Resource efficiency within semi-continuous production: an approach to assess process-inherent resource dissipation

• Autorzy: Meier H. , Bakir D. , Krückhans B.
• Języki publikacji: EN

Abstrakty

EN

Within classic German manufacturing structures, costs of resources exceed all other cost factors by 46% [1]. Solitary focus on energy or labor costs as sources to raise companies profit no longer seems adequate. Nowadays material costs of the manufacturing industry are about 500 billion euro per year, connected with a saving potential of 100 billion euro per year. Also the belonging for sustainably produced products is raising and becoming a factor for guaranteed purchases [2]. A small and medium-sized enterprise fitted approach, which ensures to increase the transparency of internal process structures and allows a resource driven, ecological and economical assessment, is the main subject of this article.

Słowa kluczowe

EN

resource efficiency enhancement; resource assessment approach; eco accounting; lean manufacturing; manufacturing systems

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2013
• Tom: Vol. 4, No. 4
• Strony: 45--49
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Meier H.

• Ruhr-University Bochum, Faculty of Mechanical Engineering, Chair of Production Systems, Germany

autor

Bakir D.

• Ruhr-University Bochum, Faculty of Mechanical Engineering, Chair of Production Systems, Universitätsstraße 150 - IC 02/735, 44801 Bochum, Germany

autor

Krückhans B.

• Ruhr-University Bochum, Faculty of Mechanical Engineering, Chair of Production Systems, Germany

Bibliografia

• [1] Statistisches Bundesamt: Statistisches Jahrbuch 2012 - Deutschland und Internationales, Wiesbaden, 2012.
• [2] Meier et al., Practical Approach to Analyze and Optimize Energy Efficiency within a Press Hardening Process in Advances, Sustainable and Competitive Manufacturing Systems, S. 1613-1626, Heidelberg, 2013.
• [3] European Commission: Flash Eurobarometer: Attitudes of European entrepreneurs towards ecoinnovation, Brüssel, 2011.
• [4] Bundesministerium für Umwelt, Naturschutz und Reaktorsicherheit: GreenTech made in Germany 3.0 - Umwelttechnologie-Atlas für Deutschland, Berlin, 2012.
• [5] Meier H., Wandlungsfähigkeit durch die Gestaltung modularer Produktionssysteme - Betrachtung von Technik, Organisation und Personal, Intelligent vernetzte Arbeits- und Fabriksysteme, S. 323-332, Chemnitz, 2012.
• [6] Westkämper, Einführung in die Fertigungstechnik, 6 Auflage, Wiesbaden, 2004.
• [7] Böge A., Handbuch Maschinenbau Grundlagen und Anwendungen der Maschinenbau, 27 Auflage, Berlin, 2012.
• [8] Mersch et al., Gemeinsamkeiten und Unterschiede der Prozess- und Fertigungstechnik, Interdisziplinäre Aspekte der Produktionsmodellierung, at-Automatisierungstechnik, H. 1, S. 7-17, München, 2011.
• [9] Bohnet, Mechanische Verfahrenstechnik,Weinheim, 2004.
• [10] Horváth et al., Green Controlling - Bedarf einer Integration von ökologischen Aspekten, Tschandl: Integriertes Umweltcontrolling, Wiesbaden, 2012.
• [11] Eco-Innovation Observatory: The Eco-Innovation Challenge: Pathways to a resource-efficient Europe, Brüssel, 2011.
• [12] Krings, Bewertung und kontinuierliche Verbesserung der Ressourceneffizienz von automatisierten Fertigungssystemen, Aachen, 2012.
• [13] Organisation Intergouvernementale de la Convention du Mètre: The International System of Units (SI), Paris, 2006.