Fabrication of Multilayer Cu/Ni Systems with Nanometric Layers by Electrolysis Method

• Autorzy: Spilka M. , Babilas R. , Ratuszek W. , Kowalska J. , Matus K.

Identyfikatory

DOI

10.24425/amm.2018.125144

• Języki publikacji: EN

Abstrakty

EN

The paper presents research results of multilayer systems composed of alternate Cu/Ni layers. The layers thickness obtained by the galvanic treatment was determined by using the transmission electron microscopy and X-ray diffraction method in the grazing incidence diffraction geometry. The surface morphology was observed using scanning electron microscope with EDS microanalysis. Observation of the surface topography of systems using the atomic force microscope was also carried out.

Słowa kluczowe

EN

Cu/Ni multilayer systems; galvanic method; thickness measurement; surface morphology; topography

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 4
• Strony: 2067--2073
• Opis fizyczny: Bibliogr. 16 poz., fot., rys., tab., wzory

Twórcy

autor

Spilka M.

• Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Babilas R.

• Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Ratuszek W.

• AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Department of Physical and Powder Metallurgy, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kowalska J.

• AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Department of Physical and Powder Metallurgy, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Matus K.

• Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] A. Zawadzka, Cienkie warstwy i nanostruktury cienkowarstwowe - eksperymentalne metody wytwarzania i badania własności, Wydawnictwo Naukowe Uniwersytetu Mikołaja Kopernika, Toruń (2016) (in Polish).
• [2] H. Kuru, H. Kockar, M. Alper, J. Magn. Magn. Mater. 444, 132-139 (2017), DOI:10.1016/j.jmmm.2017.08.019.
• [3] A. Tekgül, M. Alper, H. Kockar, M. Haciismailoglu, J. Mater. Sci.: Mater. Electron. 26, 2411-2417 (2015), DOI: 10.1007/s10854-015-2699-7.
• [4] L. Péter, K. Vad, A. Csik, R. Muñíz, L. Lobo, R. Pereiro, S. Šturm, K. Žužek Rožman, G. Molnár, K. Németh, K. Neuróhr, K. Boros, L. Pogány, I. Bakonyi, J. Electrochem. Sci. Eng. 8 (1), 49-71 (2018), DOI: http://dx.doi.org/10.5599/jese.480.
• [5] M. Spilka, A. Kania, R. Nowosielski, A. Maciej, Metalurgija 56 (3-4), 389-392 (2017).
• [6] M. Gągorowska, M. Duś-Sitek, Arch. Metall. Mater. 53 (3), 909-917 (2008).
• [7] Q. Zhou, J.Y. Xie, F. Wang, P. Huang, K.W. Xu, T.J. Lu, Acta Mech. Sin. 31 (3), 319-337 (2015), DOI:10.1007/s10409-015-0401-1.
• [8] S. Esmaili, Inter. Res. J. App. Basic Sci. 9 (11), 1937-1940 (2015).
• [9] E. Łągiewka, A. Budniok, Struktura, właściwości i metody badań materiałów otrzymanych elektrolitycznie, Wydawnictwo Uniwersytetu Śląskiego, Katowice (2010) (in Polish).
• [10] E. Wilhelms, F. Dehchar, R. Jordberg, M. Kjellberg, J. Stjärnesund, P. Söderbäck, Electrochemical deposition of multi- and single layer coatings, Uppsala Universitet, Sweden (2015).
• [11] S. J. Skrzypek, M. Witkowska, J. Kowalska, K. Chruściel, Solid State Phenom. 163, 9-12 (2010), DOI:10.4028/www.scientific.net/SSP.163.9.
• [12] S. J. Skrzypek, M. Goły, J. Kowalska, K. Chruściel, Hutnik – Wiadomości Hutnicze 79 (4), 238-246 (2012) (in Polish).
• [13] Q. Yang, L. R. Zhao, Mater. Charact. 59, 1285-1291 (2008).
• [14] B. Kucharska, E. Kulej, Arch. Metall. Mater. 55 (1), 45-51 (2010).
• [15] H. C. Barshilia, K. S. Rajam, Surf. Coat. Tech. 155, 195-202 (2002).
• [16] B. Kucharska, E. Kulej, M. Gwoździk, Arch. Metall. Mater. 57 (3), 671-677 (2012), DOI:10.2478/v10172-012-0072-x.

Uwagi

EN

This publication was financed by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering SUT.