Investigation and prevention of the residues formed in melting furnaces and transfer ladles used in low-pressure Al-casting technologies

• Autorzy: Yay B. , Akinci E. , Güneren A. , Karaali U. , Çubuklusu H. E. , Çe B.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Refractory life, in Al-casting processes such as alloy wheel production, is obviously affected by the inclusions formed in the transfer ladles and holding/melting furnaces in which melting, fluxing and degassing operations are carried out. The short refractory life affects, adversely, the economical aspect of the process. Therefore, a study on the physical and chemical properties of the above mentioned inclusions has been started. The main purpose of the study is to understand the relationships among the metallurgical processes taking place during casting, properties of the refractories used and the formation of inclusions. Design/methodology/approach: During this industry-university joint study, experimental studies using scanning electron microscopy (SEM), X-ray diffractometry (XRD) and optical microscopy were used to investigate the nature and properties of the inclusions. Also, corrosion behaviour of six different refractories was investigated by exposing them to molten aluminium.

Słowa kluczowe

EN

aluminium alloy; A356; residue; corundum; refractories

PL

stop aluminium; A356; surowiec odpadowy; korund; materiały ogniotrwałe

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2016
• Tom: Vol. 78, nr 1
• Strony: 5--10
• Opis fizyczny: Biblioggr. 5 poz., rys., tab.

Twórcy

autor

Yay B.

• Lodos Teknik A.Ş., Kemalpaşa, Izmir, Turkey

autor

Akinci E.

• Lodos Teknik A.Ş., Kemalpaşa, Izmir, Turkey

autor

Güneren A.

• CMS Jant ve Makina Sanayii A.Ş., Izmir, Turkey

autor

Karaali U.

• Dokuz Eylül Üniversitesi Metalurji ve Malzeme Mühendisliği, Izmir, Turkey

autor

Çubuklusu H. E.

• CMS Jant ve Makina Sanayii A.Ş., Izmir, Turkey

autor

Çe B.

• CMS Jant ve Makina Sanayii A.Ş., Izmir, Turkey

Bibliografia

• [1] M. Çolak, R. ve Kayıkcı, The Effect of Electromagnetic Stirring on the Microstructural and Mechanical Properties of A356 Casting Alloy, Sakarya Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Cilt 15/3 (2009) 345-351.
• [2] H. Hasırcı, F. Gül, Üretim artlarının Yerçekimine Ters Döküm Yöntemiyle Üretilen Parçaların Yapı Ve Mekanik Özelliklerine EtkileriGazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Journal of the Faculty of Engineering and Architecture of Gazi University 21/2 (2006) 257-264.
• [3] S. Quesnel, C. Allaire, S. Afshar, Criteria for Choosing Refractories In Aluminium Holding And Melting Furnace, TMS Proceedings, 1998, 1391-1402.
• [4] C. Allaire, M. Guermazi, The Corrosion of Furnace Refractories by Molten Aluminum, Department of Engineering Physics and Materials Engineering Ecole Polytechnique of Montreal, Canada, 1998.
• [5] R.W. Jackson, The Effect of Reactıon And Infıltratıon on the Degradatıon of Refractory Ceramıcs By Molten Metals, University of Pittsburgh, 2010.