Fatigue strength improvement of the AISI 316Ti austenitic stainless steel by shot peening

• Autorzy: Novy F. , Dundekova S. , Bokuvka O. , Trsko L.
• Języki publikacji: EN

Abstrakty

EN

Stainless steels are structural materials used for a wide range of applications. One of the fields of application of these highly corrosion resistant materials is for various medical applications. Different methods of mechanical property improvement have been studied in recent years to increase the durability of components manufactured from these materials. The main goal of this study was an analysis of fatigue strength improvement of the AISI 316Ti austenitic stainless steel by shot peening. A significant improvement of surface hardness, yield strength and fatigue limit by shot peening was observed in this study. This is despite increasing the surface roughness which usually degrades material’s fatigue strength.

Słowa kluczowe

EN

stainless steel; AISI 316L; shot peening; fatigue strength

PL

stal nierdzewna; AISI 316L; śrutowanie; wytrzymałość na zmęczenie

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2014
• Tom: Vol. 4, No. 3
• Strony: 2--6
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Novy F.

• Department of Materials Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak republic

autor

Dundekova S.

• Department of Materials Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak republic

autor

Bokuvka O.

• Department of Materials Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak republic

autor

Trsko L.

• Department of Materials Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak republic

Bibliografia

• 1. Abadie F. et al. 2006: Shot Peening: A Dynamic Application and its Future, 2nd Edition. MFN, Zurich.
• 2. Champagne J. 2001: Shot Peening Overview. In The Shot Peener. [online]. Available on the internet: http://www.shotpeener.com/library/spc/2001012.htm
• 3. Fajnor P., Liptáková T., Zatkalíková V., Brezinová J. 2011: Pitting corrosion of AISI 316Ti stainless steel with various treated surface, Perner’s Contacts, Special Issue 2, Volume VI.
• 4. Guagliano M. 2010: Mechanical Surface Treatment for Improving the Fatigue Behavior of Metal Alloys, In: Letná škola únavy 2010 (Summer School of Fatigue 2010), EDIS, Žilina.
• 5. Hadzima, B.; Liptáková, T. 2008: Basics of Electrochemical corrosion of metals, EDIS, Žilina. (in Slovak).
• 6. Liptáková, T. 2009: Pitting corrosion of stainless steels. EDIS, Žilina. (in Slovak).
• 7. Luong H., Hill M.R. 2010: The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloy, Mater. Sci. & Engng., Vol. 527. No. 3.
• 8. Miková K., Guagliano M., Bokůvka O., Trško L., Nový F. 2012: The role of shot peening in increasing X70 steel fatigue properties, Communications – Scientific Letters of the University of Zilina, Vol. 14, No. 4.
• 9. Müller E. 2010: Metal Finishing News 11. Available on the internet: http://www.mfn.li/article/?id=932
• 10. Murty Y. V. 2004: Use of Stainless Steels in Medical Applications, Medical Device Materials: Proceeding of the Materials and Processes for Medical Devices Conference, ASM International, California.
• 11. Pariente I.F., Guagliano M. 2009, Contact fatigue damage analysis of shot peened gears by means of X-ray measurements, Engineering Failure Analysis, Vol. 16, No. 33.
• 12. Szklarska–Smialowska, Z. 2005: Pitting and crevice corrosion, NACE International, Houston, Texas.
• 13. Tosha K. 2002: Influence of Residual Stresses on the Hardness Number in the Affected Layer Produced by Shot Peening, In: 2nd Asia-Pacific Forum on Precision Surface Finishing and Deburring Technik, Seoul 2002, pp. 48-54.
• 14. Wollmann M., Mhaede M., Wagner L. 2011: Effect of Austenite Stability on Phase Transformation and Fatigue Performance of Stainless Steels after Various Mechanical Surface Treatments, http://www.shotpeener.com/library/pdf/2011047.pdf
• 15. Yu-Kui G. 2004: Microstructure changes and residual stresses of each phase caused by shot peening in 304 austenitic stainless steel, Chineese Journal of Nonferrous Metals, Vol. 1, No. 1.
• 16. Zatkalíková V., Bukovina M., Škorík V., Petreková L. 2010: Pitting corrosion of AISI 316Ti stainless steel with polished surface, Materials Engineering – Materiálové Inžiniesrtvo, Vol. 17, No. 2.
• 17. Zhang P., Lindemann J., Leyens L. 2010: Shot peening on the high-strength magnesium alloy AZ80 - effect of peening media, J. of Mater. Proc. Technol., Vol. 210, No.3.