Thermovisual measurements of 3D printing of ABS and PLA filaments

• Autorzy: Zgryza Łukasz , Raczyńska Anna , Paśnikowska-Łukaszuk Magdalena

Identyfikatory

DOI

10.12913/22998624/94325

• Języki publikacji: EN

Abstrakty

EN

This paper presents the use of 3D printing and discusses two types of materials used in 3D printing, i.e. ABS (Acrylonitrile Butadiene Styrene) and PLA (Polylactide). Next, it presents the thermovisual measurementscarried out on 3D printed samples (FDM method - fused deposition modelling) of these materials. The temperature zones that occurred during printing were determined. The geometrical dimensions of samples from the same material that were printed under different conditions were compared. The height of the printed object has a large influence on temperature distribution on its surface and the printing time does not differ significantly when printing with PLA or ABS.

Słowa kluczowe

EN

thermovisual measurement; 3D printers; ABS; PLA; FDM

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 3
• Strony: 266--271
• Opis fizyczny: Bibliogr. 6 poz., fig., tab.

Twórcy

autor

Zgryza Łukasz

• Fundamentals of Technology Faculty, Lublin University of Technology, Nadbystrzycka 38 Str., 20-618 Lublin, Poland

autor

Raczyńska Anna

• Fundamentals of Technology Faculty, Lublin University of Technology, Nadbystrzycka 38 Str., 20-618 Lublin, Poland

autor

Paśnikowska-Łukaszuk Magdalena

• Fundamentals of Technology Faculty, Lublin University of Technology, Nadbystrzycka 38 Str., 20-618 Lublin, Poland

Bibliografia

• 1. Kosmol, J., Kopytyński, K., Lehrich, K., Dyrbuś, G.: Research on the quality of production using the FDM rapid prototyping method. Prace Naukowe Katedry Budowy Maszyn. Politechnika Śląska,2008, 3, 165-176.
• 2. Printo H3 - Printo3D.pl access: http://support. printo3d.pl/downloads/h3/PrintoH3_instrukcja_ obslugi.pdf 04.06.2018.
• 3. Szulżyk-Cieplak J., Duda A., Sidor B., 3D printers – new possibilities in education.Adv. Sci. Technol. Res. J., 2014, 8(24), 96-101.
• 4. Siemiński P., Budzik G.: Incremental techniques: 3D printer and printing. Warszawa 2015.
• 5. Dulski R., Madura H., Piatkowski T., Sosnowski T.:Analysis of a thermal scene using computer simulations.Infrared Physics & Technology, 49(3), 257-260.
• 6. Więcek B., De Mey G.:Infrared thermovision: basic and applications. Warszawa 2011.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).