Modelling the concentration and dimensional changes in the structural constituents of vermicular graphite cast iron on cooling within the range of solidus-eutectoid temperature

• Autorzy: Kapturkiewicz W. , Burbelko A. A. , Fraś E.
• Języki publikacji: EN

Abstrakty

EN

A mathematical model and a simulation program have been developed to trace changes in the structure of Fe-C alloy on cooling from the solidus temperature to the temperature of eutectoid transformation. A simplified schematic representation of the process can be referred to the cast iron with vermicular graphite. The numerical experiments using the newly developed program have proved a significant effect of the cooling conditions and structure refinement degree (the dimensions of austenite) on the concentration field in austenite and, consequently, on the dimensional changes of graphite within the examined cooling range. The developed methods of modelling the process of transformation enable including the procedure into a complex software operating in a system reproducing in real manner the casting configuration, while the obtained results indicate an important effect of thermophysical parameters and heat transfer process on final alloy structure.

Słowa kluczowe

EN

modelling method; cast iron; solid state; graphite; austenite

PL

metoda modelowania; żeliwo; stan stały; grafit; austenit

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 1 spec.
• Strony: 179--182
• Opis fizyczny: Bibliogr. 17 poz., rys., wykr.

Twórcy

autor

Kapturkiewicz W.

• Faculty of Foundry Engineering, AGH University of Science and Technology, Reymonta 23, 30-059 Kraków, Poland

autor

Burbelko A. A.

• Faculty of Foundry Engineering, AGH University of Science and Technology, Reymonta 23, 30-059 Kraków, Poland

autor

Fraś E.

• Faculty of Foundry Engineering, AGH University of Science and Technology, Reymonta 23, 30-059 Kraków, Poland

Bibliografia

• [1] C. Podrzucki, Cast Iron. Structure, properties, application, ZG STOP, Kraków (1991) (in Polish).
• [2] E. Guzik, Processes of cast iron improvement, PAN, Katowice (2001).
• [3] M. Lampic, Eine neue Chance fur Gusseisen mit Vermiculargraphit, Giesserei, vol. 79, No. 21 (1992) 872-878.
• [4] T. Sjorgen, P. Vomacka, L. Svensson, Comparison of mechanical properties in flake and compacted graphite cast irons for piston rings, Int. J. Cast Met. Res., v. 17, No. 2 (2004) 65-71.
• [5] C. Elliot.: Current Status of Austempered Cast Irons. Advanced Materials Res. v. 4-5, (1997) 1-16.
• [6] J.M. Uilemany, N. Llorca-Isern: Mechanism of bainitic transformation in compacted graphite cast iron. Met. Trans. A, vol. 21A (1990) 895-899.
• [7] L.M. Chou, M.H. Hon, L.L. Lee Affects of graphite morphology and matrix structure on mechanical properties. J. Mat. Science, vol. 25 (1990) 1965-1972.
• [8] H. Bayati, A.L. Rimer, R. Elliot: The austempering kinetics and Processing window in an austempered, low-manganese compacted-graphite cast iron. Cast Metals, No 1 (1994) 11-24.
• [9] H. Bayati, A.L. Rimer, R. Elliot: The influence of austenitizing temperature on the kinetics and processing window of a low-manganese compacted-graphite cast iron. Cast Metals, No 2 (1994) 89-102.
• [10] R. Gregorutti, K.F. Laneri, J. Desimoni, R.C. Mercader, Study of austempering transformation kinetics in compacted graphite cast iron. Mater. Trans. A, vol. 35A (2004) 103-110.
• [11] J.L. Garin, R.L. Mannheim.: Microstructural characterization of ADI and AVI alloys by means of Rietveld analysis. Z. Metalik., vol. 91, No 10, (2000) 842-847.
• [12] S.M. Yoo, K. Moeinipour, A. Ludwig, P.R. Sahm, Numerical simulation and experimental results of in situ heat treated austempered ductile iron. Int. J. Cast Metals Res., 11, (1999) 483-488.
• [13] R.C. Thomson, J.S. James, D.S. Putman: Modelling microstructural evolution and mechanical properties of austempered ductile iron, Cast Metals, 16, (2000) 1412-1419.
• [14] W. Kapturkiewicz, A.A. Burbelko, J. Lelito, E. Fraś, Modelling of ausferrite growth in ADI. Int. J. Cast Met. Res.. vol. 16, no 1-3 (2003) 287-293.
• [15] W. Kapturkiewicz, Modelling of kinetics of austenitization of pearlitic cast iron, Archives of Foundry, vol. 4 (2004) 203- 208 (in Polish).
• [16] http://www.clasguss.de.
• [17] W. Kapturkiewicz, Modelling of solidification of cast iron, AKAPIT, Kraków (2003) (in Polish).