The influence of supply options of an asynchronous electric motor on emitted noise

• Autorzy: Barczewski R. , Jakubek B. , Wróbel M.
• Języki publikacji: EN

Abstrakty

EN

A comparison of the noise emitted by an asynchronous electric motor for various supply options has been presented in this paper. The star connection, one phase connection (with a run capacitor) and the use of an inverter have been taken under consideration. The test results show the effect of supply options of the electric motor on the sound power level, the shape of the noise spectra and directivity changes of the sound emitted by the tested asynchronous electric motor.

Słowa kluczowe

EN

asynchronous electric motor; noise; motor connection

PL

elektryczny silnik asynchroniczny; hałas; podłączenie silnika

• Wydawca: Poznan University of Technology. Institute of Applied Mechanics
• Czasopismo: Vibrations in Physical Systems
• Rocznik: 2018
• Tom: Vol. 29
• Strony: art. no. 2018006
• Opis fizyczny: Bibliogr. 11 poz., 1 fot. kolor., rys., wykr.

Twórcy

autor

Barczewski R.

• Poznan University of Technology, Faculty of Mechanical Engineering and Management, 3 Piotrowo St, 60-965 Poznan

autor

Jakubek B.

• Poznan University of Technology, Faculty of Mechanical Engineering and Management, 3 Piotrowo St, 60-965 Poznan

autor

Wróbel M.

• Poznan University of Technology, Faculty of Mechanical Engineering and Management, 3 Piotrowo St, 60-965 Poznan

Bibliografia

• 1. T. Glinka, Diagnozowanie maszyn elektrycznych in Inżynieria diagnostyki maszyn, Ed. B. Żółtowski, C. Cempel, PIB, Radom 2004, 633 - 654.
• 2. A. F. Ohnacker, Maintenence of Electrical Equipment in Maintenance Engineering Handbook Ed. L.R. Higgins, Nowy Jork 1988, 7-1-7-28.
• 3. Directive 2006/42/EC of the European Parliament and of the council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast).
• 4. A. Starr, R. Wynne, A review of condition based maintenance for electrical machines in Handbook of condition monitoring Ed. B. K. N. Rao, Elsevier Advanced Technology, Oxford 1996, 267 - 284.
• 5. P. A. Delgado-Arredondo, D. Morinigo-Sotelo, R. A. Osornio-Rios et al., Methodology for fault detection in induction motors via sound and vibration signals, Mechanical Systems and Signal Processing, 83 (2017) 568 - 589.
• 6. M. Serrazin, S. Gillijns, K. Janssens, et al., Vibro-acoustic measurements and techniques for electric automotive applications, Proceedings of 43rd International Congress on Noise Control Engineering inter.noise 2014, 5128 - 5137.
• 7. C. Cempel, Podstawy wibroakustycznej diagnostyki maszyn, Wydawnictwo Naukowo Techniczne, Warszawa 1982, 203 - 207.
• 8. R. Barczewski, B. Jakubek, Problems of in-situ vibroacoustic testing of low-vibroactive devices, Journal of Vibrations in Physical Systems, 25 (2012) 59 - 64.
• 9. C. Cempel, Wibroakustyka stosowana, PWN, Warszawa 1989, 91 - 92.
• 10. H. P. Bloch, F. K. Geitner, Practical Machinery management for process plants Volume 2 Machinery Failure Analysis and Troubleshooting, Gulf Publishing Company, Huston 1983, 280 - 285.
• 11. ISO 3746 : 2011, Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).