A Study of Cutting and Forming Threads with Coated HSS Taps

• Autorzy: Piska M. , Sliwkova P.
• Języki publikacji: EN

Abstrakty

EN

Tapping is a very common machining process for producing internal threads. A tap is a cylindrical or tapered thread cutting tool having threads of a desired form on the periphery. Combining rotary motion with axial motion, a tap cuts or forms the internal thread. Due to desired accuracy and versatility of thread profiles most taps are made of high speed steel. Physical surface coating taps (monolayer, duplex or triplex) increases tap life and improves thread finish. Regarding the CNC canned cycles the demands on safe tool performance of the threads are more and more urgent. This paper deals with a study of 2D surface parameters, Coulomb´s coefficient of friction, energy consumption and cutting/forming performance of selected PVD coated HSS taps when machining of carbon steel C45 and forming of hardened steel 42CrMo4V.

Słowa kluczowe

EN

threads; cutting; forming; surface quality; tool life

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2015
• Tom: Vol. 15, No. 3
• Strony: 65--74
• Opis fizyczny: Bibliogr. 12 poz., tab., rys.

Twórcy

autor

Piska M.

• Brno University of Technology, Faculty of Mechanical Engineering, Brno, Czech Republic

autor

Sliwkova P.

• Brno University of Technology, Faculty of Mechanical Engineering, Brno, Czech Republic

Bibliografia

• [1] AGAPIOU J.S., 1994, Evaluation of the effect of high speed machining on tapping. In: ASME Transactions, Journal of Engineering for Industry, 116, 457–462.
• [2] BENGA G., CIUPITU I., 2008, The influence of coating and tool geometry on the tool life in a thread cutting process, Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, ISSN 172619679, ISBN 97813190150916811, Published by DAAAM International Vienna, pg. 91192.
• [3] BENGA G., CIUPITU I., STANIMIR A., 2009, Correlation between cutting forces and tool wear when thread tapping AISI P20 hardened steel, Annals of DAAAM for 2009 &Proceedings of the 20th International DAAAM Symposium, 20/1, ISSN 1726-9679, ISBN 978-3-901509-70-4, Published by DAAAM Int. Vienna, 1753–1754.
• [4] CHOWDHARY S., 2002, Modelling and Analysis of Internal Thread Forming, University of Illinois at Urbana-Champaign. Society of Manufacturing Engineers, Dearborn, Mich. Series: Technical paper // SME, Society of Manufacturing Engineers, MR 02-172, 204.
• [5] HAYAMA M., 1972, Estimation of torque in cold forming of internal thread, Bulletin of the Faculty of Engineering, Yokohama National University, 21, 77–90.
• [6] HENDERER W.E., von TURKOVICH B.F, 1974, Theory of the cold forming tap, Annals of the CIRP, 3, 51–52.
• [7] HENDERER W.E., von TURKOVICH B.F., 1975, Theory and experiments in tapping. North American Manufacturing Research Conference, 3, 589–602.
• [8] HUTH M.W., 2003, Basic Principles for Construction, Cengage Learning, ISBN 1-4018-3837-5, 288.
• [9] FROMENTIN G., POULACHON G., MOISAN A., 2002, Thread forming tapping of alloyed steel, ICME Proceedings, Naples, Italy, 115–118.
• [10] LANDETA J.F., VALDIVIELSO A.F., LÓPEZ DE LACALLE L.N., GIROT F., PÉREZ J.M.J., 2015, Wear of Form Taps in Threading of Steel Cold Forged Parts, Manuf. Sci. Eng., 137/3, 031002-031002-11.
• [11] PISKA M., POLZER A., 2012, On the advanced PVD coatings for threading in austenitic steel, Proceedings of the 23rd International DAAAM Symposium, Vienna,831-834, ISBN 978-3-901509-91-9, ISBN 978-3-901509-83-4.
• [12] ISO 3002-4 (Basic Quantities in Cutting and Grinding -Part 4: Forces, energy, power).