Influence of REDM parameters on surface shape

• Autorzy: Gulbinowicz Zbigniew , Goroch Olgierd
• Języki publikacji: EN

Abstrakty

EN

The paper presents the impact of selected machining parameters on surface’s shape after machining in REDM (Rotary Electrical Discharge Machining). A mathematical model describing the influence of REDM parameters on the final shape and the relative tool-electrode wear is presented. Influence of REDM parameters on the relative tool-electrode wear and the final shape was determined in experimental practice. Results of computer simulation have been confirmed in experimental practice.

Słowa kluczowe

EN

Rotary Electrical Discharge Machining; Abrasive Electrodischarge Grinding; Rotary Electrochemical Arc/Discharge Machining – RECAM/RCDM

PL

obrotowa obróbka elektroiskrowa; szlifowanie elektroiskrowe; obrotowa elektrochemiczna obróbka łukowo-wyładowcza RECAM/RCDM

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 2
• Strony: 89--96
• Opis fizyczny: Bibliogr. 8 poz., fig., tab.

Twórcy

autor

Gulbinowicz Zbigniew

• Warsaw University of Technology; Faculty of Production Engineering; Institute of Mechanics and Printing, Narbutta 85, 02-524 Warsaw, Poland

autor

Goroch Olgierd

• Warsaw University of Technology; Faculty of Production Engineering; Institute of Mechanics and Printing, Narbutta 85, 02-524 Warsaw, Poland

Bibliografia

• 1. Uno, Y., Okada, A., Itoh, M., Yamaguchi, T., 1996, EDM of Groove with Rotating Disk Electrode, Int. J. of Electrical Machining, 1:13-20.
• 2. Quian, J., Ohmori, H., Kato, T., Marinescu, I., 2000, Fabrication of Micro Shapes of Advanced Materials by ELID- Grinding, Transactions of NAMRI/SME, 27: 269-278.
• 3. Bleys, Ph., Kruth, J.P., 2001, Machining Complex Shapes by Numerically Controlled EDM, Int. J. of Electrical machining, 6: 61-69.
• 4. Kozak, J., 2001, Effect of the Wear of Rotating Tool on the Accuracy of Machined Parts, Proceedings of the 2nd International Conference on Advances in Production Engineering APE-2, Warsaw, Vol. I: 253-262.
• 5. Zbigniew Gulbinowicz, “Analiza procesu kształtowania REDM”, Mechanik, ISSN 0025- 6552, 04, 04/2015, 56-61.
• 6. Kozak J., Gulbinowicz Z., Kozlowska D.: Computer Simulation of Rotary Electrical Discharge Machining, The Archive of Machanical Engineering (Journal of Polish Academy of Science), Vol. XL, No. 1, 2004, 111-125.
• 7. Polański Z., Górecka-Polańska R.: DEX: ESDET2.2 - podręcznik użytkownika. CERMET Zakład Postępu Technicznego i Wdrożeń, Kraków 1992.
• 8. Piltz S., Roehner M., Uhlmann E.: Machining of Micro Rotational Parts Using Electrical Discharge Machining Proceedings of the 15th International Symposium on Electromachining (ISEM XV) 2007, 247-252.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).