The relationship between wind pressure on the surface of rectangular prisms and atmospheric boundary layer parameters

• Autorzy: Lipecki T.

Identyfikatory

DOI

10.4467/2353737XCT.15.127.4164

Warianty tytułu

PL

Zależność między ciśnieniem wiatru na powierzchni obiektów prostopadłościennych a parametrami warstwy przyściennej

• Języki publikacji: EN

Abstrakty

EN

This paper considers the dependence of pressure fields on surfaces of rectangular prisms obtained from wind tunnel experiments on boundary layer characteristics. Six different variants of boundary layer flows were simulated in the wind tunnel. The qualitative coefficients of correlation R_s between the wind pressure coefficient C_p or its standard deviation σ_p and parameters describing boundary layer flows (wind speed profile, turbulence intensity profile, power spectral density) were estimated in order to determine how wind parameters influence surface pressure. Five rectangular prisms were placed in the wind tunnel. The following ratios of prism dimensions were adopted: D/B/H = 1:2:20 (R5); 1:2:10 (R3); 1:2:5 (R1); 1:4:20 (R4); 1:4:10 (R2).

PL

W artykule przedstawiono analizę zależności ciśnienia zmierzonego na powierzchniach obiektów prostopadłościennych w trakcie badań wykonanych w tunelu aerodynamicznym od parametrów opisujących strukturę wiatru w warstwie przyściennej. W pomiarach przyjęto sześć różnych wariantów struktury wiatru. Wyznaczono jakościowy współczynnik korelacji R_s między współczynnikiem średniego ciśnienia C_p lub jego odchylenia standardowego σ_p na powierzchni modeli, a parametrami określającymi strukturę wiatru w warstwie przyściennej (pionowym profilem średniej prędkości wiatru, pionowym profilem intensywności turbulencji, funkcją gęstości widmowej mocy). Celem analiz było określenie wpływu poszczególnych parametrów wiatru na ciśnienie powierzchniowe. Pomiary wykonano na pięciu modelach prostopadłościanów o następujących stosunkach wymiarów: D/B/H = 1:2:20 (R5), 1:2:10 (R3), 1:2:5 (R1), 1:4:20 (R4), 1:4:10 (R2).

Słowa kluczowe

EN

wind action; wind tunnel; pressure coefficient; Spearman correlation coefficients

PL

oddziaływanie wiatru; tunel aerodynamiczny; współczynnik ciśnienia; współczynniki korelacji Spearmana

• Wydawca: Wydawnictwo Politechniki Krakowskiej im. Tadeusza Kościuszki
• Czasopismo: Czasopismo Techniczne. Budownictwo
• Rocznik: 2015
• Tom: Y. 112, iss. 2-B
• Strony: 91--105
• Opis fizyczny: Bibliogr. 33 poz., tab., wykr., il.

Twórcy

autor

Lipecki T.

• Department of Structural Mechanics, Lublin University of Technology, Poland

Bibliografia

• [1] Vickery B.J., Fluctuating lift and drag on a long cylinder of square cross-section in a smooth and in a turbulent stream, Journal of Fluid Mechanics, Vol. 25(3), 1966, 481-491.
• [2] Saathoff P., Melbourne W.H., Effects of free stream turbulence on streamwise pressure measured on a square-section cylinder, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 79, 1999, 61-78.
• [3] Lee B.E., The effect of turbulence on the surface pressure field of a square prism,Journal of Fluid Mechanics, Vol. 69(2), 1975, 263-282.
• [4] Miyata T., Miyazaki M., Turbulence effects on aerodynamic response of rectangular bluff cylinders, Cermak J.E. (Ed.), Wind Engineering, Proc. 5th International Conference on Wind Engineering, Fort Collins, Colorado, USA , July 1979, 631-642.
• [5] Noda H., Nakayama A., Free-stream turbulence effects on the instantaneous pressure and forces on cylinders of rectangular cross section, Experiments in Fluids, Vol. 34, 2003, 332-344.
• [6] Li Q.S., Melbourne W.H., Effects of turbulence on surface pressures of the flat plate and rectangular cylinders in separated and reattaching flows, Proc. 9th International Conference on Wind Engineering, New Delhi, India, 1995, 165-176.
• [7] Li Q.S., Melbourne W.H., The effects of large scale turbulence on pressure fluctuations in separated and reattaching flows, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 83, 1999, 159-169.
• [8] Kareem A., Cermak J.E., Pressure fluctuations on a square building model in boundarylayer flows, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 16, 1984, 17-41.
• [9] Sitheeq M.M., Iyengar A.K.S., Farell C., Effect of turbulence and its scales on the pressure field on the surface of a three-dimensional square prism, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 69-71, 1997, 461-47l.
• [10] Butler K., Cao S., Kareem A., Tamura Y., Ozono S., Surface pressure and wind load characteristics on prisms immersed in a simulated transient gust front flow field, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 98, 2010, 299-316.
• [11] Kareem A., Measurements of pressure and force fields on building models in simulated atmospheric flows, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 36, 1990, 589-599.
• [12] Cheng C.M., Tsai M.S., Along wind design wind load for tall buildings (I) Results of wind tunnel tests, Proc. 5th International Advanced School on wind Engineering, The GCOE Program at Tokyo Polytechnic University, Poland, Opole 2009.
• [13] Rosa L., Tomasini G., Zasso A., Aly A.M., Wind-induced dynamics and loads in a prismatic slender building: A modal approach based on unsteady pressure measurements, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 107-108, 2012, 118-130.
• [14] Counihan J., Simulation of an adiabatic urban boundary layer in the wind tunnel, Atmospheric Environment, Vol. 7, 1973, 673-689.
• [15] Robins A.G., The development and structure of simulated neutrally stable atmospheric boundary layers, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 4, 1979, 71-100.
• [16] Farell C., Iyengar A.K.S., Experiments on the wind tunnel simulation of atmospheric boundary layers, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 79, 1999, 11-35.
• [17] Witter A.R., Möller S.V., Characteristics of the low-speed wind tunnel of the UNNE, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 84, 2000, 307-320.
• [18] Iyengar A.K.S., Farell C., Experimental issues in atmospheric boundary layer simulations: roughness length and integral length scale determination, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 89, 2001, 1059-1080.
• [19] Balendra, T., Shah, D.A., Tey, K.L., Kong, S.K., Evaluation of flow characteristics in the NUS-HDB Wind Tunnel, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 90, 2002, 675-688.
• [20] De Bortoli M.E., Natalini B., Paluch M.J., Natalini M.B., Part-depth wind tunnel simulations of the atmospheric boundary layer, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 90, 2002, 281-291.
• [21] Chen K., Jin X.Y., Zhao J.D., Design and characteristics of a large boundary layer wind tunnel with two test sections, Proc. 7th Asia-Pacific Conference on Wind Engineering, Taipei, Taiwan, 2009, CD .
• [22] Kozmar H., Scale effects in wind tunnel modeling of an urban atmospheric boundary layer, Theoretical and Applied Climatology, Vol. 100(1-2), 2010, 153-162.
• [23] Kozmar H., An alternative approach to experimental simulation of wind characteristicsin urban environments, Procedia Environmental Sciences, Vol. 4, 2011, 43-50.
• [24] Kozmar H., Truncated vortex generators for part-depth wind-tunnel simulations of the atmospheric boundary layer flow, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 99, 2011, 130-136.
• [25] Kozmar H., Characteristics of natural wind simulations in the TUM boundary layer wind tunnel, Theoretical and Applied Climatology, Vol. 106, 2011, 95-104.
• [26] Kozmar H., Physical modeling of complex airflows developing above rural terrains, Environmental Fluid Mechanics, Vol. 12, 2012, 209-225.
• [27] Varshney K., Poddar K., Experiments on integral length scale control in atmospheric boundary layer wind tunnel, Theoretical and Applied Climatology, Vol. 106, 2011, 127-137.
• [28] Varshney K., Tailoring wind properties by various passive roughness elements in a boundary-layer wind tunnel, International Journal of Physical Sciences, Vol. 7(8), 2012, 1182-1186.
• [29] Flaga A. Lipecki T. (eds.), Environmental effects on buildings, structures, materials and people, Lublin 2007.
• [30] Lipecki T., Bęc J., Błazik-Borowa E., Surface pressures on rectangular cylinders – the dependence on aspect ratio, wind structure and angle of wind attack, Proc. 7th Symposium on Bluff Body Aerodynamics and Applications, China, Shanghai 2012.
• [31] Lipecki T., Jamińska P., Analysis of wind pressure distribution on the surface of 2:1 rectangular cylinder, Proc. XX Fluid Mechanics Conference, Poland, Gliwice 2012.
• [32] Lipecki T., Oddziaływanie wiatru na budynki wysokie w świetle badań własnych i ujęć normowych, Budownictwo i Architektura, Vol. 12(2), 2013, 143-150.
• [33] Bęc J., Lipecki T, Błazik-Borowa E., Research on wind structure in the wind tunnel of Wind Engineering Laboratory of Cracow University of Technology, Journal of Physics: Conference Series 318, 072003, doi: 10.1088/1742-6596/318/7/072003, 2011.