Efficiency comparison of mixture formulations in the stabilisation/solidification of the loess silt contaminated with zinc in terms of mechanical properties

• Autorzy: Lal Agnieszka , Fronczyk Joanna , Franus Małgorzata

Identyfikatory

DOI

10.35784/bud-arch.3407

• Języki publikacji: EN

Abstrakty

EN

The effectiveness of various types of binders in stabilizing/solidifying (S/S) contaminated soils is strongly dependent on the type of soil and contaminants present. The literature abounds with studies of stabilisation/solidification of clayey soils, which provides a background for initial assumptions in design of the method application for contamination of this type of soil. However, studies on the stabilisation/solidification of loess silt contaminated with heavy metals are not available. Filling this deficiency is important in order to ensure the rapid adoption of the most effective remedies in case of contamination and their immediate implementation in the subsoil. This paper has enabled the determination of the most effective mixture among the examined for the remediation of loess silt contaminated with zinc in terms of compressive strength. Strengths were determined with the implementation of 30% Portland cement (2.63 MPa), 30% of fly ash-cement mixture (2.21 MPa), an incinerated sewage sludge ash-cement mixture (0.93 MPa) and mixtures in which cement was replaced by an MgO activator (0.18 MPa for fly ash and 0.63 MPa for incinerated sewage sludge ash). In addition, the determination of strength was carried out for samples containing a mixture of fly ash, activator and cement (0.26 MPa) and incinerated sewage sludge ash, activator and cement (0.26 MPa), with weight ratios of 5:4:1 respectively. In summary, fly ash and cement in a 2:1 ratio can be considered the most effective binding mix in terms of unconfined compressive strength increase.

Słowa kluczowe

EN

loess silt; alternative binder; activator; unconfined compressive strength

• Wydawca: Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Budownictwo i Architektura
• Rocznik: 2023
• Tom: Vol. 22, no 1
• Strony: 25--35
• Opis fizyczny: Bibliogr. 42 poz., fig., tab.

Twórcy

autor

Lal Agnieszka

• Department of Building Materials Engineering and Geoengineering; Faculty of Civil Engineering and Architecture; Lublin University of Technology; Poland

• https://orcid.org/0000-0002-3557-6064

autor

Fronczyk Joanna

• Department of Revitalization and Architecture; Institute of Civil Engineering; Warsaw University of Life Sciences—SGGW Poland

• https://orcid.org/0000-0001-5963-7813

autor

Franus Małgorzata

• Department of General Construction; Faculty of Civil Engineering and Architecture; University of Lublin University Technology Poland

• https://orcid.org/0000-0003-2317-4196

Bibliografia

• 1. Jin F. et al., “Three-year performance of in-situ solidified/stabilised soil using novel MgO-bearing binders,” Chemosphere, vol. 144, (Feb. 2016), pp. 681–688. https://doi.org/10.1016/j.chemosphere.2015.09.046
• 2. Voglar G. E. and Leštan D., “Efficiency modeling of solidification/stabilization of multi-metal contaminated industrial soil using cement and additives,” Journal of Hazardous Materials, vol. 192, no. 2, (Aug. 2011), pp. 753–762. https://doi.org/10.1016/J.JHAZMAT.2011.05.089
• 3. Scanferla P. et al., “An innovative stabilization/solidification treatment for contaminated soil remediation: Demonstration project results,” Journal of Soils and Sediments, vol. 9, no. 3, (2009), pp. 229–236. https://doi.org/10.1007/s11368-009-0067-z
• 4. Palansooriya K. N. et al., “Soil amendments for immobilization of potentially toxic elements in contaminated soils: A critical review,” Environment International, vol. 134, no. June 2019, (2020), p. 105046. https://doi.org/10.1016/j.envint.2019.105046
• 5. Janiszewska S. et al., “Przegląd metod oczyszczania gruntów i wód gruntowych in-situ,” Przeglad Geologiczny, vol. 65, no. 10, (2017), pp. 908–915.
• 6. Alzhanova G. Z. et al., “Development of Environmentally Clean Construction Materials Using Industrial Waste,” Materials, vol. 15(16), 2022, p. 5726. https://doi.org/10.3390/ma15165726
• 7. Navarro A. et al., “Immobilization of Cu, Pb and Zn in mine-contaminated soils using reactive materials,” Journal of Hazardous Materials, vol. 186, no. 2–3, 2011, pp. 1576–1585. https://doi.org/10.1016/J.JHAZMAT.2010.12.039
• 8. Saadeldin R. and Siddiqua S., “Geotechnical characterization of a clay–cement mix,” Bulletin of Engineering Geology and the Environment, vol.72, 2013, pp. 601–608. https://doi.org/10.1007/s10064-013-0531-2
• 9. Sun Y. et al., “The Effects of Portland and Sulphoaluminate Cements Solidification/ Stabilization on Semi-Dynamic Leaching of Heavy Metal from Contaminated Sediment,” Sustainability, vol. 14, 2022, 5681. https://doi.org/10.3390/su14095681.
• 10. Means J. et al., Application of Solidification and Stabilization to Waste Materials. CRC-Press, 1995.
• 11. Bone B. D. et al., "Review of scientific literature on the use of stabilisation / solidification for the treatment of contaminated soil , solid waste and sludges", CLaIRE Guidance Bulletin Gualdlince, no. 1, January 2004, pp. 1-8. https://doi.org/10.13140/2.1.1055.6163
• 12. Guo B. et al., “The mechanisms of heavy metal immobilization by cementitious material treatments and thermal treatments : A review,” Journal of Environmental Management, vol. 193, 2017, pp. 410–422. https://doi.org/10.1016/j.jenvman.2017.02.026
• 13. Sharma H. D. and Reddy K. R., “Geoenvironmental Engineering: Site Remediation, Waste Containment, and Emerging Waste Management Technologies,” Environment International, vol. 35, 2004, pp. 50–55.
• 14. Batchelor B., “Overview of waste stabilization with cement,” Waste Management, vol. 26, no. 7, 2006, pp. 689–698. https://doi.org/10.1016/j.wasman.2006.01.020
• 15. Roy A. et al., “Solidification/stabilization of a heavy metal sludge by a Portland cement/fly ash binding mixture,” Hazardous Waste and Hazardous Materials, vol. 8, no. 1, 1991, pp. 33–41. https://doi.org/https://doi.org/10.1089/hwm.1991.8.33
• 16. Lin S. L. et al., “Stabilization and solidification of lead in contaminated soils,” Journal of Hazardous Materials, vol. 48, no. 1–3, Jun. 1996, pp. 95–110. https://doi.org/10.1016/0304-3894(95)00143-3
• 17. Sanchez F. et al., “Leaching of inorganic contaminants from cement-based waste materials as a result of carbonation during intermittent wetting,” Waste Management, vol. 22, no. 2, Jan. 2002, pp. 249–260. https://doi.org/10.1016/S0956-053X(01)00076-9
• 18. Yilmaz O. et al., “Comparison of Two Leaching Tests to Assess the Effectiveness of Cement-Based Hazardous Waste Solidification/Stabilization,” Turkish Journal of Engineering and Environmental Sciences, vol. 27(3), 2003, pp. 201-212.
• 19. Shawabkeh R. A., “Solidification and stabilization of cadmium ions in sand–cement–clay mixture,” Journal of Hazardous Materials, vol. 125, no. 1–3, Oct. 2005, pp. 237–243. https://doi.org/10.1016/J.JHAZMAT.2005.05.037
• 20. Moon D. H. et al., “An assessment of Portland cement, cement kiln dust and class C fly ash for the immobilization of Zn in contaminated soils,” Environmental Earth Sciences, vol. 61, no. 8, 2010, pp. 1745–1750. https://doi.org/10.1007/s12665-010-0596-1
• 21. Voglar G. E. and Leštan D., “Solidification/stabilisation of metals contaminated industrial soil from former Zn smelter in Celje, Slovenia, using cement as a hydraulic binder,” Journal of Hazardous Materials, vol. 178, no. 1–3, Jun. 2010, pp. 926–933. https://doi.org/10.1016/J.JHAZMAT.2010.02.026
• 22. Kogbara R. B. et al., “Process Envelopes For Stabilised/Solidified Contaminated Soils: initiation work,” in Fifth International Conference on Environmental Science and Technology, Houston, Texas, USA, 2010. https://doi.org/10.13140/2.1.3481.7608
• 23. Kogbara R. B. et al., “PH-dependent leaching behaviour and other performance properties of cement-treated mixed contaminated soil,” Journal of Environmental Sciences (China), vol. 24, no. 9, Sep. 2012, pp. 1630–1638. https://doi.org/10.1016/S1001-0742(11)60991-1
• 24. Tariq A. and Yanful E. K., “A review of binders used in cemented paste tailings for underground and surface disposal practices,” Journal of Environmental Management, vol. 131, 2013, pp. 138–149. https://doi.org/10.1016/j.jenvman.2013.09.039
• 25. Du Y. J. et al., “Effect of acid rain pH on leaching behavior of cement stabilized lead-contaminated soil,” Journal of Hazardous Materials, vol. 271, Apr. 2014, pp. 131–140. https://doi.org/10.1016/J.JHAZMAT.2014.02.002
• 26. Wei M.-L. et al., “Effects of freeze-thaw on characteristics of new KMP binder stabilized Zn- and Pb-contaminated soils,” Environmental Science and Pollution Research, vol. 22, 2015, pp. 19473–19484. https://doi.org/10.1007/s11356-015-5133-z
• 27. Perera A. and Al-Tabbaa A., “Stabilisation/Solidification Treatment and Remediation,” in Stabilisation/Solidification Treatment and Remediation, 23rd ch., 2005, pp. 181–191. https://doi.org/10.1201/9781439833933.ch23
• 28. Wang L. et al., “Recycling contaminated wood into eco-friendly particleboard using green cement and carbon dioxide curing,” Journal of Cleaner Production, vol. 137, Nov. 2016, pp. 861–870. https://doi.org/10.1016/J.JCLEPRO.2016.07.180
• 29. Morales L. et al., “Microbiological induced carbonate (CaCO3) precipitation using clay phyllites to replace chemical stabilizers (cement or lime),” Applied Clay Science, vol. 174, 2019, pp. 15–28. https://doi.org/10.1016/j.clay.2019.03.018
• 30. Mujah D. et al., “Microstructural and Geomechanical Study on Biocemented Sand for Optimization of MICP Process,” Journal of Materials in Civil Engineering, vol. 31, no. 4, 2019. https://doi.org/10.1061/(asce)mt.1943-5533.0002660
• 31. Scrivener K. L. and Kirkpatrick R. J., “Innovation in use and research on cementitious material,” Cement and Concrete Research, vol. 38, no. 2, Feb. 2008, pp. 128–136. https://doi.org/10.1016/J.CEMCONRES.2007.09.025
• 32. Li W. et al., “Comparison of reactive magnesia, quick lime, and ordinary Portland cement for stabilization/solidification of heavy metal-contaminated soils,” Science of the Total Environment, vol. 671, 2019, pp. 741–753. https://doi.org/10.1016/j.scitotenv.2019.03.270
• 33. Kogbara R. B. et al., “Cement–fly ash stabilisation/solidification of contaminated soil: Performance properties and initiation of operating envelopes,” Applied Geochemistry, vol. 33, no. 2013, Jun. 2013, pp. 64–75. https://doi.org/10.1016/j.apgeochem.2013.02.001
• 34. Akhter H. et al., “Immobilization of As, Cd, Cr and PB-containing soils by using cement or pozzolanic fixing agents,” Journal of Hazardous Materials, vol. 24, no. 2–3, Jan. 1990, pp. 145–155. https://doi.org/10.1016/0304-3894(90)87006-4
• 35. Kong R. et al., “Stabilization of Loess Using Nano-SiO2,” Materials, vol. 11, no. 6, Jun. 2018, p. 1014. https://doi.org/10.3390/ma11061014
• 36. Ma Y. and Chen W., “Study on the Mechanism of Stabilizing Loess with Lime: Analysis of Mineral and Microstructure Evolution,” Advances in Civil Engineering, vol. 2021, May 2021, pp. 1–11. https://doi.org/10.1155/2021/6641496
• 37. Liu Z. et al., “Feasibility Study of Loess Stabilization with Fly Ash–Based Geopolymer,” Journal of Materials in Civil Engineering, vol. 28, no. 5, (2016), pp. 1–8. https://doi.org/10.1061/(asce)mt.1943-5533.0001490
• 38. Nepelski K. and Lal A., “CPT parameters of loess subsoil in Lublin area,” Applied Sciences, vol. 45, 2021, pp. 1–13. https://doi.org/10.3390/app11136020
• 39. ASTM, “ASTM, 2006. Annual Book of ASTM Standards, 04.08. American Society for Testing and Materials, Philadelphi,” ASTM International, vol. 04, 2000, pp. 1–12.
• 40. Erdem M. and Özverdi A., “Environmental risk assessment and stabilization/solidification of zinc extraction residue: II. Stabilization/solidification,” Hydrometallurgy, vol. 105, no. 3–4, 2011, pp. 270–276. https://doi.org/10.1016/j.hydromet.2010.10.014
• 41. Goodarzi A. R. and Movahedrad M., “Stabilization/solidification of zinc-contaminated kaolin clay using ground granulated blast-furnace slag and different types of activators,” Applied Geochemistry, vol. 81, 2017, pp. 155–165. https://doi.org/10.1016/j.apgeochem.2017.04.014
• 42. Zhou Y. et al., “A combination method to study microbial communities and activities in zinc contaminated soil,” Journal of Hazardous Materials, vol. 169, no. 1–3, Sep. 2009, pp. 875–881. https://doi.org/10.1016/j.jhazmat.2009.04.027