Compared analysis of the non-destructive inspection methods and the imperfections that can be highlighted

• Autorzy: Burian C. , Mindru T.
• Języki publikacji: EN

Abstrakty

EN

To ensure the quality of the welded joints on the pipes, instead of one procedure for non-destructive inspection, many times, two or more procedures are used, which complete each other. That is why it is important to have several procedures for the non-destructive inspection. The compared analysis is performed on the following methods: visual, with penetrating liquids, with magnetic powders, with rotational currents, with X-ray radiation. There are other methods as well, without being analyzed in this paper, such as: acoustic inspection of ceramics and axles, with thermal flow, acoustic emission analysis and tightness test with gas.

Słowa kluczowe

EN

nondestructive testing; welded joint; pipe

PL

badania nieniszczące; złącze spawane; rura

• Wydawca: Instytut Automatyzacji Procesów Technologicznych i Zintegrowanych Systemów Wytwarzania Politechniki Śląskiej
• Czasopismo: Selected Engineering Problems
• Rocznik: 2012
• Tom: nr 3
• Strony: 35--40
• Opis fizyczny: Bibliogr. 20 poz.

Twórcy

autor

Burian C.

autor

Mindru T.

• „Gheorghe Asachi” Technical University of Iasi, Iasi, Romania

Bibliografia

• 1. SR EN 13927 – Non-destructive inspections. Visual inspection. Equipment
• 2. SR EN ISO 6520 – Classification of geometric imperfections within the welded joints of metallic materials.
• 3. ASME, Sect.V si VIII, Ed. 2010 – Visual inspection
• 4. SR EN 1330-1 – Non-destructive inspection. Terminology. Part 1: List of general terms.
• 5. SR EN 1330-2 – Non-destructive inspection. Terminology. Part 2: Common terms for non-destructive inspection methods
• 6. SR EN 1330-10 – Non-destructive inspection. Terminology. Part 10: Terms used for visual inspection.
• 7. SR EN 12062/A2/A3, Non-destructive inspection of welds. General rules for metallic materials.
• 8. SR EN 571-1 Non-destructive inspection. Inspection with penetrating liquids. Part 1: General Principles
• 9. SR EN ISO 3059 Non-destructive inspection. Inspection with penetrating liquids and magnetic powders. Observation conditions.
• 10. SR EN ISO 3452-4 Non-destructive inspection. Inspection with penetrating liquids. Part 4: Equipment.
• 11. SR EN ISO 3452-5 Non-destructive inspection. Inspection with penetrating liquids. Part 5: Inspection with penetrating liquids at temperatures exceeding 50 degrees Celsius
• 12. SR EN ISO 3452-6 Non-destructive inspection. Inspection with penetrating liquids. Part 6: Inspection with penetrating liquids at temperatures lower than 10 degrees Celsius
• 13. SR ISO 4386-3 Slip bearing. Multi-layer metallic slip bearing. Part 3: Non-destructive inspection with penetrating liquids.
• 14. STAS 10041-90 Fault Detection with penetrating liquids. Terminology
• 15. SR EN 10228-2 Non-destructive examination of forged steel parts. Part 2: Examination with penetrating liquids
• 16. SR EN ISO 10893-4 Non-destructive examination of steel pipes. Part 4: Examinationwith penetrating liquids for the detection of imperfections on the surface of welded steel pipes and steel pipes without welds.
• 17. SR EN 444 “Non-destructive inspection. General Principles”
• 18. SR EN 462/1,/2,/3,/4Radiogram image quality, quality indicators”
• 19. EN 584/1/2 “Classification and processing of radiogram films”.
• 20. EN 25580 “Negatoscope”