Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
A rotating disk can be considered a basic configuration for the investigations of the impact of various conditions on the flow through the clearance between the shrouded turbine blade and the casing. Numerical calculations using Fine/Turbo Numeca were conducted to examine the influence of the rotational velocity and the pressure difference across the disk on the flow conditions, especially the mass flow through the clearance. The results were validated using the experimental data. Moreover, the flow field was investigated to reveal the vortices induced in the flow. The calculations showed a significant drop of the mass flow with a rise of the rotation velocity. Additionally, the vortex created upstream of the disk at higher rotation velocities was observed. The phenomenon of separation at the edge of the disk was investigated.
Słowa kluczowe
Wydawca
Rocznik
Tom
Strony
89--100
Opis fizyczny
Bibliogr. 10 poz., rys., tab.
Twórcy
autor
- Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk, Poland
- Interdepartmental PhD Studies at the Gdansk University of Technology, Narutowicza 11/12, 80–233 Gdansk, Poland
autor
- Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk, Poland
autor
- Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk, Poland
Bibliografia
- [1] Puzyrewski R and Jakubek A 1989 Prace Instytutu Maszyn Przepływowych 89
- [2] Puzyrewski R and Jakubek A 1991 Prace Instytutu Maszyn Przepływowych 93
- [3] Booth T C, Dodge P R and Hepworth H K 1982 ASME J. Turbomachinery 104 154
- [4] Hofer T, Legrand M, Pons L and Arts T 2009 ASME Turbo Expo 2009: Power for Land, Sea, and Air, Turbomachinery, Parts A and B, Orlando, Florida, USA, 7
- [5] Kanjirakkad V et al. 2008 ASME J. Turbomachinery 130 (1)
- [6] Pfau A, Trieber M, Sell M and Gymrathy G 2000 ASME Paper No. 2000-GT-0481
- [7] Wallis A M, Denton J D and Demargne A A J 2000 ASME Paper No. 2000-GT-0475
- [8] Lehmann K, Thomas R, Hodson H and Stefanis V ASME Turbo Expo 2009: Power for Land, Sea, and Air, Heat Transfer, Parts A and B, Orlando, Florida, USA, 3
- [9] Stephens J 2009 Control of the tip-gap flow of a low pressure turbine blade in a linear cascade, PhD thesis, University of Notre Dame
- [10] Spalart P R and Allmaras S R 1992 AIAA Paper 92–0439
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-b59158a0-7851-4e8a-aafc-52bcb037f0e5