The process capability study by the flange shaft production

• Autorzy: Lestyánszka-Škurková Katarína , Pauliková Alena

Identyfikatory

DOI

10.2478/cqpi-2021-0030

• Języki publikacji: EN

Abstrakty

EN

Ensuring the process0capability currently means the warranty, that produced products will be0in accordance with requirements – from company´s side or from customer´s side. This study focuses on the statistical control of flange shaft proces capability by serial production0in company focused on products for automotive. The flange shaft proces is evaluated by control charts,0specifically by control chart for average and range ([iks z kreską poziomą u góry], R). As the results showed, based on diagram for average and range we are able0to say that the turning process is under the statistical control. Also, we had finished the0reguest for capability of process, where0the indexes of capability process C_pk1 and C_pk2 are higher than the determined value on 1.33 point. The normality of the measured values was verified by histogram. Obtained values are: C_pk1 = 1.645 a C_pk = 1.52. Therefore, we can consider the process as capable.

Słowa kluczowe

EN

process; flange shaft; normality; stability; capability

PL

proces; wałek kołnierzowy; normalność; stabilność; zdolność

• Wydawca: De Gruyter
• Czasopismo: Quality Production Improvement - QPI
• Rocznik: 2021
• Tom: Vol. 3, Iss. 1
• Strony: 305--313
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Lestyánszka-Škurková Katarína

• Slovak University of Technology in Bratislava, Slovakia

• https://orcid.org/0000-0003-0088-5454

autor

Pauliková Alena

• Slovak University of Technology in Bratislava, Slovakia

• https://orcid.org/0000-0002-2959-5656

Bibliografia

• 1.Hrubec, J.: Riadenie kvality. Nitra: SPU v Nitre, 2001. s.203. ISBN 807137-849-6
• 2.Hrubec, J., Krchnák, P., Lestyánszka, K.: Inžinierstvo kvality produkcie. 1. Vyd., Vydavateľstvo SPU v Nitre, Nitra, 2014, 166 s. ISBN 978-80552-1174-9
• 3.Hrubec J., Virčíková, E: Integrovaný manažérsky systém. Nitra: SPU v Nitre, 2009. s.543. ISBN 978-80-552-0231-0
• 4.Kučerová, M., Lestyánszka, K.: Štatistické metódy kontroly kvality. 1. Vyd., Trnava: AlumniPress MTF STU, 2011, 150 s. ISBN 978-80-8096146-6
• 5.Gálisová, A.: Posúdenie spôsobilosti procesu výroby prírubového hriadeľa. Bakalárska práca. MTF STU so sídlom v Trnave, 2020.
• 6.Lestyánszka Škůrková K.: The stapling of material layers process capability study by the production of the product "multiaxial". Production Engineering Archives 6/1(2015), pp. 10-13
• 7.Jankajová, E., Kotus, M.: Reliability evaluation in the production process of aluminium castings. Production Engineering Archives 6/1(2015), pp. 49-51
• 8.Lestyánszka Škůrková K. 2013. Using the Shewhart control charts by process control. In: Production Engineering Archives. Publisher Printing House, The Managers of quality and production association, Poland. Vol. 1, ISSN 2353-5156, s. 29-31.
• 9.DIN ISO 3534-2:2013-12: Statistics-Vocabulary and Symbols – Part 2: Applied Statistics (ISO 3534-2:2006)
• 10. Dietrich, E., Schulze, A.: Statistical Procedures for Machine and Process Qualification. Munich Hanser Publications, Cincinnati (2010)
• 11.Härdle, W., Simar, L.: Applied Multivariate Statistical Analysis. Springer, Heidelberg (2015)
• 12.Kotz, S., Balakrishnan, N. Johnson, N.: Continuous Multivariate Distributions. Wiley, Hoboken (2005)
• 13.Bracke, S., Backes, B.: Multivariate process capability, process validation and risk analytics based on product characteristic sets: Case study piston rod. Advances in Intelligent Systems and Computing 637, pp. 324-335, 2018
• 14.Škůrková, K.L., Kudičová, J.: Study of injection process capability in production of plastic boxes. Acta Technologica Agriculturae 2, Nitra 2015, pp. 54-56.
• 15.Pacana, A., Czerwińska, K.: Improving the quality level in the automotive industry. Production engineering archives, 2020, 26 (4), 162-166.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).