New method for determination of adjustment corrections for crane rail axes

• Autorzy: Kamiński W.

Identyfikatory

DOI

10.2478/rgg-2013-0006

• Języki publikacji: EN

Abstrakty

EN

Electronic tacheometers are currently a standard instrument used in geodetic work, including also geodetic engineering measurements. One of the many applications of tacheometers in engineering geodesy are 3D control measurements of crane rail axes. This paper proposes a new method of computing adjustment corrections for crane rail axes based on 3D polar measurements performed with an electronic tacheometer. The intermediary method with conditions on parameters was used in the solution of the problem. The theoretical discussion was complemented with an example application on simulated results of observations. The obtained results confirmed the theoretical assumptions and encourage the verification of the presented proposal on practical examples.

Słowa kluczowe

EN

crane rail; 3D control measurements; adjustment with conditions

PL

dźwig kolejowy; pomiary kontrolne 3D

• Wydawca: Wydział Geodezji i Kartografii Politechniki Warszawskiej
• Czasopismo: Reports on Geodesy
• Rocznik: 2013
• Tom: z. 1/94
• Strony: 47--55
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Kamiński W.

• Institute of Geodesy, University of Warmia and Mazury, Olsztyn, Poland

Bibliografia

• 1. Baran L. W., 1999, Theoretical basis for analysis of geodetic survey results, Polish Scientific Publishers PWN SA, Warsaw.
• 2. Bryś H., Ćmielewski K., Kowalski K., 2009, Control measurements of geometry at location of crane carriage wheels: tolerance – method of measurements instrumentarium, Reports on Geodesy No. 2 (87), 2009, 47-55.
• 3. Gocał J., 2010, Engineering and industrial geodesy. Part III, AGH University of Science and Technology Press, Cracow.
• 4. Grala M., Kopiejewski G., 2003, Engineering Geodesy. Selected Branches, UWM Press, Olsztyn.
• 5. Janusz W., 1993, Detection of crane bridge skews and twists under dynamic conditions, Papers of the Institute of Geodesy and Cartography Volume XI, Issue 1(88).
• 6. Kovanič L., Gašinec J., Kovanič L., Lechman P., 2010, Geodetic surveying of crane trail space relations, Acta Montanistica Slovaca, Ročnik 15, čislo 3, 188-199.
• 7. Osada E., 2002, Geodesy. Electronic textbook in Mathcad 2001i, 2nd extended edition, Wrocław University of Technology Press, Wrocław.
• 8. Wiśniewski Z., 2005, Adjustment calculus in geodesy (with examples), UWM Press, Olsztyn.
• 9. Multi-author work, Engineering Geodesy Vol. II, 2nd changed edition, PPWK (Polish Cartographic Publishing House), Warsaw-Wrocław.