The effect of the Kenaf natural fiber on enhancing the mechanical properties of bio-composites materials used in civil engineering

• Autorzy: Bouguenina O. , Mokaddem A. , Doumi B. , Berber M. , Boutaous A.
• Języki publikacji: EN

Abstrakty

EN

In this work, we have investigated the effect of the natural Kenaf reinforcement on the improvement of the interfacile bond between two types of epoxy and Polypropylene (PP) matrix. Our genetic model is based on Weibull’s probabilistic models and on Cox’s interface model. The moisture content for each material is determined by Fick’s law. Our simulation results show that the most resistant interface is that of Kenaf-Polypropylene compared to the other interfaces. This result coincides perfectly with the experimental data found by Paul Wambua et al. Which have shown that Kenaf is a promoter fiber for the improvement of the mechanical properties of biocomposite used in the field of civil engineering.

Słowa kluczowe

EN

kenaf; biocomposite; fiber; epoxy; polypropylene; genetic algorithm

PL

kenaf; biokompozyt; włókno; epoksydy; polipropylen; algorytm genetyczny

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2018
• Tom: Vol. 22, nr 1
• Strony: 301--311
• Opis fizyczny: Bibliogr. 31 poz., 1 fot. kolor., wykr.

Twórcy

autor

Bouguenina O.

• Centre Universitaire Nour Bachir El Bayadh, 32000, Algerie

autor

Mokaddem A.

• Centre Universitaire Nour Bachir El Bayadh, 32000, Algerie

autor

Doumi B.

• Faculty of Sciences, Department of Physics, Dr Tahar Moulay University of Saida, 20000 Saida

autor

Berber M.

• Institute of Technology, University Center, El-Bayadh, Algeria

autor

Boutaous A.

• Faculte de Physique, Universite des Sciences et de la Technologie, Mohamed-Boudiaf, el Mnaouar, BP 1505, Bir El Djir 31000, Oran, Algerie

Bibliografia

• [1] Iump de Troyes: www.iump.fr, CNISAM: www.cnisam.fr www.reptox.csst.qc.ca www.inies.fr-www.inrs.fr
• [2] http://www.commodafrica.com/23-04-2012-le-potentiel-du-kenaf-comme-materiau-de-construction
• [3] Mabberley, D. J.: The Plant Book. A portable dictionary of the higher plants, Cambridge University Press, 706, 1987.
• [4] Paridah, T., Basher, A. B., SaifulAzry, S., Zakiah, A.: Retting Process Of Some Bast Plant Fibres And Its Effect On Fibre Quality: A Review , BioResources, 6, 5260–5281, 2011.
• [5] Nanko, H., Button, A., Hillman, D.: The World of Market Pulp. Appleto US WOMP, 258, 2005.
• [6] Sanadi, A. R., Daniel, F. C., Rodney, E. J., Roger, M. R., :Renewable Agrcultural Fibers as Reinforcing Fillers in Plastics: Mechanical Properties of Kenaf Fiber-Polypropylene Composites, Industrial & Engineering Chemistry Research , 34, 1889–96, 1995.
• [7] Vidhya, N., Amar, K. M., Manjusri, M.: Sustainable Green Composites: Value Addition to Agricultural Residues and Perennial Grasses, ACS Sustainable Chem. En., 3, 325-333, 2013.
• [8] Rymsza, T. A.: Advancements of Kenaf in the USA-Kenaf Paper and Nonpaper Developments, http://www.visionpaper.com/PDF speeches papers/007anwpp.pdf , 2000.
• [9] Okuda, N., Masatoshi, S.: Manufacture and Mechanical Properties of Binderless Boards from Kenaf Core, Journal of Wood Science, 50, 53–61, 2004.
• [10] Symington, M. C., Banks, W. M., West, O. D., Pethrick, R. A.: Tensile Testing of Cellulose Based Natural Fibers for Structural Composite Applications, Journal of Composite Materials, 43, 1083–1108, 2009.
• [11] Wambua, P., Ivens, J., Verpoest, I.: Natural Fibres: Can They Replace Glass in Fibre Reinforced Plastics?, Composites Science and Technology, 63, 1259–1264, 2003.
• [12] Webber, C. L., Venita, K. B., Robert, E. B.: Kenaf Harvesting and Processing, Trends in New Crops and New Uses, 9, 340–347, 2002.
• [13] Sheldon, A.: Preliminary Evaluation of Kenaf as a Structural Material, Clemson University Tiger Prints All Theses, 97, 3-57, 2014.
• [14] Almn, A.: Fibers for Strengthering of Timber Structures, Lulea University of Technology, Department of Civil and Environmental Engineering,3, 1402-1528, 2006.
• [15] Market Study.: Polypropylene (3rd edition), Ceresana, 2017.
• [16] Stinson, S.: Discoverers of Polypropylene Share Prize, Chemical & Engineering News American Chemical Society, 65, 1-30, 1987.
• [17] Morris, P. J. T.: Polymer Pioneers: A Popular History of the Science and Technology of Large Molecules, Chemical Heritage Foundation, 1-76, 2005.
• [18] Tripathi, D.: Practical guide to polypropylene, Shrewsbury RAPRA Technoly, 2001.
• [19] Porex, C.: Polypropylene Plastic Materials & Fibers, www.porex.com, 2016.
• [20] Clive, M.: Polypropylene : the definitive user’s guide and databook, ISBN 978-1-884207-58-7, 432p, 1998.
• [21] München, H.: Kaiser, Wolfgang Kunststoffchemie für Ingenieure von der Synthese bis zur Anwendung, ISBN 978-3-446-43047-1, 2011.
• [22] Koltzenburg, S., Maskos, M., Nuyken, O.: Polymere: Synthese, Eigenschaften und Anwendungen, Springer, ISBN 978-3642347726, 2013.
• [23] Cacciari, I., Quatrini, P., Zirletta, G., Mincione, E., Vinciguerra, V., Lupattelli P., Giovannozzi, S. G.: Isotactic polypropylene biodegradation by a microbial community: physicochemical characterization of metabolites produced, Applied and Environmental Microbiology, 59, 3695–3700, 1993.
• [24] Cox, H. L. : The elasticity and strength of paper and other fibrous materials. British journal of applied physics, 12, 72-79, 1952
• [25] Nu~nez, M., Villanueva, M.: Influence of the curing cycle selection on the thermal degradation of an epoxy-diamide system, Journal of thermal analysis and calorimetry, 80, 718–780, 2001.
• [26] Diamant, Y., Marom, G., Broutman, L. J.: The effect of network structure on moisture absorption of epoxy resins, J. Polym. Sci., 26,3015-3025, 1981.
• [27] Adamson, M. J.: Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite material s, J. Mater. Sci,.15, 1736-1745, 1980.
• [28] Apicella, A., Egiziano, L., Nicolais, L., Tucci, V.: Environmental degradation of electrical and thermal properties of organic insulating materials, J. Mater. Sci, 23, 729–735, 1988.
• [29] Temimi, L., Mokaddem, A., Belkaid, N., Boutaous, A., Bouamrane, R.: Study of the effect of water intake by the matrix on the optimization of the fiber matrix interface damage for a composite material by genetic algorithms, Strength of materials, 45, 739–747, 2013.
• [30] Weibull, W.: Theory of the strength of materials, Royal Swedish Academy of Eng. Sci. Proc, 151, 1–45, 1939.
• [31] Attmane, A., Mokaddem, A., Doumi, B., Boutaleb, M., Temimi, L., Boutaous, A.: Study and localization by the nonlinear acoustic technique of the damage to the fiber-matrix interface of a Bio-composite , Mechanics and Mechanical Engineering, 21, 453–465, 2017.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).