A quick, reliable, and economic method for evaluating the properties of rotor-spun yarn

• Autorzy: Das D. , Ishtiaque S. M. , Mac T. , Veit D. , Gries T.
• Języki publikacji: EN

Abstrakty

EN

An attempt has been made to evaluate the primary and secondary properties of blended rotor-spun yarn both quickly and reliably from only a small sample of fibre. The concept of the quickspin system of yarn production is partially utilised in this research work. The natural and synthetic fibres are blended in a 50/50 ratio according to five different methods on an Uster Micro Dust and Trash Analyser 3 (MDTA 3), and the best blending method is evaluated with the help of a suitable image analysis technique. Furthermore, the reliability of rotor-spun yarns produced from MDTA 3 slivers with conventionally produced rotor-spun yarns from card and draw-frame slivers has been checked in terms of their properties.

Słowa kluczowe

EN

quickspin; MDTA 3; Optimas; sliver; rotor spun yarn

PL

MDTA 3; Optimas; taśma; przędza rotorowa

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2004
• Tom: Vol. 4, no. 3
• Strony: 123--128
• Opis fizyczny: Bibliogr. 4 poz.

Twórcy

autor

Das D.

• Department of Textile Structures, Faculty of Textiles, Technical University of Liberec, Halkova 6, 46117, Liberec 1, Czech Republic

autor

Ishtiaque S. M.

• Department of Textile Technology, Indian Institute of Technology, Delhi, India

autor

Mac T.

• Institute for Textile Technology Aachen, RWTH Aachen University of Technology, Germany

autor

Veit D.

• Institute for Textile Technology Aachen, RWTH Aachen University of Technology, Germany

autor

Gries T.

• Institute for Textile Technology Aachen, RWTH Aachen University of Technology, Germany

Bibliografia

• 1. Artzt, P., Quickspin Method - A Praxis Proved Method For Qualification of Raw Material, Beltwide Cotton Conferences (Proceedings), (1998), 713-719.
• 2. Yankey, J.M., Quickspin/MDTA 3, Beltwide Cotton Conferences (Proceedings), (1994), 1628-1630.
• 3. Optimas (version 6.2) software, Stemmer Imaging GmbH, Puchheim (1997).
• 4. Mac, T., Gries. T., Wulfhorst, B., Methode zur Bestimmung der Qualitätsmerkmale von Fasermischungen und Garnen auf Basis der Eigenschaften der Einzelkomponenten, Final Report AiF 12051 N at the Institute for Textile Technology Aachen, RWTH Aachen University of Technology, Germany, 2001.