2002.1044108]
• [4] Steigerwald D. A., Bhat J. C., Collins D., Fletcher R. M., Holcomb M. O., Ludowise M. J., Martin P. S., Rudaz S. L., Illumination With Solid State Lighting Technology, IEEE Journal On Selected Topics In Quantum Electronics, Vol. 8 (2002), No. 2, 310-320
• [5] Sheu J. K., Chang S. J., Kuo C. H., Su Y. K., Wu L. W., Lin Y. C., Lai W. C., Tsai J. M., Chi G. C., Wu R. K., White-Light Emission From Near UV InGaN–GaN LED Chip Precoated With Blue/Green/Red Phosphors, IEEE Photonics Technology Letters, Vol. 15 (2003), No. 1, 18-20
• [6] Nishida T., Ban T., Kobayashi N., High-color-rendering light sources consisting of a 350-nm ultraviolet light-emitting diodeand three-basal-color phosphors, Applied Physics Letters, Vol. 82 (2003), No. 22, 3817-3819
• [7] Nakamura S., Growth of InxGa(1-x)N compound semiconductors and high-power InGaN/AIGaN double heterostructure violet-light-emitting diodes, Microelectronics Journal, Vol.25 (1994), 651-659
• [8] Bado K., Sakano K., Noguchi Y., Shimizu Y., Development of High-bright and Pure-white LED Lamps, Journal of Light & Visual Environment, Vol.22 (1998), No.1, 2-5
• [9] Cho J., Park J. H., Kim J. K., Schubert E. F., White light-emitting diodes: History, progress, and future, Laser&Photonics Reviews, Vol.11 (2017) , Issue 2, 1-17
• [10] Ohno Y., Practical Use and Calculation of CCT and Duv, LEUKOS: The Journal of the Illuminating Engineering Society of North America, Vol.10 (2014), 47-55
• [11] Fryc I., Fryc J., Wąsowski K. A., Considerations about determining color rendering of light sources, Przegląd Elektrotechniczny, 92 (2016), nr 2, 218-223
• [12] Fryc I., Fryc J., Jakubowski P., Wąsowski K. A., Technical, medical and legal aspects of domestic light sources photobiological safety, Przegląd Elektrotechniczny, 93 (2017), nr 3, 232-237
• [13] Kowalska J., Analysis of parameters describing the quality of the color rendering of light sources according to the IES TM-30-15 and the CIE 013.3-1995, Przegląd Elektrotechniczny, 93 (2017), nr 6, 50-54
• [14] Huang Z., Liu Q., Luo M. R., Pointer M. R., Liu Y., Wang Y., Wu X., Whiteness and preference perception of white light sources: A case study at 5500 K with positive and negative Duv values, Optik – International Journal for Light and Electron Optics, Vol. 240 (2021), 1-10
• [15] Fryc I., The spectral power distribution of LED driven by square shape pulses, Przegląd Elektrotechniczny, 88 (2012), nr 6, 131-133
• [16] Fryc I., Prorok M., White LED performance analyzed under their different working conditions, Przegląd Elektrotechniczny, 89 (2013), nr 8, 274-276
• [17] Fryc I., Jakubowski P., Kołacz K., Analysis of optical radiation parameters of compact discharge HID lamps and LED COB modules used for illuminating shop windows, Przegląd Elektrotechniczny, 93 (2017), nr 11, 186-189
• [18] Jakubowski P., Kowalska J., Supronowicz R., Fryc I., The Influence of Spectral Measurements Uncertainty of Fluorescent Lamps on Calculated Value of their Relative Melanopic Weighted Irradiance and Colour Quality Parameters, VII Lighting Conference of the Visegrad Countries LUMEN V4 (2018), [doi: 10.1109/LUMENV.2018.8520975]
• [19] Ye Z.-T., Chang C., Juan M.-C., Chen K.-J., Luminous Intensity Field Optimization for Antiglare LED Desk Lamp without Second Optical Element, Applied Sciences, Vol.10 (2020), 1-13
• [20] Kubiak K., Shaping reflector for asymmetric LED floodlighting reflector, Przegląd Elektrotechniczny, 94 (2018), nr 2, 128-133
• [21] Fryc I., Tabaka P., The night sky light pollution created by outdoor luminaires, Przegląd Elektrotechniczny, 93 (2017), nr 6, 46-49
• [22] Czyżewski D., Comparison of luminance distribution on the lighting surface of power LEDs, Photonics Letters of Poland, Vol. 11(4) (2019), 118-120
• [23] Czyżewski D., Selected problems of defining the luminous area of electroluminescent diodes, Przegląd Elektrotechniczny, 84 (2008), nr 8, 125-128
• [24] Czyżewski D., Luminance distribution of LED luminous surface, Przegląd Elektrotechniczny, 86 (2010), nr 10, 166-169
• [25] Tyukhova Y., Waters C., An Assessment of High Dynamic Range Luminance Measurements with LED Lighting, LEUKOS: The Journal of the Illuminating Engineering Society of North America, Vol.10 (2014), 87-99
• [26] Fryc I., Measurement techniques of optical LEDs propertiesperformed with compliance conformity with CIE 127:2007 standard, Przegląd Elektrotechniczny, 85 (2009), nr 11, 317-319
• [27] Mozyrska D., Wyrwas M., Fryc I., The determination of the LEDs colorimetric parameters, in the range of their operating temperature, Przegląd Elektrotechniczny, 88 (2012), nr 4a, 232-234
• [28] Bonisławski, K. , Fryc, I., The study on optical properties of LEDs used for vehicle control lighting, Przegląd Elektrotechniczny, 88 (2012), nr 3a, 119-120
• [29] Czech E., Fryc I., Power control method of color LEDs based luminaries, emitting constant light output, independent from the conditions of its operating environment, Przegląd Elektrotechniczny, 90 (2014), nr 1, 270-272
• [30] Gu Y., Narendran N., A Non-contact Method for Determining Junction Temperature of Phosphor-Converted White LEDs, Third International Conference On Solid State Lighting, Vol. 5187 (2004), 107-114 [doi: 10.1117/12.509751]
• [31] Chhajed S., Xi Y., Li Y. L., Gessmann T., Schubert F. F., Influence of junction temperature on chromaticity and color-rendering properties of trichromatic white-light sources based on light-emitting diodes, Journal of Applied Physics, 97 (2005), 1-8
• [32] Ryu G.-H., Byungjin M., Ryu H.-Y., Temperature dependence of the color rendering index of a phosphor-conversion white light-emitting diode, AIP Advances, Vol.9 (2019), Issue 1, [doi: 10.1063/1.5066351]
• [33] Mozyrska D., Fryc I., Approximation of spectroradiometric data by fractional model, Przegląd Elektrotechniczny, 87 (2011), nr 2, 255-257
• [34] Supronowicz R., Fryc I., The LED spectral power distribution modelled by different functions - how spectral matching qualityaffected computed LED color parameters, 2019 Second Balkan Junior Conference on Lighting (Balkan Light Junior) (2019),1-4, [doi: 10.1109/BLJ.2019.8883564]
• [35] Zheng R., Luminous Efficiency and Color Rendering of Phosphor-Converted White LEDs, Journal of Light & Visual Environment, Vol.32 (2008), 230-233
• [36] Fan J., Chen W., Yuan W., Fan X., Zhang G., Dynamic prediction of optical and chromatic performances for a light-emitting diode array based on a thermal-electrical-spectral model, Optics Express, Vol.28 (2020), 13921-13937
• [37] Schneider T., Dekker P., Young R., Blattner P., Poikonen T.,Extrapolation of phosphor converted white LED spectra beyond the visible wavelength range, Proceedings of the 29th CIE SESSION Washington D.C., USA, June 14 – 22, (2019), 1229-1237, [doi:10.25039/x46.2019.PO105]
• [38] Imai F. H., Rosen M. R., Berns R. S., Comparative Study ofMetrics for Spectral Match Quality, CGIV 2002: The First European Conference on Colour in Graphics, Imaging, and Vision
• [39] Chang C., Spectral information divergence for hyperspectral image analysis, IEEE 1999 International Geoscience and Remote Sensing Symposium. IGARSS'99, (1999), 509-511
• [40] Shrestha R., Pillay R., George S., Hardeberg J. Y., Quality Evaluation in Spectral Imaging – Quality Factors and Metrics, Journal of the International Colour Association, 12 (2014), 22-35
• [41]CIE TN 001:2014 Chromaticity Difference Specification for Light Sources
• [42] Pązik R., Zawisza K., Watras A., Maleszka-Bagińska K., Boutinaud P., Majiou R., Dereń J.P., Thermal quenching mechanisms of the Eu3+ luminescence in Ca9Al(PO4)7 obtained by citric route, Materials Research Bulletin, 48 (2013), 337-342
• [43] Supronowicz R., Fan J., Listowski M., Watras A., Fryc I., Application of different metrics for describing light color quality of a white LED, Photonics Letters of Poland, Vol. 13 (2) (2021), 31-33

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).