Fabrication and characterisation of porous coatings obtained by plasma electrolytic oxidation

Rokosz, K.; Hryniewicz, T.; Raaen, S.; Malorny, W.

Artykuł - szczegóły

Tytuł artykułu

Fabrication and characterisation of porous coatings obtained by plasma electrolytic oxidation

Autorzy

Rokosz K. , Hryniewicz T. , Raaen S. , Malorny W.

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

Warianty tytułu

Języki publikacji

Abstrakty

In the paper, characteristics of porous coatings enriched in copper on pure Titanium and its alloys (NiTi, Ti6Al4V, TNZ, Ti2448) as well as on niobium obtained by Plasma Electrolytic Oxidation (PEO) in electrolyte containing H3PO4 within Cu(NO3)2, are presented. All obtained surfaces of PEO coatings have different shapes and diameters of pores. The binding energies of main peaks for titanium Ti2p3/2, niobium Nb3d5/2, zirconium Zr3d5/2, phosphorus (P2p) and oxygen (O1s) suggest the presence of titanium Ti4+, niobium Nb5+ and zirconium Zrx+ (x≤2) as well as PO4 3–.

Słowa kluczowe

Plasma Electrolytic Oxidation PEO micro arc oxidation MAO CP Titanium Grade 2 niobium Ti2448 Ti6Al4V TNZ

plazmowe utlenianie elektrolityczne PEO utlenianie mikro-łukowe MAO tytan stopy tytanu niob Ti2448 Ti6Al4V TNZ

Wydawca

Wydawnictwo Uczelniane Politechniki Koszalińskiej

Czasopismo

Journal of Mechanical and Energy Engineering

Rocznik

2017

Tom

Vol. 1, No 1

Strony

23--30

Opis fizyczny

Bibliogr. 53 poz., rys., wykr.

Twórcy

autor

Rokosz K.

rokosz@tu.koszalin.pl

Division of BioEngineering and Surface Electrochemistry, Faculty of Mechanical Engineering Koszalin University of Technology, Racławicka 15-17, PL 75-620 Koszalin, Poland

autor

Hryniewicz T.

Division of BioEngineering and Surface Electrochemistry, Faculty of Mechanical Engineering Koszalin University of Technology, Racławicka 15-17, PL 75-620 Koszalin, Poland

autor

Raaen S.

Department of Physics, Norwegian University of Science and Technology (NTNU) Realfagbygget E3-124 Høgskoleringen 5, NO 7491 Trondheim, Norway

autor

Malorny W.

Hochschule Wismar-University of Applied Sciences Technology, Business and Design, Faculty of Engineering, DE 23966 Wismar, Germany

Bibliografia

1. Hryniewicz T., Hryniewicz Z. (1989). On the solution of equation of diffusion in electropolishing. Journal of the Electrochemical Society. Vol. 136, No. 12, pp. 3767-3769.
2. Hryniewicz T. (1994). Concept of microsmoothing in the electropolishing process. Surface and Coatings Technology. Vol. 64, No. 2, pp. 75-80.
3. Rokicki R., Hryniewicz T. (2012). Enhanced oxidation-dissolution theory of electropolishing. Transactions of The Institute of Metal Finishing. Vol. 90, No. 4, pp. 188-196.
4. Hryniewicz T., Rokosz K., Zschommler Sandim HR. (2012). SEM/EDX and XPS studies of niobium after electropolishing. Applied Surface Science. Vol. 263, pp. 357-361.
5. Hryniewicz T., Konarski P., Rokicki R., and Valiček J. (2011) SIMS analysis of hydrogen content in near surface layers of AISI 316L SS after electrolytic polishing under different conditions. Surface and Coatings Technology. Vol. 205, pp. 4228-4236.
6. Rokosz K. (2012). Electrochemical polishing in magnetic field. Koszalin University of Technology Publishing House (in Polish)
7. Rokicki R., Hryniewicz T., Rokosz K. (2008). Modifying Metallic Implants by Magnetoelectropolishing. Medical Device & Diagnostic Industry. Vol. 30, No. 1, pp. 102-111.
8. Rokicki R., Hryniewicz T. (2008). Nitinol surface finishing by magnetoelectropolishing. Transactions of The Institute of Metal Finishing. Vol. 86, pp. 280-285.
9. Rokicki R., Haider W., Hryniewicz T. (2012). Influence of Sodium Hypochlorite Treatment of Electropolished and Magnetoelectropolished Nitinol Surfaces on Adhesion and Proliferation of MC3T3 Pre-osteoblast Cells. Journal of Materials Science: Materials in Medicine. Vol. 23, pp. 2127-2139.
10. Hryniewicz T., Rokicki R., Rokosz K. (2008). Co-Cr alloy corrosion behaviour after electropolishing and "magnetoelectropolishing" treatments. Surface and Coatings Technology. Vol. 62, No. 17-18, pp. 3073-3076.
11. Hryniewicz T., Rokosz K. (2010). Analysis of XPS results of AISI 316L SS electropolished and magnetoelectropolished at varying conditions. Surface and Coatings Technology. Vol. 204, No. 16-17, pp. 2583-2592.
12. Rokosz K., Hryniewicz T., Raaen S. (2014). Cr/Fe ratio by XPS spectra of magnetoelectropolished AISI 316L SS fitted by Gaussian-Lorentzian shape lines. Tehnicki Vjesnik-Technical Gazette. Vol. 21, No. 3, pp. 533-538.
13. Hryniewicz T., Rokicki R., Rokosz K. (2007). Magnetoelectropolishing for metal surface modification. Transactions of The Institute of Metal Finishing. Vol. 85, No. 6, pp. 325-332.
14. Hryniewicz T., Rokicki R., Rokosz K. (2008). Corrosion and surface characterization of titanium biomaterial after magnetoelectropolishing. Surface and Coatings Technology. Vol. 203, No. 9, pp. 1508-1515.
15. Hryniewicz T., Rokosz K. (2010). Polarization characteristics of magnetoelectropolishing stainless steels. Materials Chemistry and Physics. Vol. 122, No. 1, pp. 169–174.
16. Hryniewicz T., Rokicki R., Rokosz K. (2011). Chapter 11. Magnetoelectropolished Titanium Biomaterial, in Biomaterial/Book 2, InTech, pp. 227-248.
17. Hryniewicz T., Konarski P., Rokicki R., Valiček J. (2012). SIMS studies of titanium biomaterial hydrogenation after magnetoelectropolishing. Surface and Coatings Technology. Vol. 206, pp. 4027-4031.
18. Rokosz K. Hryniewicz T. (2011). Effect of magnetic field on the pitting corrosion of austenitic steel type AISI 304. Ochrona przed Korozją. Vol. 54, No. 7, pp. 487-491.
19. Rokosz K., Hryniewicz T., Raaen S. (2012). Characterization of passive film formed on AISI 316 L stainless steel after magnetoelectropolishing in a broad range of polarization parameters. Steel Research International. Vol. 83, No. 9, pp. 910–918.
20. Hryniewicz T., Rokosz K. (2010). Investigation of selected surface properties of AISI 316L SS after magnetoelectropolishing. Materials Chemistry and Physics. Vol. 123, No. 1, pp. 47–55.
21. Hryniewicz T., Rokosz K., Rokicki R. (2014). Magnetic Fields for Electropolishing Improvement: Materials and Systems. International Letters of Chemistry, Physics and Astronomy. Vol. 4, pp. 98-108.
22. Hryniewicz T., Rokosz K. (2014). Corrosion resistance of magnetoelectropolished AISI 316L SS biomaterial. Anti-Corrosion Methods and Materials. Vol. 61, No. 2, pp. 57-64.
23. Hryniewicz T., Rokosz K., Valiček J., Rokicki R. (2012). Effect of magnetoelectropolishing on nanohardness and Young’s modulus of titanium biomaterial. Materials Letters. Vol. 83, pp. 69-72.
24. Hryniewicz T., Rokosz K., Rokicki R., Prima F. (2015). Nanoindentation and XPS Studies of Titanium TNZ Alloy after Electrochemical Polishing in a Magnetic Field. Materials. Vol. 8, pp. 205-215.
25. Rokosz K., Hryniewicz T. (2013). XPS measurements of LDX 2101 duplex steel surface after magnetoelectropolishing. International Journal of Materials Research. Vol. 104, No. 12, pp. 1223-1232.
26. Rokosz K., Hryniewicz T. (2016). XPS Analysis of nanolayers obtained on AISI 316L SS after Magnetoelectropolishing. World Scientific News. Vol. 37, pp. 232-248.
27. Rokicki R., Hryniewicz T., Konarski P., Rokosz K. (2017). The alternative, novel technology for improvement of surface finish of SRF niobium cavities. World Scientific News. Vol. 74, pp. 152-163.
28. Rokosz K., Hryniewicz T., Simon F., Rzadkiewicz S. (2015). Comparative XPS analysis of passive layers composition formed on AISI 304 L SS after standard and high-current density electropolishing. Surface and Interface Analysis. Vol. 47, No. 1, pp. 87-92.
29. Rokosz K., Lahtinen J., Hryniewicz T., Rzadkiewicz S. (2015). XPS depth profiling analysis of passive surface layers formed on austenitic AISI 304L and AISI 316L SS after high-current-density electropolishing. Surface and Coatings Technology. Vol. 276, pp. 516-520.
30. Rokosz K., Hryniewicz T., Simon F., Rzadkiewicz S. (2016). Comparative XPS analyses of passive layers composition formed on duplex 2205 SS after standard and high-current-density electropolishing. Tehnički vjesnik - Technical Gazette.Vol. 23, No. 3, pp. 731-735.
31. Gnedenkov S.V., Sharkeev Y.P., Sinebryukhov S.L., Khrisanfova O.A., Legostaeva E.V., Zavidnaya A.G., Puz’ A.V., Khlusov I.A., Opra D.P. (2016). Functional coatings formed on the titanium and magnesium alloys as implant materials by plasma electrolytic oxidation technology: fundamental principles and synthesis conditions. Corrosion Review. Vol. 34, No. 1-2, pp. 65-83.
32. Simka W., Sadowski A., Warczak M., Iwaniak A., Dercz G., Michalska J., Maciej A. (2011). Modification of titanium oxide layer by calcium and phosphorus. Electrochimica Acta. Vol. 56, No. 24, pp. 8962-8968.
33. Han Y., Hong S.H., Xu K.W. (2002). Synthesis of nanocrystalline titania films by micro-arc oxidation. Materials Letters. Vol. 56, pp. 744-747.
34. Han Y., Hong S.H., Xu K.W. (2003). Structure and in vitro bioactivity of titania-based films by micro-arc oxidation. Surface and Coatings Technology. Vol. 168, pp. 249-258.
35. Fei C., Hai Z., Chen C., Yangjian X. (2009). Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation. Progress in Organic Coatings. Vol. 64, pp. 264-267.
36. Aliasghari S. (2014). Plasma Electrolytic Oxidation of Titanium. PhD Thesis of Faculty of Engineering and Physical Sciences. The University of Manchester, School of Materials, 223 pages.
37. Teh T.H., Berkani A., Mato S., Skeldon P., Thompson G.E., Habazaki H., Shimizu K. (2003). Initial stages of plasma electrolytic oxidation of titanium. Corrosion Science. Vol. 45, pp. 2757-2768.
38. Krzakala A., Mlynski J., Dercz G., Michalska J., Maciej A., Nieuzyla L., Simka W. (2014). Modification of Ti-6Al-4V alloy surface by EPD-PEO process in ZrSiO4 suspension. Archives of Metallurgy and Materials. Vol. 59, No. 1, pp. 199-204.
39. Simka W., Nawrat G., Chlode J., Maciej A., Winiarski A., Szade J., Radwanski K., Gazdowicz J. (2011). Electropolishing and anodic passivation of Ti6Al7Nb alloy. Przemysł Chemiczny. Vol. 90, No. 1, pp. 84-90.
40. Wang Y., Jiang B., Lei T., Guo L. (2004). Dependence of growth features of microarc oxidation coatings of titanium alloy on control modes of alternate pulse. Materials Letters. Vol. 58, pp. 1907-1911.
41. Rokosz K., Hryniewicz T., Raaen S. (2016). Development of Plasma Electrolytic Oxidation for improved Ti6Al4V biomaterial surface properties. The International Journal of Advanced Manufacturing Technology. Vol. 85, pp. 2425-2437.
42. Rokosz K., Hryniewicz T., Raaen S., Chapon P. (2016). Investigation of porous coatings obtained on Ti-Nb-Zr-Sn alloy biomaterial by Plasma Electrolytic Oxidation: Characterisation and Modelling. The International Journal of Advanced Manufacturing Technology. Vol. 87, No. 9, pp. 3497–3512.
43. Rokosz K., Hryniewicz T., Raaen S., Chapon P. (2017). Development of copper-enriched porous coatings on ternary Ti-Nb-Zr alloy by Plasma Electrolytic Oxidation, The International Journal of Advanced Manufacturing Technology. Vol. 89, No. 9, pp. 2953–2965.
44. Rokosz K., Hryniewicz T. (2015). Characteristics of porous and biocompatible coatings obtained on Niobium and Titanium-Niobium-Zirconium (TNZ) alloy by Plasma Electrolytic Oxidation. Mechanik. Vol. 12, pp. 15-18.
45. Rokosz K., Hryniewicz T., Dudek Ł., Matysek D., Valicek J., Harnicarova M. (2016). SEM and EDS Analysis of Surface Layer Formed on Titanium After Plasma Electrolytic Oxidation in H3PO4 with the Addition of Cu(NO3)2. Journal of Nanoscience and Nanotechnology. Vol. 16. No. 8, pp. 7814-7817.
46. Rokosz K,, Hryniewicz T,, Dalibor M,, Raaen S,, Valiček J,, Dudek Ł,, Harničarova M. (2016). SEM, EDS and XPS Analysis of the Coatings Obtained on Titanium after Plasma Electrolytic Oxidation in Electrolytes Containing Copper Nitrate. Materials. Vol. 9, No. 5, pp. 1-12.
47. Rokosz K., Hryniewicz T., Raaen S., Chapon P., Dudek Ł. (2016). GDOES, XPS and SEM with EDS analysis of porous coatings obtained on Titanium after Plasma Electrolytic Oxidation. Surface and Interface Analysis. Vol. 49, No. 4, pp. 303-315.
48. Rokosz K., Hryniewicz T., Chapon P., Dudek Ł. (2016). A new approach to porous PEO coating sub-layers determination on the basis of GDOES signals. World Scientific News. Vol. 57, pp. 289-299.
49. Rokosz K., Hryniewicz T., Chapon P., Raaen S., Zschommler Sandim H.R. (2016). XPS and GDOES characterisation of porous coating enriched with copper and calcium obtained on Tantalum via Plasma Electrolytic Oxidation. Journal of Spectroscopy. Article ID 7093071 (7 pages). http://dx.doi.org/10.1155/2016/7093071
50. Rokosz K., Hryniewicz T., Malorny W. (2016). Characterisation of porous coatings obtained on materials by Plasma Electrolytc Oxidation. Materials Science Forum. Vol. 862, pp. 86-95.
51. Rokosz K., Hryniewicz T., Raaen S. (2017). SEM, EDS and XPS analysis of nanostructured coating obtained on NiTi biomaterial alloy by Plasma Electrolytic Oxidation (PEO). Tehnički vjesnik-Technical Gazette, Vol.24, No. 1, pp. 193-198.
52. Rokosz K., Hryniewicz T., Raaen S., Chapon P. (2017). Development of copper-enriched porous coatings on ternary Ti-Nb-Zr alloy by Plasma Electrolytic Oxidation. The International Journal of Advanced Manufacturing Technology. Vol. 89, No. 9-12, pp. 2953–2965. DOI 10.1007/s00170-016-9206-z
53. Rokosz K., Hryniewicz T. (2017). Comparative SEM and EDX analysis of surface coatings created on niobium and titanium alloys after Plasma Electrolytic Oxidation (PEO). Tehnički vjesnik-Technical Gazette. Vol. 24, No. 2, pp. 465-472.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-b18b7727-26ce-48c1-bb9a-f05c627e9a48