Vibration absorber optimization for boom-sprayer

• Autorzy: Kernytskyy I. , Diveyev B. , Stukalets I. , Horbay O. , Berezovetskyi S. , Baranovych E.

Identyfikatory

DOI

10.22630/PNIKS.2018.27.4.47

• Języki publikacji: EN

Abstrakty

EN

The main task of this work is to analyze optimal design-system of the booms of boom-sprayers. The discrete-continue models of machines dynamics of such wheeled machines as boom-sprayer with elongated boom element with the attachment of dynamic vibration absorbers are offered. The algorithms for vibration decreasing of boom are received. The new vibroabsorbing elements are proposed. The paper contemplates the provision of dynamic vibration absorbers (DVA) of buffered impact masses and particle type. Such originally designed absorbers reduce vibration selectively in maximum vibration mode, without introducing vibration in other modes. The damping results from the exchange of momentum during impacts among the masses and masses and stops as the structure vibrates. A technique is developed to give the optimal DVA’s as single degree of freedom (SDOF) buffered system. The one-digit values are established not only for the dynamic vibration absorber parameters, but also for mechanical parameter of base structure – boom in connection points of the dynamic vibration absorbers. Finally, present research develops the genetic algorithms for optimal design searching by discrete-continuum DVA’s system – base system modeling.

Słowa kluczowe

EN

boom sprayer; vibroprotection; design; vibration absorber; suspension; optimization

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Przegląd Naukowy Inżynieria i Kształtowanie Środowiska
• Rocznik: 2018
• Tom: Vol. 28, No. 4
• Strony: 504--515
• Opis fizyczny: Bibliogr. 26 poz., rys., wykr., zdj.

Twórcy

autor

Kernytskyy I.

• Szkoła Główna Gospodarstwa Wiejskiego w Warszawie, Wydział Budownictwa i Inżynierii Środowiska, Katedra Inżynierii Budowlanej, ul. Nowoursynowska 159, 02-776 Warszawa, Poland

autor

Diveyev B.

• Institute of Mechanical Engineering and Transport, Lviv Polytechnic National University

autor

Stukalets I.

• Faculty of Mechanic and Energetic, Lviv National Agrarian University

autor

Horbay O.

• Institute of Mechanical Engineering and Transport, Lviv Polytechnic National University

autor

Berezovetskyi S.

• Faculty of Mechanic and Energetic, Lviv National Agrarian University

autor

Baranovych E.

• Faculty of Mechanic and Energetic, Lviv National Agrarian University

Bibliografia

• Aida, T., Aso, T., Nakamoto, K. & Kawazoe, K. (1998). Vibration control of shallow shell structures using shell-type dynamic vibration absorber. Journal of Sound and Vibration, 218, 245-267.
• Bishop, R.E.D. & Welbourn, D.B. (1952). The problem of the dynamic vibration absorber. Engineering, 174, 796.
• De Jong, A., Van de Zande, J.C. & Stallinga, H. (2000). The effects of vertical and horizontal boom movements on the uniformity of spray distribution. Agricultural Engineering Conference Paper, 00-PM-015, 1-9.
• Diveyev, B., Beshley, A., Konyk, S. & Kernytskyy, I. (2015a). Identification of Transverse Elastic Module of Composite Beams by Using Combined Criteria. In M.J. Crocker, F. Pedrielli, S. Luzzi, M. Pawelczyk & E. Carletti (eds.), 22nd International Congress on Sound and Vibration 2015 (ICSV 22) Volume 2/8 (pages 3998-4005). Florence: International Institute of Acoustics & Vibration. Retrieved from: http://toc.proceedings.com/27211webtoc.pdf.
• Diveyev, B., Horbay, O., Kernytskyy, I., Pelekh, R. & Velhan, I. (2017). Dynamic Properties and Damping Predictions for Laminated MicroBeams by Different Boundary Conditions. In 2017 XIIIth International Conference on Perspective Technologies and Methods in MEMS Design (MEMSTECH 2017) (pages 30-34). Piscataway, NJ: Institute of Electrical and Electronics Engineers. Retrieved from: http://toc.proceedings.com/34656webtoc.pdf.
• Diveyev, B., Kernytskyy, I., Kopytko, M., Konyk S. & Kogut, V. (2015b). Sound transmission of sandwich beams with the dynamic vibration absorbers. Scientific Review Engineering and Environmental Sciences, 68, 120-132.
• Diveyev, B., Vikovych, I., Dorosh, I., & Kernytskyy, I. (2012). Different type vibration absorbers design for beam-like structures. In 19th International Congress on Sound and Vibration 2012 (ICSV 19). Volume 1/4. (pages 1499-1506). Auburn, AL: International Institute of Acoustics & Vibration. Retrieved from: http://toc.proceedings.com/16317webtoc.pdf.
• Herbst, A. & Wolf, P. (2000). Spray deposit distribution from agricultural boom sprayers in dynamic conditions. In P. Sas & B. Bergen (eds.), International Conference on Noise and Vibration Engineering 2010 (ISMA 2010). Volume 1/7. (pages 1599-1605). Leuven, Belgium: Katholieke Universiteit Leuven Department of Mechanical Engineering. Retrieved from: http://toc.proceedings.com/10610webtoc.pdf.
• Hunt, J.B. (1979). Dynamic Vibration Absorbers. London: Mechanical Engineering Publications.
• Inman, D.J. (1996). Engineering Vibration. Upper Saddle River, NJ: Prentice Hall International.
• Jacquot, R.G. (1978). Optimal dynamic vibration absorbers for general beam systems. Journal of Sound and Vibration, 60(4), 535-542.
• Kernytskyy, I., Diveyev, B., Vybranets, J.J. & Kernytskyy, N. (2008). Using of dynamic vibration absorbers for regulation of vibrating compactor vibration properties. Acta Scientiarum Polonorum Architectura (Budownictwo), 7(3), 43-50.
• Kernytskyy, I., Diveyev, B., Horbaj, O., Hlobchak, M., Kopytko, M. & Zachek, O. (2017). Optimization of the Impact Multi-Mass Vibration Absorbers. Scientific Review. Engineering and Environmental Sciences, 77, 394-400.
• Korenev, B.G. & Reznikov, L.M. (1993). Dynamic Vibration Absorbers: Theory and Technical Applications. Chichester, Wiley.
• Nagaya, K., Kurusu, A., Ikai, S. & Shitani, Y. (1999). Vibration control of a structure by using a tunable absorber and an optimal vibration absorber under auto-tuning control. Journal of Sound and Vibration, 228(4), 773-792.
• Marhadi, K.S. & Kinra, V.K. (2005). Particle impact damping: effect of mass ratio, material, and shape. Journal of Sound and Vibration, 283(1-2), 433-448.
• Ooms, D., Lebeau, F., Ruter, R. & Destain, M.F. (2002). Measurements of the horizontal sprayer boom movements by sensor data fusion. Computers and Electronics in Agriculture, 33, 139-162.
• Saeki, M. (2005). Analytical study of multi-particle damping. Journal of Sound and Vibration, 281, 1133-1144.
• Saffury, J. & Altus, E. (2010). Chatter resistance of non-uniform turning bars with attached dynamic absorbers-Analytical approach. Journal of Sound and Vibration, 329, 2029-2043.
• Sava, R., Kernytskyy, I. & Divejev, B. (2013). Optimization Of Dynamic Vibration Multi-Absorber. In K. Lejda (eds.), Systemy i środki transportu samochodowego. Wybrane zagadnienia. Monografia 4. Seria: Transport. (pages 173-180). Rzeszów: Politechnika Rzeszowska.
• Shah, B.M., Pillet, D., Bai, X.M., Keer, L.M., Wang, Q.J. & Snurr, R.Q. (2009). Construction and characterization of a particle-based thrust damping system. Journal of Sound and Vibration, 326(3-5), 489-502.
• Sinfort, C., Lardoux, Y., Miralles, A., Enf, P., Alness, K. & Andersson, S. (1997). Comparison between measurements and predictions of spray pattern from a moving boom sprayer. Aspects of Applied Biology, 48, 1-8
• Snowdon, J.C. (1968). Vibration and Shock in Damped Mechanical Systems. New York: Wiley.
• Timoshenko, S. (1955). Vibration Problems in Engineering. New York: Van Nostrand.
• Warburton, G.B. (1957). On the theory of the acceleration damper. Journal of Applied Mechanics, 24, 322-324.
• Wong, W.O., Tang, S.L., Cheung, Y.L. & Cheng, L. (2007). Design of a dynamic vibration absorber for vibration isolation of beams under point or distributed loading. Journal of Sound and Vibration, 301, 898-908.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).