PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Multi-mode switching control of hybrid electromagnetic suspension based on road conditions adaptation

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this research, a hybrid electromagnetic actuator is proposed to coordinate the contradictions between dynamic performance and energy consumption of an electromagnetic suspension. The hybrid electromagnetic suspension (HEMS) is configured to operate in the passive energy regeneration mode, active control ride comfort mode or active control driving safety mode depending on the road excitation frequency. Then, the HEMS system is modeled. The simulation results show that the HEMS can automatically switch between different modes, and realize an effective coordination between dynamic performance and energy saving. Finally, a quarter car test is conducted, which verifies the effectiveness of the multi-mode switching control.
Rocznik
Strony
697--710
Opis fizyczny
Bibliogr. 19 poz., rys., tab.
Twórcy
  • School of Automotive and Traffic Engineering, Jiangsu University, China
autor
  • School of Automotive and Traffic Engineering, Jiangsu University, China
autor
  • School of Automotive and Traffic Engineering, Jiangsu University, China
autor
  • School of Automotive and Traffic Engineering, Jiangsu University, China
autor
  • School of Automotive and Traffic Engineering, Jiangsu University, China
Bibliografia
  • 1. Asadi E., Ribeiro R., Khamesee M.B., Khajepour A., 2017, Analysis, prototyping, and experimental characterization of an adaptive hybrid electromagnetic damper for automotive suspension systems, IEEE Transactions on Vehicular Technology, 66, 5, 3703-3713.
  • 2. Ataei M., Asadi E., Goodarzi A., Khajepour A., Khamesee M.B., 2017, Multi-objective optimization of a hybrid electromagnetic suspension system for ride comfort, road holding and regenerated power, Journal of Vibration and Control, 23, 5, 782-793.
  • 3. Bose suspension system, 2004, Bose Corporation.
  • 4. Ding R., Wang R., Meng X., 2018, Energy-saving control strategy design and structure realization for electromagnetic active suspension, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233, 9, 3060-3075.
  • 5. Ding R., Wang R., Meng X., Chen L., 2017, Study on coordinated control of the energy regeneration and the vibration isolation in a hybrid electromagnetic suspension, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231, 11, 1530-1539.
  • 6. Ding R., Wang R., Meng X., Chen L., 2019, A modified energy-saving skyhook for active suspension based on a hybrid electromagnetic actuator, Journal of Vibration and Control, 25, 2, 286-297.
  • 7. Li Z., Zuo L., Luhrs G., Lin L., Qin Y.-X., 2013, Electromagnetic energy-harvesting shock absorbers: design, modeling, and road tests, IEEE Transactions on Vehicular Technology, 62, 3, 1065-1074.
  • 8. Lv C., Zhang J., Li Y., Yuan Y., 2015, Mechanism analysis and evaluation methodology of regenerative braking contribution to energy efficiency improvement of electrified vehicles, Energy Conversion and Management, 92, 469-482.
  • 9. Martins I., Esteves M., Da Silva F.P., Verdelho P., 1999, Electromagnetic hybrid activepassive vehicle suspension system, 1999 IEEE 49th Vehicular Technology Conference, 3, 2273-2277.
  • 10. Martins I., Esteves J., Marques G.D., Pina da Silve F., 2006, Permanent-magnets linear actuators applicability in automobile active suspensions, IEEE Transactions on Vehicular Technology, 55, 1, 86-94.
  • 11. Shi D., Chen L., Wang R., Jiang H., Shen Y., 2014, Design and experiment study of a semi-active energy-regenerative suspension system, Smart Materials and Structures, 24, 1, 015001.
  • 12. Suda Y., Shiiba T., Hio K., Kawamoto Y., Kondo T., Yamagata H., 2004, Study on electromagnetic damper for automobiles with nonlinear damping force characteristics (road test and theoretical analysis), Vehicle System Dynamics, 41, 637-646.
  • 13. Sun X., Cai Y., Yuan C., Chen L., Wang R., 2017a, Hybrid model predictive control of damping multi-mode switching damper for vehicle suspensions, Journal of Vibroengineering, 19, 4, 2910-2930.
  • 14. Sun X., Yuan C., Cai Y., Wang S., Chen L., 2017b, Model predictive control of an air suspension system with damping multi-mode switching damper based on hybrid model, Mechanical Systems and Signal Processing, 94, C, 94-110.
  • 15. Xie X.D., Wang Q., 2015, Energy harvesting from a vehicle suspension system, Energy, 86, 385-392.
  • 16. Wang J., Jewell G.W., Howe D., 2001, Design optimization and comparison of tubular permanent magnet machine topologies, IEE Proceedings-Electric Power Applications, 148, 5, 456-464.
  • 17. Wang J., Wang W., Atallah K., 2011, A linear permanent-magnet motor for active vehicle suspension, IEEE Transactions on Vehicular Technology, 60, 1, 55-63.
  • 18. Wang R., Ding R., Chen L., 2018, Application of hybrid electromagnetic suspension in vibration energy regeneration and active control, Journal of Vibration and Control, 24, 1, 223-233.
  • 19. Zuo L., Chen X., Nayfeh S., 2011, Design and analysis of a new type of electromagnetic damper with increased energy density, Journal of Vibration and Acoustics, 133, 4, 041006.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-b24c1b17-fc98-4be3-abc3-2a01f4b9d0b9
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.